From: Lee Jones <lee.jones@linaro.org>
To: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Cc: sameo@linux.intel.com, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6 RESEND] mfd: arizona: use correct type ID for device tree config
Date: Thu, 1 Oct 2015 12:46:13 +0100 [thread overview]
Message-ID: <20151001114613.GQ3214@x1> (raw)
In-Reply-To: <1443444406-30518-7-git-send-email-rf@opensource.wolfsonmicro.com>
On Mon, 28 Sep 2015, Richard Fitzgerald wrote:
> In the case of a device tree config the code uses the device ID
> from the DT entry to check which codec is required but when storing
> the ID into struct arizona it was always using the non-DT SPI device
> table to get an ID.
>
> This patch changes the code to store the correct ID into struct arizona.
>
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/arizona-i2c.c | 5 ++---
> drivers/mfd/arizona-spi.c | 5 ++---
> 2 files changed, 4 insertions(+), 6 deletions(-)
For my own reference:
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
> index 914bdce..4e3afd1 100644
> --- a/drivers/mfd/arizona-i2c.c
> +++ b/drivers/mfd/arizona-i2c.c
> @@ -56,8 +56,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
> regmap_config = &wm8998_i2c_regmap;
> break;
> default:
> - dev_err(&i2c->dev, "Unknown device type %ld\n",
> - id->driver_data);
> + dev_err(&i2c->dev, "Unknown device type %ld\n", type);
> return -EINVAL;
> }
>
> @@ -79,7 +78,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
> return ret;
> }
>
> - arizona->type = id->driver_data;
> + arizona->type = type;
> arizona->dev = &i2c->dev;
> arizona->irq = i2c->irq;
>
> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
> index 850a63a..8cffb1c 100644
> --- a/drivers/mfd/arizona-spi.c
> +++ b/drivers/mfd/arizona-spi.c
> @@ -47,8 +47,7 @@ static int arizona_spi_probe(struct spi_device *spi)
> regmap_config = &wm5110_spi_regmap;
> break;
> default:
> - dev_err(&spi->dev, "Unknown device type %ld\n",
> - id->driver_data);
> + dev_err(&spi->dev, "Unknown device type %ld\n", type);
> return -EINVAL;
> }
>
> @@ -70,7 +69,7 @@ static int arizona_spi_probe(struct spi_device *spi)
> return ret;
> }
>
> - arizona->type = id->driver_data;
> + arizona->type = type;
> arizona->dev = &spi->dev;
> arizona->irq = spi->irq;
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2015-10-01 11:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 12:46 [PATCH 0/6 RESEND] mfd: arizona: Various improvements and refactoring Richard Fitzgerald
2015-09-28 12:46 ` [PATCH 1/6 RESEND] mfd: arizona: factor out DCVDD isolation control Richard Fitzgerald
2015-09-28 12:46 ` [PATCH 2/6 RESEND] mfd: arizona: factor out checking of jack detection state Richard Fitzgerald
2015-09-28 12:46 ` [PATCH 3/6 RESEND] mfd: arizona: Downgrade type mismatch messages to dev_warn Richard Fitzgerald
2015-10-01 11:17 ` Lee Jones
2015-09-28 12:46 ` [PATCH 4/6 RESEND] mfd: arizona: Simplify adding subdevices Richard Fitzgerald
2015-10-01 11:41 ` Lee Jones
2015-09-28 12:46 ` [PATCH 5/6 RESEND] mfd: arizona: Remove use of codec build config #ifdefs Richard Fitzgerald
2015-10-01 11:44 ` Lee Jones
2015-10-02 9:23 ` Charles Keepax
2015-09-28 12:46 ` [PATCH 6/6 RESEND] mfd: arizona: use correct type ID for device tree config Richard Fitzgerald
2015-10-01 11:46 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151001114613.GQ3214@x1 \
--to=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=rf@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome