From: Matthew Leach <matthew@mattleach.net>
To: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Matthew Leach <matthew@mattleach.net>
Subject: [PATCH] ARM: zImage: fix ATAG DTB conversion on big-endian
Date: Sat, 11 Jun 2016 18:54:59 +0100 [thread overview]
Message-ID: <20160611175459.5080-1-matthew@mattleach.net> (raw)
Since ATAGs are written out by the boot-loader before branching to the
kernel, they will be written as little-endian; if the kernel has been
built for big-endian, parsing of the ATAGs will fail.
When reading from the ATAGs structure, swap the endianness (when
required), allowing the DTB to be supplemented by the ATAG data.
Signed-off-by: Matthew Leach <matthew@mattleach.net>
---
arch/arm/boot/compressed/atags_to_fdt.c | 30 +++++++++++++++++-------------
arch/arm/include/uapi/asm/setup.h | 6 ++++--
2 files changed, 21 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 9448aa0..c7d3e74 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -123,9 +123,9 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
return 0;
/* validate the ATAG */
- if (atag->hdr.tag != ATAG_CORE ||
- (atag->hdr.size != tag_size(tag_core) &&
- atag->hdr.size != 2))
+ if (le32_to_cpu(atag->hdr.tag) != ATAG_CORE ||
+ (le32_to_cpu(atag->hdr.size) != tag_size(tag_core) &&
+ le32_to_cpu(atag->hdr.size) != 2))
return 1;
/* let's give it all the room it could need */
@@ -134,7 +134,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
return ret;
for_each_tag(atag, atag_list) {
- if (atag->hdr.tag == ATAG_CMDLINE) {
+ if (le32_to_cpu(atag->hdr.tag) == ATAG_CMDLINE) {
/* Append the ATAGS command line to the device tree
* command line.
* NB: This means that if the same parameter is set in
@@ -147,10 +147,10 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ } else if (le32_to_cpu(atag->hdr.tag) == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
- if (!atag->u.mem.size)
+ if (!le32_to_cpu(atag->u.mem.size))
continue;
memsize = get_cell_size(fdt);
@@ -161,20 +161,24 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
uint64_t *mem_reg_prop64 =
(uint64_t *)mem_reg_property;
mem_reg_prop64[memcount++] =
- cpu_to_fdt64(atag->u.mem.start);
+ cpu_to_fdt64(
+ le32_to_cpu(atag->u.mem.start));
mem_reg_prop64[memcount++] =
- cpu_to_fdt64(atag->u.mem.size);
+ cpu_to_fdt64(
+ le32_to_cpu(atag->u.mem.size));
} else {
mem_reg_property[memcount++] =
- cpu_to_fdt32(atag->u.mem.start);
+ cpu_to_fdt32(
+ le32_to_cpu(atag->u.mem.start));
mem_reg_property[memcount++] =
- cpu_to_fdt32(atag->u.mem.size);
+ cpu_to_fdt32(
+ le32_to_cpu(atag->u.mem.size));
}
- } else if (atag->hdr.tag == ATAG_INITRD2) {
+ } else if (le32_to_cpu(atag->hdr.tag) == ATAG_INITRD2) {
uint32_t initrd_start, initrd_size;
- initrd_start = atag->u.initrd.start;
- initrd_size = atag->u.initrd.size;
+ initrd_start = le32_to_cpu(atag->u.initrd.start);
+ initrd_size = le32_to_cpu(atag->u.initrd.size);
setprop_cell(fdt, "/chosen", "linux,initrd-start",
initrd_start);
setprop_cell(fdt, "/chosen", "linux,initrd-end",
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 979ff40..00df12a 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -177,11 +177,13 @@ struct tagtable {
((unsigned long)(&((struct tag *)0L)->member + 1) \
<= (tag)->hdr.size * 4)
-#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size))
+#define tag_next(t) ((struct tag *)((__u32 *)(t) + \
+ le32_to_cpu((t)->hdr.size)))
+
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
#define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
+ for (t = base; le32_to_cpu(t->hdr.size); t = tag_next(t))
#endif /* _UAPI__ASMARM_SETUP_H */
--
2.8.3
reply other threads:[~2016-06-11 17:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160611175459.5080-1-matthew@mattleach.net \
--to=matthew@mattleach.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®