From: Dave Hansen <dave@sr71.net>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, Dave Hansen <dave@sr71.net>, dave.hansen@linux.intel.com
Subject: [PATCH 13/37] x86, pkeys: store protection in high VMA flags
Date: Mon, 16 Nov 2015 19:35:28 -0800 [thread overview]
Message-ID: <20151117033528.0B5A416A@viggo.jf.intel.com> (raw)
In-Reply-To: <20151117033511.BFFA1440@viggo.jf.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
vma->vm_flags is an 'unsigned long', so has space for 32 flags
on 32-bit architectures. The high 32 bits are unused on 64-bit
platforms. We've steered away from using the unused high VMA
bits for things because we would have difficulty supporting it
on 32-bit.
Protection Keys are not available in 32-bit mode, so there is
no concern about supporting this feature in 32-bit mode or on
32-bit CPUs.
This patch carves out 4 bits from the high half of
vma->vm_flags and allows architectures to set config option
to make them available.
Sparse complains about these constants unless we explicitly
call them "UL".
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---
b/arch/x86/Kconfig | 1 +
b/include/linux/mm.h | 7 +++++++
b/mm/Kconfig | 3 +++
3 files changed, 11 insertions(+)
diff -puN arch/x86/Kconfig~pkeys-07-eat-high-vma-flags arch/x86/Kconfig
--- a/arch/x86/Kconfig~pkeys-07-eat-high-vma-flags 2015-11-16 12:35:40.938426022 -0800
+++ b/arch/x86/Kconfig 2015-11-16 12:35:40.945426340 -0800
@@ -152,6 +152,7 @@ config X86
select VIRT_TO_BUS
select X86_DEV_DMA_OPS if X86_64
select X86_FEATURE_NAMES if PROC_FS
+ select ARCH_USES_HIGH_VMA_FLAGS if X86_INTEL_MEMORY_PROTECTION_KEYS
config INSTRUCTION_DECODER
def_bool y
diff -puN include/linux/mm.h~pkeys-07-eat-high-vma-flags include/linux/mm.h
--- a/include/linux/mm.h~pkeys-07-eat-high-vma-flags 2015-11-16 12:35:40.940426113 -0800
+++ b/include/linux/mm.h 2015-11-16 12:35:40.946426385 -0800
@@ -158,6 +158,13 @@ extern unsigned int kobjsize(const void
#define VM_NOHUGEPAGE 0x40000000 /* MADV_NOHUGEPAGE marked this vma */
#define VM_MERGEABLE 0x80000000 /* KSM may merge identical pages */
+#ifdef CONFIG_ARCH_USES_HIGH_VMA_FLAGS
+#define VM_HIGH_ARCH_0 0x100000000UL /* bit only usable on 64-bit architectures */
+#define VM_HIGH_ARCH_1 0x200000000UL /* bit only usable on 64-bit architectures */
+#define VM_HIGH_ARCH_2 0x400000000UL /* bit only usable on 64-bit architectures */
+#define VM_HIGH_ARCH_3 0x800000000UL /* bit only usable on 64-bit architectures */
+#endif /* CONFIG_ARCH_USES_HIGH_VMA_FLAGS */
+
#if defined(CONFIG_X86)
# define VM_PAT VM_ARCH_1 /* PAT reserves whole VMA at once (x86) */
#elif defined(CONFIG_PPC)
diff -puN mm/Kconfig~pkeys-07-eat-high-vma-flags mm/Kconfig
--- a/mm/Kconfig~pkeys-07-eat-high-vma-flags 2015-11-16 12:35:40.942426204 -0800
+++ b/mm/Kconfig 2015-11-16 12:35:40.947426431 -0800
@@ -668,3 +668,6 @@ config ZONE_DEVICE
config FRAME_VECTOR
bool
+
+config ARCH_USES_HIGH_VMA_FLAGS
+ bool
_
next prev parent reply other threads:[~2015-11-17 3:42 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:35 [PATCH 00/37] x86: Memory Protection Keys Dave Hansen
2015-11-17 3:35 ` [PATCH 01/37] uprobes: dont pass around current->mm Dave Hansen
2015-11-17 3:35 ` [PATCH 02/37] mm, frame_vector: do not use get_user_pages_locked() Dave Hansen
2015-11-18 12:29 ` Jan Kara
2015-11-18 17:04 ` Andrea Arcangeli
2015-11-17 3:35 ` [PATCH 03/37] mm: kill get_user_pages_locked() Dave Hansen
2015-11-17 3:35 ` [PATCH 04/37] mm: simplify __get_user_pages() Dave Hansen
2015-11-17 3:35 ` [PATCH 05/37] mm, gup: introduce concept of "foreign" get_user_pages() Dave Hansen
2015-11-17 3:35 ` [PATCH 06/37] x86, fpu: add placeholder for Processor Trace XSAVE state Dave Hansen
2015-11-17 3:35 ` [PATCH 07/37] x86, pkeys: Add Kconfig option Dave Hansen
2015-11-17 3:35 ` [PATCH 08/37] x86, pkeys: cpuid bit definition Dave Hansen
2015-11-17 3:35 ` [PATCH 09/37] x86, pkeys: define new CR4 bit Dave Hansen
2015-11-17 3:35 ` [PATCH 10/37] x86, pkeys: add PKRU xsave fields and data structure(s) Dave Hansen
2015-11-27 9:23 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 11/37] x86, pkeys: PTE bits for storing protection key Dave Hansen
2015-11-17 3:35 ` [PATCH 12/37] x86, pkeys: new page fault error code bit: PF_PK Dave Hansen
2015-11-17 3:35 ` Dave Hansen [this message]
2015-11-17 3:35 ` [PATCH 14/37] x86, pkeys: arch-specific protection bits Dave Hansen
2015-11-17 3:35 ` [PATCH 15/37] x86, pkeys: pass VMA down in to fault signal generation code Dave Hansen
2015-11-27 9:30 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 16/37] x86, pkeys: notify userspace about protection key faults Dave Hansen
2015-11-27 9:49 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 17/37] x86, pkeys: add functions to fetch PKRU Dave Hansen
2015-11-27 9:51 ` Thomas Gleixner
2015-11-30 15:51 ` Dave Hansen
2015-11-17 3:35 ` [PATCH 18/37] mm: factor out VMA fault permission checking Dave Hansen
2015-11-27 9:53 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 19/37] x86, mm: simplify get_user_pages() PTE bit handling Dave Hansen
2015-11-27 10:12 ` Thomas Gleixner
2015-11-30 16:25 ` Dave Hansen
2015-11-17 3:35 ` [PATCH 20/37] x86, pkeys: check VMAs and PTEs for protection keys Dave Hansen
2015-11-17 3:35 ` [PATCH 21/37] mm: add gup flag to indicate "foreign" mm access Dave Hansen
2015-11-17 3:35 ` [PATCH 22/37] x86, pkeys: optimize fault handling in access_error() Dave Hansen
2015-11-17 3:35 ` [PATCH 23/37] x86, pkeys: differentiate instruction fetches Dave Hansen
2015-11-17 3:35 ` [PATCH 24/37] x86, pkeys: dump PKRU with other kernel registers Dave Hansen
2015-11-17 3:35 ` [PATCH 25/37] x86, pkeys: dump PTE pkey in /proc/pid/smaps Dave Hansen
2015-11-17 3:35 ` [PATCH 26/37] x86, pkeys: add Kconfig prompt to existing config option Dave Hansen
2015-11-17 3:35 ` [PATCH 27/37] mm, multi-arch: pass a protection key in to calc_vm_flag_bits() Dave Hansen
2015-11-17 3:35 ` [PATCH 28/37] x86, pkeys: add arch_validate_pkey() Dave Hansen
2015-11-17 3:35 ` [PATCH 29/37] mm: implement new mprotect_key() system call Dave Hansen
2015-11-17 3:35 ` [PATCH 30/37] x86, pkeys: make mprotect_key() mask off additional vm_flags Dave Hansen
2015-11-17 3:35 ` [PATCH 31/37] x86: wire up mprotect_key() system call Dave Hansen
2015-11-17 3:35 ` [PATCH 32/37] x86: separate out LDT init from context init Dave Hansen
2015-11-17 3:35 ` [PATCH 33/37] x86, fpu: allow setting of XSAVE state Dave Hansen
2015-11-17 3:35 ` [PATCH 34/37] x86, pkeys: allocation/free syscalls Dave Hansen
2015-11-17 3:36 ` [PATCH 35/37] x86, pkeys: add pkey set/get syscalls Dave Hansen
2015-11-17 3:36 ` [PATCH 36/37] x86, pkeys: actually enable Memory Protection Keys in CPU Dave Hansen
2015-11-17 3:36 ` [PATCH 37/37] x86, pkeys: Documentation Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151117033528.0B5A416A@viggo.jf.intel.com \
--to=dave@sr71.net \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®