mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel@savoirfairelinux.com,
	"David S. Miller" <davem@davemloft.net>,
	Patrick Uiterwijk <patrick@puiterwijk.org>,
	Guenter Roeck <linux@roeck-us.net>
Subject: Re: [PATCH net-next 4/7] net: dsa: mv88e6xxx: fix ATU FID access for 6185
Date: Sun, 27 Mar 2016 05:04:34 +0200	[thread overview]
Message-ID: <20160327030434.GB15402@lunn.ch> (raw)
In-Reply-To: <1459043983-12088-5-git-send-email-vivien.didelot@savoirfairelinux.com>

On Sat, Mar 26, 2016 at 09:59:40PM -0400, Vivien Didelot wrote:
> The 6185 family does not have a ATU FID register. It splits it in the
> ATU Control register and the ATU Operation.

Looking at the reference code, the following devices have a FID
register:
( DEV_88E6097_FAMILY | DEV_88E6165_FAMILY | DEV_88E6351_FAMILY | 
  DEV_88E6352_FAMILY)

If there are 256 databases, it gets split across the two registers.

If there are only 64, it all goes in the ATU operation.

   Andrew

> 
> Add 6185 support for FID (a.k.a. DBNum) in ATU commands.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
> ---
>  drivers/net/dsa/mv88e6xxx.c | 14 ++++++++++++++
>  drivers/net/dsa/mv88e6xxx.h |  2 +-
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
> index df3f219..4b3c466 100644
> --- a/drivers/net/dsa/mv88e6xxx.c
> +++ b/drivers/net/dsa/mv88e6xxx.c
> @@ -961,6 +961,20 @@ static int _mv88e6xxx_atu_cmd(struct dsa_switch *ds, u16 fid, u16 cmd)
>  		ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID, fid);
>  		if (ret < 0)
>  			return ret;
> +	} else if (mv88e6xxx_6185_family(ds)) {
> +		/* ATU DBNum[7:4] are located in ATU Control 15:12 */
> +		ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_ATU_CONTROL);
> +		if (ret < 0)
> +			return ret;
> +
> +		ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_CONTROL,
> +					   (ret & 0xfff) |
> +					   ((fid << 8) & 0xf000));
> +		if (ret < 0)
> +			return ret;
> +
> +		/* ATU DBNum[3:0] are located in ATU Operation 3:0 */
> +		cmd |= fid & 0xf;
>  	} else {
>  		return -EOPNOTSUPP;
>  	}
> diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
> index febab76..94d3cb3 100644
> --- a/drivers/net/dsa/mv88e6xxx.h
> +++ b/drivers/net/dsa/mv88e6xxx.h
> @@ -366,7 +366,7 @@ struct mv88e6xxx_switch_id {
>  };
>  
>  struct mv88e6xxx_atu_entry {
> -	u16	fid;
> +	u16	fid; /* 8-bit DBNum in 88E6185 family */
>  	u8	state;
>  	bool	trunk;
>  	u16	portv_trunkid;
> -- 
> 2.7.4
> 

  reply	other threads:[~2016-03-27  3:04 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-27  1:59 [PATCH net-next 0/7] net: dsa: mv88e6xxx: HW bridging support " Vivien Didelot
2016-03-27  1:59 ` [PATCH net-next 1/7] net: dsa: mv88e6xxx: 6185 port default FID is 8-bit Vivien Didelot
2016-03-27  1:59 ` [PATCH net-next 2/7] net: dsa: mv88e6xxx: 6185 has only 256 FDBs Vivien Didelot
2016-03-27  2:52   ` Andrew Lunn
2016-03-27  1:59 ` [PATCH net-next 3/7] net: dsa: mv88e6xxx: write FID in ATU command Vivien Didelot
2016-03-27  1:59 ` [PATCH net-next 4/7] net: dsa: mv88e6xxx: fix ATU FID access for 6185 Vivien Didelot
2016-03-27  3:04   ` Andrew Lunn [this message]
2016-03-27  1:59 ` [PATCH net-next 5/7] net: dsa: mv88e6xxx: fix VTU " Vivien Didelot
2016-03-27  1:59 ` [PATCH net-next 6/7] net: dsa: mv88e6xxx: map destination addresses " Vivien Didelot
2016-03-27  1:59 ` [PATCH net-next 7/7] net: dsa: mv88e6131: enable hardware bridging Vivien Didelot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160327030434.GB15402@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=kernel@savoirfairelinux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=netdev@vger.kernel.org \
    --cc=patrick@puiterwijk.org \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®