From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
Andrea Venturi <ennesimamail.av@gmail.com>,
Code Kipper <codekipper@gmail.com>,
gianfranco@moddevices.com,
Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH 1/4] dt-bindings: Add A10 I2S controller binding documentation
Date: Wed, 1 Jun 2016 19:54:27 +0200 [thread overview]
Message-ID: <20160601175430.11625-2-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <20160601175430.11625-1-maxime.ripard@free-electrons.com>
Introduce the device tree binding for the I2S controller found in the
Allwinner A10 and later SoCs.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
.../devicetree/bindings/sound/sun4i-i2s.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sun4i-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
new file mode 100644
index 000000000000..365ca4eede5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -0,0 +1,33 @@
+* Allwinner A10 I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+ - "allwinner,sun4i-a10-i2s"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: should contain the I2S interrupt.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+ - "apb" : clock for the I2S bus interface
+ - "mod" : module clock for the I2S controller
+
+Example:
+
+i2s0: i2s@01c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clock-names = "apb", "mod";
+ dmas = <&dma SUN4I_DMA_NORMAL 3>,
+ <&dma SUN4I_DMA_NORMAL 3>;
+ dma-names = "rx", "tx";
+};
--
2.8.3
next prev parent reply other threads:[~2016-06-01 17:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-01 17:54 [PATCH 0/4] ASoC: sunxi: Add i2s controller support Maxime Ripard
2016-06-01 17:54 ` Maxime Ripard [this message]
2016-06-02 10:09 ` [PATCH 1/4] dt-bindings: Add A10 I2S controller binding documentation Mark Brown
2016-06-06 13:08 ` Rob Herring
2016-06-09 17:15 ` Maxime Ripard
2016-06-01 17:54 ` [PATCH 2/4] ASoC: sunxi: Add Allwinner A10 Digital Audio driver Maxime Ripard
2016-06-02 8:03 ` Code Kipper
2016-06-09 21:06 ` Maxime Ripard
2016-06-02 10:26 ` Mark Brown
2016-06-09 21:05 ` Maxime Ripard
2016-06-10 0:37 ` Mark Brown
2016-06-10 7:36 ` Maxime Ripard
2016-06-01 17:54 ` [PATCH 3/4] ARM: sun7i: Add mod1 clock nodes Maxime Ripard
2016-06-01 17:54 ` [PATCH 4/4] ARM: sun7i: Add DAI nodes Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160601175430.11625-2-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=ennesimamail.av@gmail.com \
--cc=gianfranco@moddevices.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®