Hi, On Wed, Mar 16, 2016 at 09:50:40PM +0200, Ivaylo Dimitrov wrote: > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.947998] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.960632] tpa6130a2 2-0060: Write failed > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.965026] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-rc5+ #26 > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.972106] Hardware name: Nokia RX-51 board > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.976684] Workqueue: deferwq deferred_probe_work_func > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.982299] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.990570] [] (show_stack) from [] (tpa6130a2_i2c_write+0x58/0x90) > Jan 1 06:01:43 Nokia-N900 kernel: [ 6.999114] [] (tpa6130a2_i2c_write) from [] (tpa6130a2_power+0xac/0x1c4) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.008239] [] (tpa6130a2_power) from [] (tpa6130a2_probe+0x144/0x234) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.017059] [] (tpa6130a2_probe) from [] (i2c_device_probe+0x170/0x1b8) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.025939] [] (i2c_device_probe) from [] (driver_probe_device+0x120/0x2b0) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.035247] [] (driver_probe_device) from [] (bus_for_each_drv+0x48/0x8c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.044311] [] (bus_for_each_drv) from [] (__device_attach+0x88/0xf8) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.053009] [] (__device_attach) from [] (bus_probe_device+0x28/0x80) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.061737] [] (bus_probe_device) from [] (device_add+0x3c0/0x55c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.070159] [] (device_add) from [] (i2c_new_device+0xf8/0x198) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.078308] [] (i2c_new_device) from [] (i2c_register_adapter+0x2d0/0x47c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.087432] [] (i2c_register_adapter) from [] (omap_i2c_probe+0x54c/0x64c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.096618] [] (omap_i2c_probe) from [] (platform_drv_probe+0x58/0xa0) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.105438] [] (platform_drv_probe) from [] (driver_probe_device+0x120/0x2b0) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.114929] [] (driver_probe_device) from [] (bus_for_each_drv+0x48/0x8c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.123962] [] (bus_for_each_drv) from [] (__device_attach+0x88/0xf8) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.132659] [] (__device_attach) from [] (bus_probe_device+0x28/0x80) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.141357] [] (bus_probe_device) from [] (deferred_probe_work_func+0x58/0x84) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.150939] [] (deferred_probe_work_func) from [] (process_one_work+0x1c4/0x324) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.160705] [] (process_one_work) from [] (worker_thread+0x314/0x4a8) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.169433] [] (worker_thread) from [] (kthread+0xcc/0xe0) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.177154] [] (kthread) from [] (ret_from_fork+0x14/0x3c) > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.184783] tpa6130a2 2-0060: Failed to initialize chip > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.190551] tpa6130a2: probe of 2-0060 failed with error -121 > Jan 1 06:01:43 Nokia-N900 kernel: [ 7.197174] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz > > now, the only thing I can think of remaining to test is the reset gpio set-up - > I wonder if it is possible to be set in safe mode(or input, or... ?), so the > reset is never deasserted. mh both, the power gpio is turned off in tpa6130a2_power(0). I guess if you don't see the problem during probe() everything works? I have another idea though: In opposit to the gpio, the regulator may also be referenced by something else/already enabled. I guess adding a sleep after the regulator_enable() is worth a try. Also I wonder if the same happens, if you avoid having the module available during boot and instead load it once everything has settled. That would rule out any side-effects of other modules being probed on the same i2c bus. -- Sebastian