From: Boqun Feng <boqun.feng@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>,
linux-sparse@vger.kernel.org, linux-kernel@vger.kernel.org,
Christopher Li <sparse@chrisli.org>,
"Paul E . McKenney" <paulmck@linux.vnet.ibm.com>,
Josh Triplett <josh@joshtriplett.org>,
Steven Rostedt <rostedt@goodmis.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Lai Jiangshan <jiangshanlai@gmail.com>,
Andy Whitcroft <apw@canonical.com>, Joe Perches <joe@perches.com>,
Jiang Liu <jiang.liu@linux.intel.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Russell King <rmk+kernel@arm.linux.org.uk>,
Brian Norris <computersforpeace@gmail.com>
Subject: Re: [RFC 3/3] irq: Privatize irq_common_data::state_use_accessors
Date: Mon, 14 Dec 2015 20:00:35 +0800 [thread overview]
Message-ID: <20151214120021.GJ1072@fixme-laptop.cn.ibm.com> (raw)
In-Reply-To: <alpine.DEB.2.11.1512141102470.4336@nanos>
On Mon, Dec 14, 2015 at 11:03:03AM +0100, Thomas Gleixner wrote:
> On Mon, 14 Dec 2015, Peter Zijlstra wrote:
> > On Sat, Dec 12, 2015 at 10:56:02AM +0800, Boqun Feng wrote:
> > > According to Peter Zijlstra, irq_common_data::state_use_accessors is not
> > > designed for public use. Therefore make it private so that people who
> > > write code accessing it directly will get blamed by sparse.
> > >
> > > Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> > > ---
> > > include/linux/irq.h | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/include/linux/irq.h b/include/linux/irq.h
> > > index 3c1c967..0b8f273 100644
> > > --- a/include/linux/irq.h
> > > +++ b/include/linux/irq.h
> > > @@ -137,7 +137,7 @@ struct irq_domain;
> > > * @msi_desc: MSI descriptor
> > > */
> > > struct irq_common_data {
> > > - unsigned int state_use_accessors;
> > > + unsigned int __private state_use_accessors;
> > > #ifdef CONFIG_NUMA
> > > unsigned int node;
> > > #endif
> > > @@ -208,7 +208,7 @@ enum {
> > > IRQD_FORWARDED_TO_VCPU = (1 << 20),
> > > };
> > >
> > > -#define __irqd_to_state(d) ((d)->common->state_use_accessors)
> > > +#define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
> > >
> > > static inline bool irqd_is_setaffinity_pending(struct irq_data *d)
> > > {
> >
> > We should probably #undef that one once we're done with it.. Thomas?
>
> Probably.
>
Probably something like this(untested, only run "make kernel/irq/")?
Subject: [RFC v2 3/3] irq: Privatize irq_common_data::state_use_accessors
According to Peter Zijlstra, irq_common_data::state_use_accessors is not
designed for public use. Therefore make it private so that people who
write code accessing it directly will get blamed by sparse.
Also macro __irqd_to_state() is for _designed_ accesses to irq_data's
state only, it's better to limit its scope, therefore put all its
callers together and #undef it after use.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
---
v1-->v2:
* move all callers of __irqd_to_state() together so that we can
#undef it after use.
include/linux/irq.h | 35 +++++++++++++++++++++++++++++++++--
kernel/irq/internals.h | 28 ----------------------------
2 files changed, 33 insertions(+), 30 deletions(-)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 3c1c967..9b20df6 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -137,7 +137,7 @@ struct irq_domain;
* @msi_desc: MSI descriptor
*/
struct irq_common_data {
- unsigned int state_use_accessors;
+ unsigned int __private state_use_accessors;
#ifdef CONFIG_NUMA
unsigned int node;
#endif
@@ -208,7 +208,11 @@ enum {
IRQD_FORWARDED_TO_VCPU = (1 << 20),
};
-#define __irqd_to_state(d) ((d)->common->state_use_accessors)
+#define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
+
+/*
+ * Manipulation functions for irq_data's state
+ */
static inline bool irqd_is_setaffinity_pending(struct irq_data *d)
{
@@ -299,6 +303,33 @@ static inline void irqd_clr_forwarded_to_vcpu(struct irq_data *d)
__irqd_to_state(d) &= ~IRQD_FORWARDED_TO_VCPU;
}
+static inline void irqd_set_move_pending(struct irq_data *d)
+{
+ __irqd_to_state(d) |= IRQD_SETAFFINITY_PENDING;
+}
+
+static inline void irqd_clr_move_pending(struct irq_data *d)
+{
+ __irqd_to_state(d) &= ~IRQD_SETAFFINITY_PENDING;
+}
+
+static inline void irqd_clear(struct irq_data *d, unsigned int mask)
+{
+ __irqd_to_state(d) &= ~mask;
+}
+
+static inline void irqd_set(struct irq_data *d, unsigned int mask)
+{
+ __irqd_to_state(d) |= mask;
+}
+
+static inline bool irqd_has_set(struct irq_data *d, unsigned int mask)
+{
+ return __irqd_to_state(d) & mask;
+}
+
+#undef __irqd_to_state
+
static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
{
return d->hwirq;
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index fcab63c..307fff8 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -160,34 +160,6 @@ irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags)
__irq_put_desc_unlock(desc, flags, false);
}
-/*
- * Manipulation functions for irq_data.state
- */
-static inline void irqd_set_move_pending(struct irq_data *d)
-{
- __irqd_to_state(d) |= IRQD_SETAFFINITY_PENDING;
-}
-
-static inline void irqd_clr_move_pending(struct irq_data *d)
-{
- __irqd_to_state(d) &= ~IRQD_SETAFFINITY_PENDING;
-}
-
-static inline void irqd_clear(struct irq_data *d, unsigned int mask)
-{
- __irqd_to_state(d) &= ~mask;
-}
-
-static inline void irqd_set(struct irq_data *d, unsigned int mask)
-{
- __irqd_to_state(d) |= mask;
-}
-
-static inline bool irqd_has_set(struct irq_data *d, unsigned int mask)
-{
- return __irqd_to_state(d) & mask;
-}
-
static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
{
__this_cpu_inc(*desc->kstat_irqs);
--
2.6.4
next prev parent reply other threads:[~2015-12-14 12:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-12 2:55 [RFC 0/3] sparse: Introduce __private to privatize members of structs Boqun Feng
2015-12-12 2:56 ` [RFC 1/3] sparse: Add " Boqun Feng
2015-12-12 2:56 ` [RFC 2/3] RCU: Privatize rcu_node::lock Boqun Feng
2015-12-12 2:56 ` [RFC 3/3] irq: Privatize irq_common_data::state_use_accessors Boqun Feng
2015-12-14 9:50 ` Peter Zijlstra
2015-12-14 10:03 ` Thomas Gleixner
2015-12-14 12:00 ` Boqun Feng [this message]
2015-12-14 15:59 ` Thomas Gleixner
2015-12-15 0:56 ` Boqun Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151214120021.GJ1072@fixme-laptop.cn.ibm.com \
--to=boqun.feng@gmail.com \
--cc=apw@canonical.com \
--cc=computersforpeace@gmail.com \
--cc=jiang.liu@linux.intel.com \
--cc=jiangshanlai@gmail.com \
--cc=joe@perches.com \
--cc=josh@joshtriplett.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sparse@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mathieu.desnoyers@efficios.com \
--cc=mika.westerberg@linux.intel.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=rostedt@goodmis.org \
--cc=sparse@chrisli.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®