From: Guenter Roeck <linux@roeck-us.net>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Simmons <jsimmons@infradead.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
driverdevel <devel@driverdev.osuosl.org>,
Oleg Drokin <oleg.drokin@intel.com>,
Andreas Dilger <andreas.dilger@intel.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
lustre-devel@lists.lustre
Subject: Re: [PATCH v4 4/9] staging:lustre: merge socklnd_lib-linux.h into socklnd.h
Date: Wed, 24 Jun 2015 18:33:46 -0700 [thread overview]
Message-ID: <20150625013346.GA13107@roeck-us.net> (raw)
In-Reply-To: <CAMuHMdV6e_0qKkAVwAuyFFMhGxqW5ekifEyKiZevRahgu+ozWQ@mail.gmail.com>
On Wed, Jun 24, 2015 at 02:37:51PM +0200, Geert Uytterhoeven wrote:
> Hi James,
>
> On Thu, Jun 11, 2015 at 9:18 PM, James Simmons <jsimmons@infradead.org> wrote:
> > From: John L. Hammond <john.hammond@intel.com>
> >
> > Originally socklnd_lib-linux.h contained linux specific
> > wrappers and defines but since the linux kernel is the
> > only supported platform now we can merge what little
> > remains in the header into socklnd.h. This is broken
> > out of the original patch 12932 that was merged to the
> > Intel/OpenSFS branch.
> >
> > Signed-off-by: John L. Hammond <john.hammond@intel.com>
> > Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
> > Reviewed-on: http://review.whamcloud.com/12932
> > Reviewed-by: Isaac Huang <he.huang@intel.com>
> > Reviewed-by: James Simmons <uja.ornl@gmail.com>
> > Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
> > Signed-off-by: James Simmons <jsimmons@infradead.org>
> > ---
> > .../staging/lustre/lnet/klnds/socklnd/socklnd.h | 39 +++++++++-
> > .../lustre/lnet/klnds/socklnd/socklnd_lib-linux.h | 86 --------------------
> > .../lustre/lnet/klnds/socklnd/socklnd_lib.c | 4 +-
> > 3 files changed, 40 insertions(+), 89 deletions(-)
> > delete mode 100644 drivers/staging/lustre/lnet/klnds/socklnd/socklnd_lib-linux.h
> >
> > diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
> > index 53275f9..7125eb9 100644
> > --- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
> > +++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
> > @@ -25,16 +25,40 @@
> > *
> > */
> >
> > +#ifndef _SOCKLND_SOCKLND_H_
> > +#define _SOCKLND_SOCKLND_H_
> > +
> > #define DEBUG_PORTAL_ALLOC
> > #define DEBUG_SUBSYSTEM S_LND
> >
> > -#include "socklnd_lib-linux.h"
> > +#include <asm/irq.h>
> > +#include <linux/crc32.h>
> > +#include <linux/errno.h>
>
> Including <asm/irq.h> first causes a build failure for m68k/allmodconfig:
>
> arch/m68k/include/asm/irq.h:77:12: error: expected '=', ',', ';',
> 'asm' or '__attribute__' before 'void'
> arch/m68k/include/asm/irq.h:78:1: error: unknown type name 'atomic_t'
> arch/m68k/include/asm/irq.h:77:12: error: expected '=', ',', ';',
> 'asm' or '__attribute__' before 'void'
> arch/m68k/include/asm/irq.h:78:1: error: unknown type name 'atomic_t'
>
> http://kisskb.ellerman.id.au/kisskb/buildresult/12448922/
>
> Fixing it inside arch/m68k/include/asm/irq.h might cause Include Hell,
> so perhaps you can just move the <asm/*> include below all <linux/*>
> includes?
>
Hi Geert,
I have not tested it, but I think the following may fix the problem
while avoiding any include problems. Since pt_regs is used in the file,
one could argue that it should be declared.
Thanks,
Guenter
--
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 81ca118d58af..28ffa8d59cf0 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -74,6 +74,8 @@ extern unsigned int irq_canonicalize(unsigned int irq);
#define irq_canonicalize(irq) (irq)
#endif /* !(CONFIG_M68020 || CONFIG_M68030 || CONFIG_M68040 || CONFIG_M68060) */
+struct pt_regs;
+
asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
extern atomic_t irq_err_count;
next prev parent reply other threads:[~2015-06-25 1:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-11 19:18 [PATCH 0/9] staging:lustre: remove kernel defines in userland headers James Simmons
2015-06-11 19:18 ` [PATCH v4 1/9] staging:lustre: Delete all obsolete LND drivers James Simmons
2015-06-11 19:18 ` [PATCH v4 2/9] staging:lustre: remove lnet/include/lnet/linux/ James Simmons
2015-06-11 19:18 ` [PATCH v4 3/9] staging:lustre: rename socklnd_lib-linux.c James Simmons
2015-06-11 19:18 ` [PATCH v4 4/9] staging:lustre: merge socklnd_lib-linux.h into socklnd.h James Simmons
2015-06-24 12:37 ` Geert Uytterhoeven
2015-06-25 1:33 ` Guenter Roeck [this message]
2015-06-25 6:37 ` Geert Uytterhoeven
2015-06-25 15:02 ` Simmons, James A.
2015-06-25 15:06 ` Simmons, James A.
2015-06-11 19:18 ` [PATCH v4 5/9] staging:lustre: move LNet NID macros to LNet layer James Simmons
2015-06-11 19:18 ` [PATCH v4 6/9] staging:lustre: separate kernel and user land defines in the LNet headers James Simmons
2015-06-11 19:18 ` [PATCH v4 7/9] staging:lustre: fix camel case for LNetInit and LNetFini James Simmons
2015-06-11 19:18 ` [PATCH v4 8/9] staging:lustre: LNet header code cleanup - indentation etc James Simmons
2015-06-11 19:18 ` [PATCH v4 9/9] staging:lustre: Update license and copyright for the LNET headers James Simmons
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150625013346.GA13107@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andreas.dilger@intel.com \
--cc=devel@driverdev.osuosl.org \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=jsimmons@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lustre-devel@lists.lustre \
--cc=oleg.drokin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®