From: Daeseok Youn <daeseok.youn@gmail.com>
To: lidza.louina@gmail.com
Cc: markh@compro.net, gregkh@linuxfoundation.org,
driverdev-devel@linuxdriverproject.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [PATCH 1/2] staging: dgnc: fix CamelCase in dgnc_drvier.h and
Date: Thu, 24 Mar 2016 15:10:43 +0900 [thread overview]
Message-ID: <20160324061043.GA11766@SEL-JYOUN-D1> (raw)
fix checkpatch.pl warning about CamelCase
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
---
drivers/staging/dgnc/dgnc_driver.h | 12 ++++++------
drivers/staging/dgnc/dgnc_tty.c | 32 ++++++++++++++++----------------
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
index f3d00df..3d8e15f 100644
--- a/drivers/staging/dgnc/dgnc_driver.h
+++ b/drivers/staging/dgnc/dgnc_driver.h
@@ -203,15 +203,15 @@ struct dgnc_board {
*/
struct tty_driver serial_driver;
- char SerialName[200];
+ char serial_name[200];
struct tty_driver print_driver;
- char PrintName[200];
+ char print_name[200];
- bool dgnc_Major_Serial_Registered;
- bool dgnc_Major_TransparentPrint_Registered;
+ bool dgnc_major_serial_registered;
+ bool dgnc_major_transparent_print_registered;
- uint dgnc_Serial_Major;
- uint dgnc_TransparentPrint_Major;
+ uint dgnc_serial_major;
+ uint dgnc_transparent_print_major;
uint TtyRefCnt;
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index 081ac75..98b88d1 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -180,9 +180,9 @@ int dgnc_tty_register(struct dgnc_board *brd)
brd->serial_driver.magic = TTY_DRIVER_MAGIC;
- snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgnc_%d_", brd->boardnum);
+ snprintf(brd->serial_name, MAXTTYNAMELEN, "tty_dgnc_%d_", brd->boardnum);
- brd->serial_driver.name = brd->SerialName;
+ brd->serial_driver.name = brd->serial_name;
brd->serial_driver.name_base = 0;
brd->serial_driver.major = 0;
brd->serial_driver.minor_start = 0;
@@ -218,7 +218,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
*/
tty_set_operations(&brd->serial_driver, &dgnc_tty_ops);
- if (!brd->dgnc_Major_Serial_Registered) {
+ if (!brd->dgnc_major_serial_registered) {
/* Register tty devices */
rc = tty_register_driver(&brd->serial_driver);
if (rc < 0) {
@@ -226,7 +226,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
"Can't register tty device (%d)\n", rc);
return rc;
}
- brd->dgnc_Major_Serial_Registered = true;
+ brd->dgnc_major_serial_registered = true;
}
/*
@@ -235,9 +235,9 @@ int dgnc_tty_register(struct dgnc_board *brd)
* we are when we get into the dgnc_tty_open() routine.
*/
brd->print_driver.magic = TTY_DRIVER_MAGIC;
- snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
+ snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
- brd->print_driver.name = brd->PrintName;
+ brd->print_driver.name = brd->print_name;
brd->print_driver.name_base = 0;
brd->print_driver.major = brd->serial_driver.major;
brd->print_driver.minor_start = 0x80;
@@ -273,7 +273,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
*/
tty_set_operations(&brd->print_driver, &dgnc_tty_ops);
- if (!brd->dgnc_Major_TransparentPrint_Registered) {
+ if (!brd->dgnc_major_transparent_print_registered) {
/* Register Transparent Print devices */
rc = tty_register_driver(&brd->print_driver);
if (rc < 0) {
@@ -282,12 +282,12 @@ int dgnc_tty_register(struct dgnc_board *brd)
rc);
return rc;
}
- brd->dgnc_Major_TransparentPrint_Registered = true;
+ brd->dgnc_major_transparent_print_registered = true;
}
dgnc_BoardsByMajor[brd->serial_driver.major] = brd;
- brd->dgnc_Serial_Major = brd->serial_driver.major;
- brd->dgnc_TransparentPrint_Major = brd->print_driver.major;
+ brd->dgnc_serial_major = brd->serial_driver.major;
+ brd->dgnc_transparent_print_major = brd->print_driver.major;
return rc;
}
@@ -407,9 +407,9 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
{
int i = 0;
- if (brd->dgnc_Major_Serial_Registered) {
+ if (brd->dgnc_major_serial_registered) {
dgnc_BoardsByMajor[brd->serial_driver.major] = NULL;
- brd->dgnc_Serial_Major = 0;
+ brd->dgnc_serial_major = 0;
for (i = 0; i < brd->nasync; i++) {
if (brd->channels[i])
dgnc_remove_tty_sysfs(brd->channels[i]->
@@ -417,12 +417,12 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
tty_unregister_device(&brd->serial_driver, i);
}
tty_unregister_driver(&brd->serial_driver);
- brd->dgnc_Major_Serial_Registered = false;
+ brd->dgnc_major_serial_registered = false;
}
- if (brd->dgnc_Major_TransparentPrint_Registered) {
+ if (brd->dgnc_major_transparent_print_registered) {
dgnc_BoardsByMajor[brd->print_driver.major] = NULL;
- brd->dgnc_TransparentPrint_Major = 0;
+ brd->dgnc_transparent_print_major = 0;
for (i = 0; i < brd->nasync; i++) {
if (brd->channels[i])
dgnc_remove_tty_sysfs(brd->channels[i]->
@@ -430,7 +430,7 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
tty_unregister_device(&brd->print_driver, i);
}
tty_unregister_driver(&brd->print_driver);
- brd->dgnc_Major_TransparentPrint_Registered = false;
+ brd->dgnc_major_transparent_print_registered = false;
}
kfree(brd->serial_driver.ttys);
--
1.9.1
reply other threads:[~2016-03-24 6:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160324061043.GA11766@SEL-JYOUN-D1 \
--to=daeseok.youn@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=lidza.louina@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®