From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754209AbbA2PFH (ORCPT ); Thu, 29 Jan 2015 10:05:07 -0500 Received: from keetweej.vanheusden.com ([80.101.105.103]:39894 "EHLO keetweej.vanheusden.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752195AbbA2PFF (ORCPT ); Thu, 29 Jan 2015 10:05:05 -0500 X-Greylist: delayed 507 seconds by postgrey-1.27 at vger.kernel.org; Thu, 29 Jan 2015 10:05:05 EST Date: Thu, 29 Jan 2015 15:56:36 +0100 From: folkert To: linux-kernel@vger.kernel.org Subject: [3.18.3] poll() on gpio pins broken Message-ID: <20150129145636.GU21469@belle.intranet.vanheusden.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: www.smartwinning.info X-Chameleon-Return-To: folkert@vanheusden.com X-Xfmail-Return-To: folkert@vanheusden.com X-Phonenumber: +31-6-41278122 X-URL: http://www.vanheusden.com/ X-PGP-KeyID: 1F077C42 X-GPG-fingerprint: AC89 09CE 41F2 00B4 FCF2 B174 3019 0E8C 1F28 D8AE X-Key: http://pgp.surfnet.nl:11371/pks/lookup?op=get&search=0x1F077C42 Read-Receipt-To: Reply-By: Thu Jan 22 15:15:45 CET 2015 User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, For timekeeping I wrote a program which waits for interrupts on gpio-pins and then tells the local ntp daemon the clock offset. I'm aware of the pps support in recent kernel but that does not work (yet) on all platforms (eg cubieboard 1). This has worked for quite some time but no longer. Until at least kernel 3.12 I could do: // export gpio pin // set direction to in // set direction to rising int fd = open("/sys.../value", O_RDONLY); fdset[0].fd = fd; fdset[0].events = POLLPRI; fdset[0].revents = 0; poll(fdset, 1, -1); // at this point pin went high So: I would setup a gpio-pin using /sys-files, and then use poll() to wait for the interrupt triggered by the level of the gpio pin going high. This worked fine on all raspberry pi's I tried, a nanos g20, a beagle bone black and a cubieboard 1. Since kernel 3.18.3 (.4 as well) this no longer works: 1422542104.894908947] interrupt #2459, offset -0.105091s 1422542104.895162937] interrupt #2460, offset -0.104837s 1422542104.895408928] interrupt #2461, offset -0.104591s 1422542104.895650919] interrupt #2462, offset -0.104349s 1422542104.896293896] interrupt #2463, offset -0.103706s ... As you can see suddenly the poll returns immediately. strace learns me: poll([{fd=3, events=POLLPRI}], 1, -1) = 1 ([{fd=3, revents=POLLPRI|POLLERR}]) So apparently somewhere between 3.12 and 3.18 it is no longer allowed/possible to do poll() on a gpio-pin value device. Am I right that something broke the abi? Or have I been doing it wrong and did that became visible? Please advise. thanks Folkert van Heusden --