From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751211AbcEDNq0 (ORCPT ); Wed, 4 May 2016 09:46:26 -0400 Received: from mail.kernel.org ([198.145.29.136]:48554 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750735AbcEDNqZ (ORCPT ); Wed, 4 May 2016 09:46:25 -0400 Date: Wed, 4 May 2016 08:46:18 -0500 From: Rob Herring To: Caesar Wang Cc: edubezval@gmail.com, Zhang Rui , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Jiri Kosina , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] thermal: trivial: fix the typo Message-ID: <20160504134618.GA3079@rob-hp-laptop> References: <1462277262-29935-1-git-send-email-wxt@rock-chips.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1462277262-29935-1-git-send-email-wxt@rock-chips.com> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, May 03, 2016 at 08:07:41PM +0800, Caesar Wang wrote: > See the thermal code, the obvious typo from my editor. It looks like whitespace changes, not typos. Please be specific. > > Signed-off-by: Caesar Wang > --- > > Documentation/devicetree/bindings/thermal/thermal.txt | 10 +++++----- > drivers/thermal/thermal_core.c | 2 +- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt > index 41b817f..88b6ea1 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/thermal.txt > @@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below. > Required properties: > - #cooling-cells: Used to provide cooling device specific information > Type: unsigned while referring to it. Must be at least 2, in order > - Size: one cell to specify minimum and maximum cooling state used > + Size: one cell to specify minimum and maximum cooling state used > in the reference. The first cell is the minimum > cooling state requested and the second cell is > the maximum cooling state requested in the reference. > @@ -119,7 +119,7 @@ Required properties: > Optional property: > - contribution: The cooling contribution to the thermal zone of the > Type: unsigned referred cooling device at the referred trip point. > - Size: one cell The contribution is a ratio of the sum > + Size: one cell The contribution is a ratio of the sum > of all cooling contributions within a thermal zone. > > Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle > @@ -145,7 +145,7 @@ Required properties: > Size: one cell > > - thermal-sensors: A list of thermal sensor phandles and sensor specifier > - Type: list of used while monitoring the thermal zone. > + Type: list of used while monitoring the thermal zone. > phandles + sensor > specifier > > @@ -473,7 +473,7 @@ thermal-zones { > <&adc>; /* pcb north */ > > /* hotspot = 100 * bandgap - 120 * adc + 484 */ > - coefficients = <100 -120 484>; > + coefficients = <100 -120 484>; > > trips { > ... > @@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then: > thermal-sensors = <&adc>; > > /* hotspot = 1 * adc + 6000 */ > - coefficients = <1 6000>; > + coefficients = <1 6000>; > > (d) - Board thermal > > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index e5bfbd3..26870ef 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -513,7 +513,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp) > if (!ret && *temp < crit_temp) > *temp = tz->emul_temperature; > } > - > + > mutex_unlock(&tz->lock); > exit: > return ret; > -- > 1.9.1 >