From: Eduardo Valentin <edubezval@gmail.com>
To: Nishanth Menon <nm@ti.com>
Cc: Zhang Rui <rui.zhang@intel.com>,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
Guenter Roeck <linux@roeck-us.net>
Subject: Re: [PATCH] thermal: Introduce dummy functions when thermal is not defined
Date: Tue, 24 Feb 2015 14:38:36 -0400 [thread overview]
Message-ID: <20150224183830.GE3448@developer.amazonguestwifi.org> (raw)
In-Reply-To: <1423877282-4589-1-git-send-email-nm@ti.com>
[-- Attachment #1: Type: text/plain, Size: 4273 bytes --]
Rui,
On Fri, Feb 13, 2015 at 07:28:02PM -0600, Nishanth Menon wrote:
> When CONFIG_THERMAL is not enabled, it is better to introduce
> equivalent dummy functions in the exported header than to
> introduce #ifdeffery in drivers using the function.
>
> This will prevent issues such as that reported in:
> http://www.spinics.net/lists/linux-next/msg31573.html
>
> While at it switch over to IS_ENABLED for thermal macros
> to allow for thermal framework to be built as framework
> and relevant APIs be usable by relevant drivers as a result.
>
> Reported-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Nishanth Menon <nm@ti.com>
I am collecting this one and queuing in my -fixes branch.
> ---
>
> based on next-20150213 tag.
>
> Note: there are a few "CHECK: Alignment should match open parenthesis"
> checkpatch warnings which I ignored since these are pure dummy
> functions anyways.
>
> include/linux/thermal.h | 56 +++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index fc52e307efab..5eac316490ea 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -314,6 +314,8 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
> }
>
> #endif
> +
> +#if IS_ENABLED(CONFIG_THERMAL)
> struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
> void *, struct thermal_zone_device_ops *,
> const struct thermal_zone_params *, int, int);
> @@ -340,8 +342,58 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
> struct thermal_cooling_device *, int);
> void thermal_cdev_update(struct thermal_cooling_device *);
> void thermal_notify_framework(struct thermal_zone_device *, int);
> -
> -#ifdef CONFIG_NET
> +#else
> +static inline struct thermal_zone_device *thermal_zone_device_register(
> + const char *type, int trips, int mask, void *devdata,
> + struct thermal_zone_device_ops *ops,
> + const struct thermal_zone_params *tzp,
> + int passive_delay, int polling_delay)
> +{ return ERR_PTR(-ENODEV); }
> +static inline void thermal_zone_device_unregister(
> + struct thermal_zone_device *tz)
> +{ }
> +static inline int thermal_zone_bind_cooling_device(
> + struct thermal_zone_device *tz, int trip,
> + struct thermal_cooling_device *cdev,
> + unsigned long upper, unsigned long lower)
> +{ return -ENODEV; }
> +static inline int thermal_zone_unbind_cooling_device(
> + struct thermal_zone_device *tz, int trip,
> + struct thermal_cooling_device *cdev)
> +{ return -ENODEV; }
> +static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
> +{ }
> +static inline struct thermal_cooling_device *
> +thermal_cooling_device_register(char *type, void *devdata,
> + const struct thermal_cooling_device_ops *ops)
> +{ return ERR_PTR(-ENODEV); }
> +static inline struct thermal_cooling_device *
> +thermal_of_cooling_device_register(struct device_node *np,
> + char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
> +{ return ERR_PTR(-ENODEV); }
> +static inline void thermal_cooling_device_unregister(
> + struct thermal_cooling_device *cdev)
> +{ }
> +static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
> + const char *name)
> +{ return ERR_PTR(-ENODEV); }
> +static inline int thermal_zone_get_temp(
> + struct thermal_zone_device *tz, unsigned long *temp)
> +{ return -ENODEV; }
> +static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
> +{ return -ENODEV; }
> +static inline struct thermal_instance *
> +get_thermal_instance(struct thermal_zone_device *tz,
> + struct thermal_cooling_device *cdev, int trip)
> +{ return ERR_PTR(-ENODEV); }
> +static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
> +{ }
> +static inline void thermal_notify_framework(struct thermal_zone_device *tz,
> + int trip)
> +{ }
> +#endif /* CONFIG_THERMAL */
> +
> +#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
> extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
> enum events event);
> #else
> --
> 1.7.9.5
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
prev parent reply other threads:[~2015-02-24 18:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-14 1:28 Nishanth Menon
2015-02-24 18:38 ` Eduardo Valentin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150224183830.GE3448@developer.amazonguestwifi.org \
--to=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=nm@ti.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®