From: Xinliang Liu <xinliang.liu@linaro.org>
To: p.zabel@pengutronix.de
Cc: linux-kernel@vger.kernel.org, robh+dt@kernel.org,
xuwei5@hisilicon.com, puck.chen@hisilicon.com,
saberlily.xia@hisilicon.com, kong.kongxinwei@hisilicon.com,
guodong.xu@linaro.org, Xinliang Liu <xinliang.liu@linaro.org>
Subject: [PATCH v3 3/4] reset: hisilicon: Change to syscon register access
Date: Mon, 20 Jun 2016 11:50:06 +0800 [thread overview]
Message-ID: <20160620035007.229629-4-xinliang.liu@linaro.org> (raw)
In-Reply-To: <20160620035007.229629-1-xinliang.liu@linaro.org>
From: Chen Feng <puck.chen@hisilicon.com>
There are two reset controllers in hi6220 SoC:
The peripheral reset controller bits are part of sysctrl registers.
The media reset controller bits are part of mediactrl registers.
So change register access to syscon way.
And rename current reset controller to peripheral one.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Xia Qing <saberlily.xia@hisilicon.com>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
---
drivers/reset/hisilicon/hi6220_reset.c | 85 ++++++++++++++++++----------------
1 file changed, 45 insertions(+), 40 deletions(-)
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
index 8f55fd4a2630..686fea9e2c54 100644
--- a/drivers/reset/hisilicon/hi6220_reset.c
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -1,7 +1,8 @@
/*
* Hisilicon Hi6220 reset controller driver
*
- * Copyright (c) 2015 Hisilicon Limited.
+ * Copyright (c) 2016 Linaro Limited.
+ * Copyright (c) 2015-2016 Hisilicon Limited.
*
* Author: Feng Chen <puck.chen@hisilicon.com>
*
@@ -15,81 +16,85 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/reset-controller.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
-#define ASSERT_OFFSET 0x300
-#define DEASSERT_OFFSET 0x304
-#define MAX_INDEX 0x509
+#define PERIPH_ASSERT_OFFSET 0x300
+#define PERIPH_DEASSERT_OFFSET 0x304
+#define PERIPH_MAX_INDEX 0x509
#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
struct hi6220_reset_data {
- void __iomem *assert_base;
- void __iomem *deassert_base;
- struct reset_controller_dev rc_dev;
+ struct reset_controller_dev rc_dev;
+ struct regmap *regmap;
};
-static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
- unsigned long idx)
+static int hi6220_peripheral_assert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
{
struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ u32 bank = idx >> 8;
+ u32 offset = idx & 0xff;
+ u32 reg = PERIPH_ASSERT_OFFSET + bank * 0x10;
- int bank = idx >> 8;
- int offset = idx & 0xff;
-
- writel(BIT(offset), data->assert_base + (bank * 0x10));
-
- return 0;
+ return regmap_write(regmap, reg, BIT(offset));
}
-static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
- unsigned long idx)
+static int hi6220_peripheral_deassert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
{
struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ u32 bank = idx >> 8;
+ u32 offset = idx & 0xff;
+ u32 reg = PERIPH_DEASSERT_OFFSET + bank * 0x10;
- int bank = idx >> 8;
- int offset = idx & 0xff;
-
- writel(BIT(offset), data->deassert_base + (bank * 0x10));
-
- return 0;
+ return regmap_write(regmap, reg, BIT(offset));
}
-static const struct reset_control_ops hi6220_reset_ops = {
- .assert = hi6220_reset_assert,
- .deassert = hi6220_reset_deassert,
+static const struct reset_control_ops hi6220_peripheral_reset_ops = {
+ .assert = hi6220_peripheral_assert,
+ .deassert = hi6220_peripheral_deassert,
};
static int hi6220_reset_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
struct hi6220_reset_data *data;
- struct resource *res;
- void __iomem *src_base;
+ struct regmap *regmap;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- src_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(src_base))
- return PTR_ERR(src_base);
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get reset controller regmap\n");
+ return PTR_ERR(regmap);
+ }
- data->assert_base = src_base + ASSERT_OFFSET;
- data->deassert_base = src_base + DEASSERT_OFFSET;
- data->rc_dev.nr_resets = MAX_INDEX;
- data->rc_dev.ops = &hi6220_reset_ops;
- data->rc_dev.of_node = pdev->dev.of_node;
+ data->regmap = regmap;
+ data->rc_dev.of_node = np;
+ data->rc_dev.ops = &hi6220_peripheral_reset_ops;
+ data->rc_dev.nr_resets = PERIPH_MAX_INDEX;
return reset_controller_register(&data->rc_dev);
}
static const struct of_device_id hi6220_reset_match[] = {
- { .compatible = "hisilicon,hi6220-sysctrl" },
- { },
+ {
+ .compatible = "hisilicon,hi6220-sysctrl",
+ },
+ { /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, hi6220_reset_match);
static struct platform_driver hi6220_reset_driver = {
.probe = hi6220_reset_probe,
--
2.8.3
next prev parent reply other threads:[~2016-06-20 3:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 3:50 [PATCH v3 0/4] Add hi6220 media subsystem reset controller driver Xinliang Liu
2016-06-20 3:50 ` [PATCH v3 1/4] reset: hisilicon: Add media reset controller binding Xinliang Liu
2016-06-20 12:07 ` Philipp Zabel
2016-06-20 13:55 ` Xinliang Liu
2016-06-20 3:50 ` [PATCH v3 2/4] arm64: dts: hi6220: Add media subsystem reset dts Xinliang Liu
2016-06-20 3:50 ` Xinliang Liu [this message]
2016-06-20 3:50 ` [PATCH v3 4/4] reset: hisilicon: Add hi6220 media subsystem reset support Xinliang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160620035007.229629-4-xinliang.liu@linaro.org \
--to=xinliang.liu@linaro.org \
--cc=guodong.xu@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=puck.chen@hisilicon.com \
--cc=robh+dt@kernel.org \
--cc=saberlily.xia@hisilicon.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®