From: Dan Williams <dan.j.williams@intel.com>
To: axboe@kernel.dk
Cc: Herbert Xu <herbert@gondor.apana.org.au>,
Vinod Koul <vinod.koul@intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
hch@lst.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] scatterlist: cleanup sg_chain() and sg_unmark_end()
Date: Tue, 09 Jun 2015 12:27:15 -0400 [thread overview]
Message-ID: <20150609162715.21910.77696.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <20150609162659.21910.41681.stgit@dwillia2-desk3.amr.corp.intel.com>
Replace open coded sg_chain() and sg_unmark_end() instances with the
aforementioned helpers.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
block/blk-merge.c | 2 +-
drivers/crypto/omap-sham.c | 2 +-
drivers/dma/imx-dma.c | 8 ++------
drivers/dma/ste_dma40.c | 5 +----
drivers/mmc/card/queue.c | 4 ++--
include/crypto/scatterwalk.h | 9 ++-------
6 files changed, 9 insertions(+), 21 deletions(-)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index fd3fee81c23c..7bb4f260ca4b 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -266,7 +266,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
if (rq->cmd_flags & REQ_WRITE)
memset(q->dma_drain_buffer, 0, q->dma_drain_size);
- sg->page_link &= ~0x02;
+ sg_unmark_end(sg);
sg = sg_next(sg);
sg_set_page(sg, virt_to_page(q->dma_drain_buffer),
q->dma_drain_size,
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 4d63e0d4da9a..df8b23e19b90 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -582,7 +582,7 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
* the dmaengine may try to DMA the incorrect amount of data.
*/
sg_init_table(&ctx->sgl, 1);
- ctx->sgl.page_link = ctx->sg->page_link;
+ sg_assign_page(&ctx->sgl, sg_page(ctx->sg));
ctx->sgl.offset = ctx->sg->offset;
sg_dma_len(&ctx->sgl) = len32;
sg_dma_address(&ctx->sgl) = sg_dma_address(ctx->sg);
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index eed405976ea9..081fbfc87f6b 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -886,18 +886,14 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic(
sg_init_table(imxdmac->sg_list, periods);
for (i = 0; i < periods; i++) {
- imxdmac->sg_list[i].page_link = 0;
- imxdmac->sg_list[i].offset = 0;
+ sg_set_page(&imxdmac->sg_list[i], NULL, period_len, 0);
imxdmac->sg_list[i].dma_address = dma_addr;
sg_dma_len(&imxdmac->sg_list[i]) = period_len;
dma_addr += period_len;
}
/* close the loop */
- imxdmac->sg_list[periods].offset = 0;
- sg_dma_len(&imxdmac->sg_list[periods]) = 0;
- imxdmac->sg_list[periods].page_link =
- ((unsigned long)imxdmac->sg_list | 0x01) & ~0x02;
+ sg_chain(imxdmac->sg_list, periods + 1, imxdmac->sg_list);
desc->type = IMXDMA_DESC_CYCLIC;
desc->sg = imxdmac->sg_list;
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 3c10f034d4b9..e8c00642cacb 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2562,10 +2562,7 @@ dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
dma_addr += period_len;
}
- sg[periods].offset = 0;
- sg_dma_len(&sg[periods]) = 0;
- sg[periods].page_link =
- ((unsigned long)sg | 0x01) & ~0x02;
+ sg_chain(sg, periods + 1, sg);
txd = d40_prep_sg(chan, sg, sg, periods, direction,
DMA_PREP_INTERRUPT);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 8efa3684aef8..fa525ee20470 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -469,7 +469,7 @@ static unsigned int mmc_queue_packed_map_sg(struct mmc_queue *mq,
sg_set_buf(__sg, buf + offset, len);
offset += len;
remain -= len;
- (__sg++)->page_link &= ~0x02;
+ sg_unmark_end(__sg++);
sg_len++;
} while (remain);
}
@@ -477,7 +477,7 @@ static unsigned int mmc_queue_packed_map_sg(struct mmc_queue *mq,
list_for_each_entry(req, &packed->list, queuelist) {
sg_len += blk_rq_map_sg(mq->queue, req, __sg);
__sg = sg + (sg_len - 1);
- (__sg++)->page_link &= ~0x02;
+ sg_unmark_end(__sg++);
}
sg_mark_end(sg + (sg_len - 1));
return sg_len;
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 20e4226a2e14..4529889b0f07 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -25,13 +25,8 @@
#include <linux/scatterlist.h>
#include <linux/sched.h>
-static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num,
- struct scatterlist *sg2)
-{
- sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
- sg1[num - 1].page_link &= ~0x02;
- sg1[num - 1].page_link |= 0x01;
-}
+#define scatterwalk_sg_chain(prv, num, sgl) sg_chain(prv, num, sgl)
+#define scatterwalk_sg_next(sgl) sg_next(sgl)
static inline void scatterwalk_crypto_chain(struct scatterlist *head,
struct scatterlist *sg,
next prev parent reply other threads:[~2015-06-09 16:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 16:27 [PATCH 0/2] scatterlist cleanups Dan Williams
2015-06-09 16:27 ` [PATCH 1/2] scatterlist: use sg_phys() Dan Williams
2015-06-10 0:34 ` Elliott, Robert (Server Storage)
2015-06-10 9:32 ` Joerg Roedel
2015-06-10 16:00 ` Dan Williams
2015-06-10 16:31 ` Russell King - ARM Linux
2015-06-10 16:57 ` Dan Williams
2015-06-10 17:13 ` Russell King - ARM Linux
2015-06-10 17:25 ` Dan Williams
2015-06-11 6:50 ` Joerg Roedel
2015-06-09 16:27 ` Dan Williams [this message]
2015-06-10 5:38 ` [PATCH 2/2] scatterlist: cleanup sg_chain() and sg_unmark_end() Herbert Xu
2015-06-11 7:31 ` Christoph Hellwig
2015-06-11 7:34 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150609162715.21910.77696.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=axboe@kernel.dk \
--cc=dmaengine@vger.kernel.org \
--cc=hch@lst.de \
--cc=herbert@gondor.apana.org.au \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®