Hi, On Mon, Jul 13, 2015 at 06:05:47PM +0200, Pali Rohár wrote: > now I'm testing 4.2-rc2 release and rtc is working: > > [ 27.426055] omap_i2c 48072000.i2c: controller timed out > [ 28.723358] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. > [ 30.127014] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC > [ 31.373626] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 > > There is still some i2c time out line and some reset detected, but > driver loads fine. > > But problem with touchscreen tsc2005 and wifi wl1251 is still there :-( > Drivers are compiled as external .ko modules. Right, my kernel was with everything built-in. > Plus I see new problem with bq2415_charger :-( Mh did you see them in 4.1? > [ 54.214965] isp1704_charger isp1704: registered with product id isp1707 > [ 54.828674] bq2415x-charger 2-006b: automode enabled > [ 55.192596] ------------[ cut here ]------------ > [ 55.200561] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1443 __queue_delayed_work+0x50/0x144() > ... > [ 55.489501] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1445 __queue_delayed_work+0xb4/0x144() > ... > [ 55.820953] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1376 __queue_work+0x2c0/0x404() > ... > [ 56.243347] bq2415x-charger 2-006b: driver registered So the driver tries to send a notification before it's fully registered. The warnings are probably a side-effect of the power-supply API changes in 4.1. > [ 77.142181] INFO: rcu_preempt detected stalls on CPUs/tasks: { P528} (detected by 0, t=2102 jiffies, g=1101, c=1100, q=3834) > [ 77.163391] kworker/0:3 R running 0 528 2 0x00000000 > [ 77.173706] Workqueue: events power_supply_changed_work > [ 77.183898] [] (__schedule) from [] (preempt_schedule_irq+0x54/0x84) > [ 77.194274] [] (preempt_schedule_irq) from [] (svc_preempt+0x8/0x18) > [ 77.204711] [] (svc_preempt) from [] (queue_delayed_work_on+0x40/0x44) > [ 77.215179] [] (queue_delayed_work_on) from [] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger]) > [ 77.235870] [] (bq2415x_notifier_call [bq2415x_charger]) from [] (notifier_call_chain+0x38/0x68) > [ 77.257019] [] (notifier_call_chain) from [] (__atomic_notifier_call_chain+0x34/0x44) > [ 77.278411] [] (__atomic_notifier_call_chain) from [] (atomic_notifier_call_chain+0x14/0x18) > [ 77.299804] [] (atomic_notifier_call_chain) from [] (power_supply_changed_work+0xac/0x130) > [ 77.321197] [] (power_supply_changed_work) from [] (process_one_work+0x278/0x45c) > [ 77.342529] [] (process_one_work) from [] (worker_thread+0x230/0x354) > [ 77.353393] [] (worker_thread) from [] (kthread+0xcc/0xe0) > [ 77.364074] [] (kthread) from [] (ret_from_fork+0x14/0x2c) > [ 77.374572] kworker/0:3 R running 0 528 2 0x00000000 > [ 77.384948] Workqueue: events power_supply_changed_work > [ 77.395111] [] (__schedule) from [] (preempt_schedule_irq+0x54/0x84) > [ 77.405456] [] (preempt_schedule_irq) from [] (svc_preempt+0x8/0x18) > [ 77.415863] [] (svc_preempt) from [] (queue_delayed_work_on+0x40/0x44) > [ 77.426269] [] (queue_delayed_work_on) from [] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger]) > [ 77.447174] [] (bq2415x_notifier_call [bq2415x_charger]) from [] (notifier_call_chain+0x38/0x68) > [ 77.468322] [] (notifier_call_chain) from [] (__atomic_notifier_call_chain+0x34/0x44) > [ 77.489990] [] (__atomic_notifier_call_chain) from [] (atomic_notifier_call_chain+0x14/0x18) > [ 77.512115] [] (atomic_notifier_call_chain) from [] (power_supply_changed_work+0xac/0x130) > [ 77.534637] [] (power_supply_changed_work) from [] (process_one_work+0x278/0x45c) > [ 77.557189] [] (process_one_work) from [] (worker_thread+0x230/0x354) > [ 77.568634] [] (worker_thread) from [] (kthread+0xcc/0xe0) > [ 77.579925] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Not sure about these. -- Sebastian