Re: [PATCH V4 2/2] spmi: pmic_arb: add support for hw version 2

[Gilad Avidov <gavidov@codeaurora.org>]

Hi Ivan,

On Tue, 24 Feb 2015 13:01:08 +0200
"Ivan T. Ivanov" <iivanov@mm-sol.com> wrote:

> 
> Hi Gilad,
> 
> One more comment :-).
> 
> On Thu, 2015-02-19 at 15:54 -0700, Gilad Avidov wrote:
> 
> <snip>
> 
> 
> -static int pmic_arb_wait_for_done(struct spmi_controller *ctrl)
> +static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> +                                               void __iomem *base,
> u8 sid, u16 addr) {
>         struct spmi_pmic_arb_dev *dev =
> spmi_controller_get_drvdata(ctrl); u32 status = 0;
>         u32 timeout = PMIC_ARB_TIMEOUT_US;
> -       u32 offset = PMIC_ARB_STATUS(dev->channel);
> +       u32 offset = dev->ver_ops->offset(dev, sid, addr) +
> PMIC_ARB_STATUS;
> 
> 
>         while (timeout--) {
>                 status = pmic_arb_base_read(dev, offset);
> 
> I see that downstream driver is using read or write base address
> based on operation for which we are waiting (read_cmd/write_cmd).
> 
> Should this be reflected here?

Good catch, it should (although it still works fine). 
I'll fix that.

Gilad.

> 
> Ivan.
>