Re: [PATCH v2 2/5] arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes

[Rob Herring <robh@kernel.org>]

On Wed, Aug 10, 2016 at 12:13:56PM +0530, Rajendra Nayak wrote:
> TSENS is part of GCC, hence add TSENS properties as part of GCC node.
> Also add thermal zones and qfprom nodes.
> Update GCC bindings doc to mention the possibility of optional TSENS
> properties that can be part of GCC node.
> 
> Acked-by: Eduardo Valentin <edubezval@gmail.com>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  .../devicetree/bindings/clock/qcom,gcc.txt         |  18 ++++
>  arch/arm/boot/dts/qcom-apq8064.dtsi                | 103 +++++++++++++++++++++
>  2 files changed, 121 insertions(+)

A couple of nits, otherwise:

Acked-by: Rob Herring <robh@kernel.org>

> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> index 9a60fde..16e2f84 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> @@ -23,6 +23,13 @@ Required properties :
>  Optional properties :
>  - #power-domain-cells : shall contain 1
>  
> +Optional properties:

It already has this section above.

> +- Qualcomm TSENS (thermal sensor device) on some devices can
> +be part of GCC and hence the TSENS properties can also be
> +part of the GCC/clock-controller node.
> +For more details on the TSENS properties please refer
> +Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +
>  Example:
>  	clock-controller@900000 {
>  		compatible = "qcom,gcc-msm8960";
> @@ -31,3 +38,14 @@ Example:
>  		#reset-cells = <1>;
>  		#power-domain-cells = <1>;
>  	};
> +
> +Example of GCC with TSENS properties:
> +	clock-controller@900000 {
> +		compatible = "qcom,gcc-apq8064";
> +		reg = <0x00900000 0x4000>;
> +		nvmem-cells = <&tsens_calib>, <&tsens_backup>;
> +		nvmem-cell-names = "calib", "calib_backup";
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +		#thermal-sensor-cells = <1>;
> +	};
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 74a9b6c..9cd13ab 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -86,6 +86,92 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu-thermal0 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&gcc 7>;
> +			coefficients = <1199 0>;
> +
> +			trips {
> +				cpu_alert0: trip0 {
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				cpu_crit0: trip1 {
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu-thermal1 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&gcc 8>;
> +			coefficients = <1132 0>;
> +
> +			trips {
> +				cpu_alert1: trip0 {
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				cpu_crit1: trip1 {
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu-thermal2 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&gcc 9>;
> +			coefficients = <1199 0>;
> +
> +			trips {
> +				cpu_alert2: trip0 {
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				cpu_crit2: trip1 {
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu-thermal3 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&gcc 10>;
> +			coefficients = <1132 0>;
> +
> +			trips {
> +				cpu_alert3: trip0 {
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				cpu_crit3: trip1 {
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	cpu-pmu {
>  		compatible = "qcom,krait-pmu";
>  		interrupts = <1 10 0x304>;
> @@ -611,11 +697,28 @@
>  			};
>  		};
>  
> +		qfprom: qfprom@00700000 {

Drop leading 0s.

> +			compatible	= "qcom,qfprom";
> +			reg		= <0x00700000 0x1000>;
> +			#address-cells	= <1>;
> +			#size-cells	= <1>;
> +			ranges;
> +			tsens_calib: calib {
> +				reg = <0x404 0x10>;
> +			};
> +			tsens_backup: backup_calib {
> +				reg = <0x414 0x10>;
> +			};
> +		};
> +
>  		gcc: clock-controller@900000 {
>  			compatible = "qcom,gcc-apq8064";
>  			reg = <0x00900000 0x4000>;
> +			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
> +			nvmem-cell-names = "calib", "calib_backup";
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
> +			#thermal-sensor-cells = <1>;
>  		};
>  
>  		lcc: clock-controller@28000000 {
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html