From: kbuild test robot <lkp@intel.com>
To: igal.liberman@freescale.com
Cc: kbuild-all@01.org, netdev@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
scottwood@freescale.com, madalin.bucur@freescale.com,
pebolle@tiscali.nl, joakim.tjernlund@transmode.se,
ppc@mindchasers.com, stephen@networkplumber.org,
davem@davemloft.net, Igal Liberman <igal.liberman@freescale.com>
Subject: Re: [v6, 3/6] fsl/fman: Add FMan MAC support
Date: Thu, 29 Oct 2015 17:09:32 +0800 [thread overview]
Message-ID: <201510291757.Jgve5XVg%fengguang.wu@intel.com> (raw)
In-Reply-To: <1446022429-31621-4-git-send-email-igal.liberman@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 3894 bytes --]
Hi Igal,
[auto build test ERROR on net/master -- if it's inappropriate base, please suggest rules for selecting the more suitable base]
url: https://github.com/0day-ci/linux/commits/igal-liberman-freescale-com/Freescale-DPAA-FMan/20151028-205843
config: arm-allmodconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
drivers/net/ethernet/freescale/fman/fman_dtsec.c: In function 'dtsec_isr':
>> drivers/net/ethernet/freescale/fman/fman_dtsec.c:872:4: error: implicit declaration of function 'in_be32' [-Werror=implicit-function-declaration]
tpkt1 = in_be32(®s->tpkt);
^
>> drivers/net/ethernet/freescale/fman/fman_dtsec.c:913:5: error: implicit declaration of function 'out_be32' [-Werror=implicit-function-declaration]
out_be32(®s->rctrl,
^
cc1: some warnings being treated as errors
--
drivers/net/ethernet/freescale/fman/fman_memac.c: In function 'memac_init':
>> drivers/net/ethernet/freescale/fman/fman_memac.c:1189:3: error: implicit declaration of function 'in_be32' [-Werror=implicit-function-declaration]
reg32 = in_be32(&memac->regs->command_config);
^
>> drivers/net/ethernet/freescale/fman/fman_memac.c:1191:3: error: implicit declaration of function 'out_be32' [-Werror=implicit-function-declaration]
out_be32(&memac->regs->command_config, reg32);
^
cc1: some warnings being treated as errors
vim +/in_be32 +872 drivers/net/ethernet/freescale/fman/fman_dtsec.c
866 if (dtsec->fm_rev_info.major == 2) {
867 u32 tpkt1, tmp_reg1, tpkt2, tmp_reg2, i;
868 /* a. Write 0x00E0_0C00 to DTSEC_ID
869 * This is a read only register
870 * b. Read and save the value of TPKT
871 */
> 872 tpkt1 = in_be32(®s->tpkt);
873
874 /* c. Read the register at dTSEC address offset 0x32C */
875 tmp_reg1 = in_be32(®s->reserved02c0[27]);
876
877 /* d. Compare bits [9:15] to bits [25:31] of the
878 * register at address offset 0x32C.
879 */
880 if ((tmp_reg1 & 0x007F0000) !=
881 (tmp_reg1 & 0x0000007F)) {
882 /* If they are not equal, save the value of
883 * this register and wait for at least
884 * MAXFRM*16 ns
885 */
886 usleep_range((u32)(min
887 (dtsec_get_max_frame_length(dtsec) *
888 16 / 1000, 1)), (u32)
889 (min(dtsec_get_max_frame_length
890 (dtsec) * 16 / 1000, 1) + 1));
891 }
892
893 /* e. Read and save TPKT again and read the register
894 * at dTSEC address offset 0x32C again
895 */
896 tpkt2 = in_be32(®s->tpkt);
897 tmp_reg2 = in_be32(®s->reserved02c0[27]);
898
899 /* f. Compare the value of TPKT saved in step b to
900 * value read in step e. Also compare bits [9:15] of
901 * the register at offset 0x32C saved in step d to the
902 * value of bits [9:15] saved in step e. If the two
903 * registers values are unchanged, then the transmit
904 * portion of the dTSEC controller is locked up and
905 * the user should proceed to the recover sequence.
906 */
907 if ((tpkt1 == tpkt2) && ((tmp_reg1 & 0x007F0000) ==
908 (tmp_reg2 & 0x007F0000))) {
909 /* recover sequence */
910
911 /* a.Write a 1 to RCTRL[GRS] */
912
> 913 out_be32(®s->rctrl,
914 in_be32(®s->rctrl) | RCTRL_GRS);
915
916 /* b.Wait until IEVENT[GRSC]=1, or at least
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 53727 bytes --]
next prev parent reply other threads:[~2015-10-29 9:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 8:53 [v6, 0/6] Freescale DPAA FMan igal.liberman
2015-10-28 8:53 ` [v6, 1/6] fsl/fman: Add FMan MURAM support igal.liberman
2015-10-28 8:53 ` [v6, 2/6] fsl/fman: Add FMan support igal.liberman
2015-10-29 8:29 ` kbuild test robot
2015-10-28 8:53 ` [v6, 3/6] fsl/fman: Add FMan MAC support igal.liberman
2015-10-29 9:09 ` kbuild test robot [this message]
2015-10-28 8:53 ` [v6, 4/6] fsl/fman: Add FMan SP support igal.liberman
2015-10-28 8:53 ` [v6, 5/6] fsl/fman: Add FMan Port Support igal.liberman
2015-10-29 9:49 ` kbuild test robot
2015-10-28 8:53 ` [v6, 6/6] fsl/fman: Add FMan MAC driver igal.liberman
2015-10-29 10:21 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201510291757.Jgve5XVg%fengguang.wu@intel.com \
--to=lkp@intel.com \
--cc=davem@davemloft.net \
--cc=igal.liberman@freescale.com \
--cc=joakim.tjernlund@transmode.se \
--cc=kbuild-all@01.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@freescale.com \
--cc=netdev@vger.kernel.org \
--cc=pebolle@tiscali.nl \
--cc=ppc@mindchasers.com \
--cc=scottwood@freescale.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®