From: Dan Williams <dan.j.williams@intel.com>
To: linux-nvdimm@ml01.01.org
Cc: linux-acpi@vger.kernel.org, ross.zwisler@linux.intel.com,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/6] nfit: add support for NVDIMM "latch" flag
Date: Sat, 11 Jul 2015 10:41:09 -0400 [thread overview]
Message-ID: <20150711144109.25013.53374.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <20150711142806.25013.16924.stgit@dwillia2-desk3.amr.corp.intel.com>
From: Ross Zwisler <ross.zwisler@linux.intel.com>
Add support in the NFIT BLK I/O path for the "latch" flag
defined in the "Get Block NVDIMM Flags" _DSM function:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
This flag requires the driver to read back the command register after it
is written in the block I/O path. This ensures that the hardware has
fully processed the new command and moved the aperture appropriately.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/acpi/nfit.c | 33 ++++++++++++++++++++++++++++++++-
drivers/acpi/nfit.h | 5 +++++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index 11aa513f2fda..628a42c41ab1 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -1059,7 +1059,9 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
writeq(cmd, mmio->base + offset);
wmb_blk(nfit_blk);
- /* FIXME: conditionally perform read-back if mandated by firmware */
+
+ if (nfit_blk->dimm_flags & ND_BLK_DCR_LATCH)
+ readq(mmio->base + offset);
}
static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk,
@@ -1266,6 +1268,28 @@ static int nfit_blk_init_interleave(struct nfit_blk_mmio *mmio,
return 0;
}
+static int acpi_nfit_blk_get_flags(struct nvdimm_bus_descriptor *nd_desc,
+ struct nvdimm *nvdimm, struct nfit_blk *nfit_blk)
+{
+ struct nd_cmd_dimm_flags flags;
+ int rc;
+
+ memset(&flags, 0, sizeof(flags));
+ rc = nd_desc->ndctl(nd_desc, nvdimm, ND_CMD_DIMM_FLAGS, &flags,
+ sizeof(flags));
+
+ if (rc >= 0 && flags.status == 0)
+ nfit_blk->dimm_flags = flags.flags;
+ else if (rc == -ENOTTY) {
+ /* fall back to a conservative default */
+ nfit_blk->dimm_flags = ND_BLK_DCR_LATCH;
+ rc = 0;
+ } else
+ rc = -ENXIO;
+
+ return rc;
+}
+
static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
struct device *dev)
{
@@ -1340,6 +1364,13 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
return rc;
}
+ rc = acpi_nfit_blk_get_flags(nd_desc, nvdimm, nfit_blk);
+ if (rc < 0) {
+ dev_dbg(dev, "%s: %s failed get DIMM flags\n",
+ __func__, nvdimm_name(nvdimm));
+ return rc;
+ }
+
nfit_flush = nfit_mem->nfit_flush;
if (nfit_flush && nfit_flush->flush->hint_count != 0) {
nfit_blk->nvdimm_flush = devm_ioremap_nocache(dev,
diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h
index 815cb561cdba..79b6d83875c1 100644
--- a/drivers/acpi/nfit.h
+++ b/drivers/acpi/nfit.h
@@ -40,6 +40,10 @@ enum nfit_uuids {
NFIT_UUID_MAX,
};
+enum {
+ ND_BLK_DCR_LATCH = 2,
+};
+
struct nfit_spa {
struct acpi_nfit_system_address *spa;
struct list_head list;
@@ -131,6 +135,7 @@ struct nfit_blk {
u64 stat_offset;
u64 cmd_offset;
void __iomem *nvdimm_flush;
+ u32 dimm_flags;
};
enum spa_map_type {
prev parent reply other threads:[~2015-07-11 14:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 14:40 [PATCH v2 0/6] Correctness fixes for NFIT BLK I/O path Dan Williams
2015-07-11 14:40 ` [PATCH v2 1/6] pmem: add maintainer for include/linux/pmem.h Dan Williams
2015-07-11 14:40 ` [PATCH v2 2/6] tools/testing/nvdimm: mock ioremap_wt Dan Williams
2015-07-11 14:40 ` [PATCH v2 3/6] tools/testing/nvdimm: fix return code for unimplemented commands Dan Williams
2015-07-11 14:40 ` [PATCH v2 4/6] tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test Dan Williams
2015-07-11 14:41 ` [PATCH v2 5/6] nfit: update block I/O path to use PMEM API Dan Williams
2015-07-11 14:41 ` Dan Williams [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150711144109.25013.53374.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@ml01.01.org \
--cc=rafael.j.wysocki@intel.com \
--cc=ross.zwisler@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®