Re: [PATCH] ASoC: sgtl5000: fix bad register MIC_BIAS_VOLTAGE setup on probe

[Mark Brown <broonie@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 888 bytes --]

On Fri, Sep 25, 2015 at 04:21:27PM +0200, Gianluca Renzi wrote:

>  	snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
>  			SGTL5000_BIAS_R_MASK,
> -			sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
> +			sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);

That doesn't look right...  I would expect _BIAS_R_SHIFT to shift a
value into the register masked off by _BIAS_R_MASK and therefore that
the above is saying that the definition of one of those two macros is
wrong.  I would not expect something called _BIAS_VOLT_SHIFT here.

What's going on here?

> @@ -1549,7 +1549,7 @@ static int sgtl5000_i2c_probe(struct i2c
>  			else {
>  				sgtl5000->micbias_voltage = 0;
>  				dev_err(&client->dev,
> -					"Unsuitable MicBias resistor\n");
> +					"Unsuitable MicBias voltage\n");
>  			}

This looks like a reasonable but unrelated fix and should be in a
separate patch.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]