From: Bjorn Helgaas <bhelgaas@google.com>
To: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: jszhang@marvell.com, jingoohan1@gmail.com,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH v6 1/4] PCI: designware: Return data directly from dw_pcie_readl_rc()
Date: Wed, 17 Aug 2016 14:59:50 -0500 [thread overview]
Message-ID: <20160817195950.10418.13098.stgit@bhelgaas-glaptop2.roam.corp.google.com> (raw)
In-Reply-To: <20160817195239.10418.7037.stgit@bhelgaas-glaptop2.roam.corp.google.com>
dw_pcie_readl_rc() reads a u32 value. Previously we stored that value in
space supplied by the caller. Return the u32 value directly instead.
This makes the calling code read better and makes it obvious that the
caller need not initialize the storage. In the following example it isn't
clear whether "val" is initialized before being used:
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
if (val & PCI_COMMAND_MEMORY)
...
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/host/pci-exynos.c | 9 ++++++---
drivers/pci/host/pcie-designware.c | 20 ++++++++++----------
drivers/pci/host/pcie-designware.h | 3 +--
3 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci-exynos.c
index 2199761..490f8b6 100644
--- a/drivers/pci/host/pci-exynos.c
+++ b/drivers/pci/host/pci-exynos.c
@@ -425,12 +425,15 @@ static void exynos_pcie_enable_interrupts(struct pcie_port *pp)
exynos_pcie_msi_init(pp);
}
-static inline void exynos_pcie_readl_rc(struct pcie_port *pp,
- void __iomem *dbi_base, u32 *val)
+static inline u32 exynos_pcie_readl_rc(struct pcie_port *pp,
+ void __iomem *dbi_base)
{
+ u32 val;
+
exynos_pcie_sideband_dbi_r_mode(pp, true);
- *val = readl(dbi_base);
+ val = readl(dbi_base);
exynos_pcie_sideband_dbi_r_mode(pp, false);
+ return val;
}
static inline void exynos_pcie_writel_rc(struct pcie_port *pp,
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 12afce1..1f6bd6d 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -115,12 +115,12 @@ int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val)
return PCIBIOS_SUCCESSFUL;
}
-static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val)
+static inline u32 dw_pcie_readl_rc(struct pcie_port *pp, u32 reg)
{
if (pp->ops->readl_rc)
- pp->ops->readl_rc(pp, pp->dbi_base + reg, val);
- else
- *val = readl(pp->dbi_base + reg);
+ return pp->ops->readl_rc(pp, pp->dbi_base + reg);
+
+ return readl(pp->dbi_base + reg);
}
static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
@@ -169,7 +169,7 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
- dw_pcie_readl_rc(pp, PCIE_ATU_CR2, &val);
+ val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2);
}
static struct irq_chip dw_msi_irq_chip = {
@@ -720,7 +720,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
u32 val;
/* set the number of lanes */
- dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
+ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL);
val &= ~PORT_LINK_MODE_MASK;
switch (pp->lanes) {
case 1:
@@ -742,7 +742,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL);
/* set link width speed control register */
- dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
+ val = dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL);
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
switch (pp->lanes) {
case 1:
@@ -765,19 +765,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
dw_pcie_writel_rc(pp, 0x00000000, PCI_BASE_ADDRESS_1);
/* setup interrupt pins */
- dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val);
+ val = dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE);
val &= 0xffff00ff;
val |= 0x00000100;
dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE);
/* setup bus numbers */
- dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val);
+ val = dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS);
val &= 0xff000000;
val |= 0x00010100;
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
/* setup command register */
- dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
+ val = dw_pcie_readl_rc(pp, PCI_COMMAND);
val &= 0xffff0000;
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index f437f9b..74a8fc6 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -57,8 +57,7 @@ struct pcie_port {
};
struct pcie_host_ops {
- void (*readl_rc)(struct pcie_port *pp,
- void __iomem *dbi_base, u32 *val);
+ u32 (*readl_rc)(struct pcie_port *pp, void __iomem *dbi_base);
void (*writel_rc)(struct pcie_port *pp,
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
next prev parent reply other threads:[~2016-08-17 19:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 19:59 [PATCH v6 0/4] pcie-designware: add iATU unroll feature Bjorn Helgaas
2016-08-17 19:59 ` Bjorn Helgaas [this message]
2016-08-17 19:59 ` [PATCH v6 2/4] PCI: designware: Move link wait definitions to .c file Bjorn Helgaas
2016-08-17 20:00 ` [PATCH v6 3/4] PCI: designware: Wait for iATU enable Bjorn Helgaas
2016-08-17 20:00 ` [PATCH v6 4/4] PCI: designware: Add iATU Unroll feature Bjorn Helgaas
2016-08-17 20:38 ` kbuild test robot
2016-11-16 0:22 ` Tim Harvey
2016-11-16 0:30 ` Fabio Estevam
2016-11-16 16:15 ` Tim Harvey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160817195950.10418.13098.stgit@bhelgaas-glaptop2.roam.corp.google.com \
--to=bhelgaas@google.com \
--cc=Joao.Pinto@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=jszhang@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®