From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
Sekhar Nori <nsekhar@ti.com>, Mugunthan V N <mugunthanvnm@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 14/15] drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdio
Date: Wed, 15 Jun 2016 14:56:02 +0300 [thread overview]
Message-ID: <20160615115603.4897-15-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20160615115603.4897-1-grygorii.strashko@ti.com>
Use "ti,cpsw-mdio" to enable PM runtime auto-suspend on supported
platforms, where MDIO is implemented as part of TI CPSW.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/net/ethernet/ti/davinci_mdio.c | 45 +++++++++++++++++++++++++---------
1 file changed, 34 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index ce3ec42..d1fb734 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -53,6 +53,10 @@
#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */
+struct davinci_mdio_of_param {
+ int autosuspend_delay_ms;
+};
+
struct davinci_mdio_regs {
u32 version;
u32 control;
@@ -332,6 +336,19 @@ static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
}
#endif
+#if IS_ENABLED(CONFIG_OF)
+static const struct davinci_mdio_of_param of_cpsw_mdio_data = {
+ .autosuspend_delay_ms = 100,
+};
+
+static const struct of_device_id davinci_mdio_of_mtable[] = {
+ { .compatible = "ti,davinci_mdio", },
+ { .compatible = "ti,cpsw-mdio", .data = &of_cpsw_mdio_data},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable);
+#endif
+
static int davinci_mdio_probe(struct platform_device *pdev)
{
struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -340,6 +357,7 @@ static int davinci_mdio_probe(struct platform_device *pdev)
struct resource *res;
struct phy_device *phy;
int ret, addr;
+ int autosuspend_delay_ms = -1;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -352,9 +370,22 @@ static int davinci_mdio_probe(struct platform_device *pdev)
}
if (dev->of_node) {
- if (davinci_mdio_probe_dt(&data->pdata, pdev))
- data->pdata = default_pdata;
+ const struct of_device_id *of_id;
+
+ ret = davinci_mdio_probe_dt(data, pdev);
+ if (ret)
+ return ret;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+
+ of_id = of_match_device(davinci_mdio_of_mtable, &pdev->dev);
+ if (of_id) {
+ const struct davinci_mdio_of_param *of_mdio_data;
+
+ of_mdio_data = of_id->data;
+ if (of_mdio_data)
+ autosuspend_delay_ms =
+ of_mdio_data->autosuspend_delay_ms;
+ }
} else {
data->pdata = pdata ? (*pdata) : default_pdata;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
@@ -384,7 +415,7 @@ static int davinci_mdio_probe(struct platform_device *pdev)
davinci_mdio_init_clk(data);
- pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, autosuspend_delay_ms);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -495,14 +526,6 @@ static const struct dev_pm_ops davinci_mdio_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(davinci_mdio_suspend, davinci_mdio_resume)
};
-#if IS_ENABLED(CONFIG_OF)
-static const struct of_device_id davinci_mdio_of_mtable[] = {
- { .compatible = "ti,davinci_mdio", },
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable);
-#endif
-
static struct platform_driver davinci_mdio_driver = {
.driver = {
.name = "davinci_mdio",
--
2.8.4
next prev parent reply other threads:[~2016-06-15 11:58 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-15 11:55 [PATCH 00/15] drivers: net: cpsw: improve runtime pm Grygorii Strashko
2016-06-15 11:55 ` [PATCH 01/15] drivers: net: cpsw: fix suspend when all ethX devices are down Grygorii Strashko
2016-06-15 11:55 ` [PATCH 02/15] drivers: net: cpsw: check return code from pm runtime calls Grygorii Strashko
2016-06-15 11:55 ` [PATCH 03/15] drivers: net: cpsw: remove pm runtime calls from suspend callbacks Grygorii Strashko
2016-06-15 11:55 ` [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device Grygorii Strashko
2016-06-15 16:14 ` Florian Fainelli
2016-06-15 16:45 ` Grygorii Strashko
2016-06-16 12:48 ` Ivan Khoronzhuk
2016-06-16 13:32 ` Ivan Khoronzhuk
2016-06-15 11:55 ` [PATCH 05/15] drivers: net: cpsw: ndev: " Grygorii Strashko
2016-06-15 11:55 ` [PATCH 06/15] drivers: net: davinci_mdio: do pm runtime initialization later in probe Grygorii Strashko
2016-06-15 11:55 ` [PATCH 07/15] drivers: net: davinci_mdio: remove pm runtime calls from suspend callbacks Grygorii Strashko
2016-06-15 11:55 ` [PATCH 08/15] drivers: net: davinci_mdio: drop suspended and lock fields from mdio_data Grygorii Strashko
2016-06-15 11:55 ` [PATCH 09/15] drivers: net: davinci_mdio: split reset function on init_clk and enable Grygorii Strashko
2016-06-15 11:55 ` [PATCH 10/15] drivers: net: davinci_mdio: add pm runtime callbacks Grygorii Strashko
2016-06-15 11:55 ` [PATCH 11/15] drivers: net: davinci_mdio: implement pm runtime auto mode Grygorii Strashko
2016-06-15 11:56 ` [PATCH 12/15] net: davinci_mdio: document missed "ti,am4372-mdio" compat string Grygorii Strashko
2016-06-19 14:35 ` Rob Herring
2016-06-22 10:26 ` Grygorii Strashko
2016-06-15 11:56 ` [PATCH 13/15] net: davinci_mdio: introduce "ti,cpsw-mdio" " Grygorii Strashko
2016-06-15 11:56 ` Grygorii Strashko [this message]
2016-06-15 13:48 ` [PATCH 14/15] drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdio kbuild test robot
2016-06-15 11:56 ` [PATCH 15/15] ARM: dts: am335x/am437x/dra7: use new "ti,cpsw-mdio" compat string Grygorii Strashko
2016-06-21 11:34 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160615115603.4897-15-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®