From: Rik van Riel <riel@surriel.com>
To: linux-kernel@vger.kernel.org
Cc: Andy Lutomirsky <amluto@amacapital.com>,
Frederic Weisbecker <fweisbec@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
williams@redhat.com
Subject: [PATCH v2] context_tracking: remove local_irq_save from __acct_update_integrals
Date: Fri, 24 Apr 2015 11:16:53 -0400 [thread overview]
Message-ID: <20150424111653.2a87a103@annuminas.surriel.com> (raw)
The function __acct_update_integrals() is called both from irq context
and task context. This creates a race where irq context can advance
tsk->acct_timexpd to a value larger than time, leading to a negative
value, which causes a divide error. See commit 6d5b5acca9e5
("Fix fixpoint divide exception in acct_update_integrals")
In 2012, __acct_update_integrals() was changed to get utime and stime
as function parameters. This re-introduced the bug, because an irq
can hit in-between the call to task_cputime() and where irqs actually
get disabled.
However, this race condition was originally reproduced on Hercules,
and I have not seen any reports of it re-occurring since it was
re-introduced 3 years ago.
On the other hand, the irq disabling and re-enabling, which no longer
even protects us against the race today, show up prominently in the
perf profile of a program that makes a very large number of system calls
in a short period of time, when nohz_full= (and context tracking) is
enabled.
This patch replaces the (now ineffective) irq blocking with a cheaper
way to test for the race condition, and speeds up my microbenchmark
with 10 million iterations, average of 5 runs, tiny stddev:
run time system time
vanilla 5.49s 2.08s
patch 5.21s 1.92s
Cc: Andy Lutomirsky <amluto@amacapital.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
---
V2: introduce signed_cputime_t to deal with 64 bit cputime_t on
32 bit architectures, and use READ_ONCE to ensure the value
is always read atomically (Heiko Karstens)
arch/powerpc/include/asm/cputime.h | 3 +++
arch/s390/include/asm/cputime.h | 3 +++
include/asm-generic/cputime_jiffies.h | 2 ++
include/asm-generic/cputime_nsecs.h | 3 +++
kernel/tsacct.c | 18 ++++++++++++------
5 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index e2452550bcb1..e41b32f68a2c 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -32,6 +32,9 @@ static inline void setup_cputime_one_jiffy(void) { }
typedef u64 __nocast cputime_t;
typedef u64 __nocast cputime64_t;
+typedef s64 signed_cputime_t;
+typedef s64 signed_cputime64_t;
+
#define cmpxchg_cputime(ptr, old, new) cmpxchg(ptr, old, new)
#ifdef __KERNEL__
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 221b454c734a..2e8c268cc2a7 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -18,6 +18,9 @@
typedef unsigned long long __nocast cputime_t;
typedef unsigned long long __nocast cputime64_t;
+typedef signed long long signed_cputime_t;
+typedef signed long long signed_cputime64_t;
+
#define cmpxchg_cputime(ptr, old, new) cmpxchg64(ptr, old, new)
static inline unsigned long __div(unsigned long long n, unsigned long base)
diff --git a/include/asm-generic/cputime_jiffies.h b/include/asm-generic/cputime_jiffies.h
index fe386fc6e85e..b96b6a1b6c97 100644
--- a/include/asm-generic/cputime_jiffies.h
+++ b/include/asm-generic/cputime_jiffies.h
@@ -2,6 +2,7 @@
#define _ASM_GENERIC_CPUTIME_JIFFIES_H
typedef unsigned long __nocast cputime_t;
+typedef signed long signed_cputime_t;
#define cmpxchg_cputime(ptr, old, new) cmpxchg(ptr, old, new)
@@ -11,6 +12,7 @@ typedef unsigned long __nocast cputime_t;
#define jiffies_to_cputime(__hz) (__force cputime_t)(__hz)
typedef u64 __nocast cputime64_t;
+typedef s64 signed_cputime_t;
#define cputime64_to_jiffies64(__ct) (__force u64)(__ct)
#define jiffies64_to_cputime64(__jif) (__force cputime64_t)(__jif)
diff --git a/include/asm-generic/cputime_nsecs.h b/include/asm-generic/cputime_nsecs.h
index 0419485891f2..c1ad2f90a4d9 100644
--- a/include/asm-generic/cputime_nsecs.h
+++ b/include/asm-generic/cputime_nsecs.h
@@ -21,6 +21,9 @@
typedef u64 __nocast cputime_t;
typedef u64 __nocast cputime64_t;
+typedef s64 signed_cputime_t;
+typedef s64 signed_cputime64_t;
+
#define cmpxchg_cputime(ptr, old, new) cmpxchg64(ptr, old, new)
#define cputime_one_jiffy jiffies_to_cputime(1)
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 975cb49e32bf..1bebe0339ac1 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -126,23 +126,29 @@ static void __acct_update_integrals(struct task_struct *tsk,
if (likely(tsk->mm)) {
cputime_t time, dtime;
struct timeval value;
- unsigned long flags;
u64 delta;
- local_irq_save(flags);
time = stime + utime;
- dtime = time - tsk->acct_timexpd;
+ dtime = time - READ_ONCE(tsk->acct_timexpd);
+ /*
+ * This code is called both from irq context and from
+ * task context. There is a race where irq context advances
+ * tsk->acct_timexpd to a value larger than time, creating
+ * a negative value. In that case, the irq has already
+ * updated the statistics.
+ */
+ if (unlikely((signed_cputime_t)dtime <= 0))
+ return;
+
jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
delta = value.tv_sec;
delta = delta * USEC_PER_SEC + value.tv_usec;
if (delta == 0)
- goto out;
+ return;
tsk->acct_timexpd = time;
tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
- out:
- local_irq_restore(flags);
}
}
next reply other threads:[~2015-04-24 15:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-24 15:16 Rik van Riel [this message]
2015-04-25 9:43 ` Heiko Carstens
2015-04-25 12:50 ` Rik van Riel
2015-04-27 11:18 ` Heiko Carstens
2015-04-28 12:53 ` Rik van Riel
2015-04-28 13:57 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150424111653.2a87a103@annuminas.surriel.com \
--to=riel@surriel.com \
--cc=amluto@amacapital.com \
--cc=fweisbec@redhat.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=williams@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®