mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Christian Melki <christian.melki@t2data.com>
Cc: joro@8bytes.org, linux-kernel@vger.kernel.org
Subject: Re: Fwd: SWIOTLB on 32-bit PAE
Date: Wed, 7 Oct 2015 15:45:44 -0400	[thread overview]
Message-ID: <20151007194544.GA24348@l.oracle.com> (raw)
In-Reply-To: <561297D5.8040107@t2data.com>

On Mon, Oct 05, 2015 at 05:31:33PM +0200, Christian Melki wrote:
> Yes. Operator error indeed.
> 
> Thanks for asking. Included is the same patch with the SoB.

I've stuck it at 
https://git.kernel.org/cgit/linux/kernel/git/konrad/swiotlb.git/ #stable/for-linus-4.3

Will send it out tomorrow if there are no #linux-next issues.
> 
> On 10/05/2015 04:21 PM, Konrad Rzeszutek Wilk wrote:
> >On Mon, Oct 05, 2015 at 12:44:55PM +0200, Christian Melki wrote:
> >>Joerg,
> >>
> >>I already sent the patch for Kconfig change to the list.
> >>But I discovered something even more disturbing which I mailed Konrad about.
> >>With the change my machine does not hang any more, but instead corrupts data
> >>which is written. The data however is readable on the machine which
> >>corrupted it, unreadable on the other machine without the patch. I don't
> >>understand what is going on. I have never encountered "selective" file
> >>corruption of fs on different machines. The fs itself checks out cleanly
> >>with badblock control (ext4). I fail to understand what is happening.
> >
> >And I believe this ended up being an operator error?
> >
> >With the patch you sent, you didn't include your SoB
> >(Signed-off-By). I would like to include your patch but I cannot
> >with your SoB. It is matter of reading to Documentation/SubmittingPatches
> >and just consenting to the Certificate in there.
> >
> >If you are uncomfortable with that - that is OK, I can make this
> >patch myself (a one liner :-)) but I figured it owuld be nice
> >for you to have all the credit.
> >>
> >>Regards,
> >>Christian
> >>
> >>-------- Forwarded Message --------
> >>Subject: SWIOTLB on 32-bit PAE
> >>Date: Mon, 5 Oct 2015 10:31:39 +0200
> >>From: Christian Melki <christian.melki@t2data.com>
> >>To: linux-kernel@vger.kernel.org
> >>CC: konrad.wilk@oracle.com
> >>
> >>Hi,
> >>
> >>I discovered that my 32-bit PAE 4.2.0 kernel (no IOMMU code) would hang
> >>when writing to my USB disk. The kernel spews million(-ish messages per
> >>sec) to syslog, effectively "hanging" userspace with my kernel.
> >>
> >>Oct  2 14:33:06 voodoochild kernel: [  223.287447] nommu_map_sg:
> >>overflow 25dcac000+1024 of device mask ffffffff
> >>Oct  2 14:33:06 voodoochild kernel: [  223.287448] nommu_map_sg:
> >>overflow 25dcac000+1024 of device mask ffffffff
> >>Oct  2 14:33:06 voodoochild kernel: [  223.287449] nommu_map_sg:
> >>overflow 25dcac000+1024 of device mask ffffffff
> >>... etc ...
> >>
> >>In my kernel config I noticed that SWIOTLB was not on. It seems SWIOTLB
> >>is provided for 64-bit and 32-bit with IOMMU/AGPGART code. But if I
> >>compiled the kernel with PAE and no IOMMU and no other GART code, I
> >>would not get SWIOTLB. I'd like to think that SWIOTLB should be selected
> >>for 32-bit PAE as default.
> >>
> >>I have attached a oneliner patch which does that.
> >>The patch works for me. The issue where the kernel more or less runs
> >>endless bashing of (nommu_?)map_sg when failing is another problem I
> >>guess. I expected the kernel/drivers to have some more graceful
> >>handling, but I know to little about this area to have a proper opinion.
> >>
> >>Regards,
> >>Christian
> >>
> >>
> >>
> >
> >>diff -urN linux-4.2.orig/arch/x86/Kconfig linux-4.2/arch/x86/Kconfig
> >>--- linux-4.2.orig/arch/x86/Kconfig	2015-10-05 08:56:58.933313678 +0200
> >>+++ linux-4.2/arch/x86/Kconfig	2015-10-05 09:00:00.916306025 +0200
> >>@@ -1282,6 +1282,7 @@
> >>  config X86_PAE
> >>  	bool "PAE (Physical Address Extension) Support"
> >>  	depends on X86_32 && !HIGHMEM4G
> >>+	select SWIOTLB
> >>  	---help---
> >>  	  PAE is required for NX support, and furthermore enables
> >>  	  larger swapspace support for non-overcommit purposes. It
> >>
> >
> 

> diff -urN linux-4.2.orig/arch/x86/Kconfig linux-4.2/arch/x86/Kconfig
> --- linux-4.2.orig/arch/x86/Kconfig	2015-10-05 08:56:58.933313678 +0200
> +++ linux-4.2/arch/x86/Kconfig	2015-10-05 09:00:00.916306025 +0200
> @@ -1282,6 +1282,7 @@
>  config X86_PAE
>  	bool "PAE (Physical Address Extension) Support"
>  	depends on X86_32 && !HIGHMEM4G
> +	select SWIOTLB
>  	---help---
>  	  PAE is required for NX support, and furthermore enables
>  	  larger swapspace support for non-overcommit purposes. It
> 
> Signed-off-by: Christian Melki <christian.melki@t2data.com>


      reply	other threads:[~2015-10-07 19:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-05  8:31 Christian Melki
     [not found] ` <561254A7.4000805@t2data.com>
2015-10-05 14:21   ` Fwd: " Konrad Rzeszutek Wilk
2015-10-05 15:31     ` Christian Melki
2015-10-07 19:45       ` Konrad Rzeszutek Wilk [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151007194544.GA24348@l.oracle.com \
    --to=konrad.wilk@oracle.com \
    --cc=christian.melki@t2data.com \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome