[PATCH 1161/1285] Replace numeric parameter like 0444 with macro

[Baole Ni <baolex.ni@intel.com>]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
 sound/drivers/mpu401/mpu401.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index fed7e7e..6076b54 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -43,21 +43,21 @@ static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;	/* MPU-401 port number */
 static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;	/* MPU-401 IRQ */
 static bool uart_enter[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
 
-module_param_array(index, int, NULL, 0444);
+module_param_array(index, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(index, "Index value for MPU-401 device.");
-module_param_array(id, charp, NULL, 0444);
+module_param_array(id, charp, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(id, "ID string for MPU-401 device.");
-module_param_array(enable, bool, NULL, 0444);
+module_param_array(enable, bool, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(enable, "Enable MPU-401 device.");
 #ifdef CONFIG_PNP
-module_param_array(pnp, bool, NULL, 0444);
+module_param_array(pnp, bool, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(pnp, "PnP detection for MPU-401 device.");
 #endif
-module_param_array(port, long, NULL, 0444);
+module_param_array(port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(port, "Port # for MPU-401 device.");
-module_param_array(irq, int, NULL, 0444);
+module_param_array(irq, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device.");
-module_param_array(uart_enter, bool, NULL, 0444);
+module_param_array(uart_enter, bool, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open.");
 
 static struct platform_device *platform_devices[SNDRV_CARDS];
-- 
2.9.2