From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932390AbcHPJgB (ORCPT ); Tue, 16 Aug 2016 05:36:01 -0400 Received: from mail-wm0-f46.google.com ([74.125.82.46]:38429 "EHLO mail-wm0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753665AbcHPJf4 (ORCPT ); Tue, 16 Aug 2016 05:35:56 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: kernel@stlinux.com, patrice.chotard@st.com, thierry.reding@gmail.com, linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, Lee Jones Subject: [PATCH v4 17/17] dt-bindings: pwm: sti: Update DT bindings with recent changes Date: Tue, 16 Aug 2016 10:35:08 +0100 Message-Id: <20160816093508.28307-18-lee.jones@linaro.org> X-Mailer: git-send-email 2.9.0 In-Reply-To: <20160816093508.28307-1-lee.jones@linaro.org> References: <20160816093508.28307-1-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org We're renaming the 'st,pwm-num-chan' binding to 'st,pwm-num-devs' to be more inline with the naming conventions of the subsystem. Where we used to treat each line as a channel, the PWM convention is to describe them as devices. The second documentation adaption entails adding support for PWM capture devices. A new clock is required as well as an IRQ line. We're also adding a new property similar to the one described above, but for capture channels. Typically, there will be less capture channels than PWM-out, since all channels have the latter capability, but only some have capture support. Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/pwm/pwm-st.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt index 84d2fb8..19fce77 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-st.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt @@ -13,13 +13,14 @@ Required parameters: - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. For Pinctrl properties, please refer to [1]. -- clock-names: Set to "pwm". +- clock-names: Valid entries are "pwm" and/or "capture". - clocks: phandle of the clock used by the PWM module. For Clk properties, please refer to [2]. +- interrupts: IRQ for the Capture device Optional properties: -- st,pwm-num-chan: Number of available channels. If not passed, the driver - will consider single channel by default. +- st,pwm-num-chan: Number of available PWM channels. Default is 0. +- st,capture-num-chan: Number of available Capture channels. Default is 0. [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt [2] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -38,4 +39,5 @@ pwm1: pwm@fe510000 { clocks = <&clk_sysin>; clock-names = "pwm"; st,pwm-num-chan = <4>; + st,capture-num-chan = <2>; }; -- 2.9.0