From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756566AbcFGUmO (ORCPT ); Tue, 7 Jun 2016 16:42:14 -0400 Received: from down.free-electrons.com ([37.187.137.238]:52907 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751628AbcFGUmK (ORCPT ); Tue, 7 Jun 2016 16:42:10 -0400 From: Maxime Ripard To: Mike Turquette , Stephen Boyd , Chen-Yu Tsai Cc: linux-clk@vger.kernel.org, Hans de Goede , Andre Przywara , Rob Herring , Vishnu Patekar , linux-arm-kernel@lists.infradead.org, Boris Brezillon , Jean-Francois Moine , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Maxime Ripard Subject: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation Date: Tue, 7 Jun 2016 22:41:40 +0200 Message-Id: <20160607204154.31967-2-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.8.3 In-Reply-To: <20160607204154.31967-1-maxime.ripard@free-electrons.com> References: <20160607204154.31967-1-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Introduce a new binding with its documentation for the brand new clock sub-framework. Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt new file mode 100644 index 000000000000..2c66046a1342 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -0,0 +1,17 @@ +Allwinner Clock Control Unit Binding +------------------------------------ + +Required properties : +- compatible: must contain one of the following compatible: + - "allwinner,sun8i-h3-ccu" + +- reg: Must contain the registers base address and length +- clocks: phandle to the oscillators feeding the SPI controller. Two are + needed: + - "hosc": the high frequency oscillator (usually at 24MHz) + - "losc": the low frequency oscillator (usually at 32kHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: -- 2.8.3