[PATCH] Documentation: move oneshot trigger attributes documentation to ABI

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

Documentation of sysfs interface should be in ABI in the first place.
This moves relevant part of documentation and mentions where to look for
it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 Documentation/ABI/testing/sysfs-class-led          |  3 +-
 .../ABI/testing/sysfs-class-led-trigger-oneshot    | 37 ++++++++++++++++++++++
 Documentation/leds/ledtrig-oneshot.txt             | 20 ++----------
 3 files changed, 41 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-oneshot

diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index 3646ec8..86ace28 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -24,7 +24,8 @@ Description:
 		of led events.
 		You can change triggers in a similar manner to the way an IO
 		scheduler is chosen. Trigger specific parameters can appear in
-		/sys/class/leds/<led> once a given trigger is selected.
+		/sys/class/leds/<led> once a given trigger is selected. For
+		their documentation see sysfs-class-led-trigger-*.
 
 What:		/sys/class/leds/<led>/inverted
 Date:		January 2011
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot b/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
new file mode 100644
index 0000000..401cbe6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
@@ -0,0 +1,37 @@
+What:		/sys/class/leds/<led>/delay_on
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_FULL brightness after it has been armed.
+		Default to 100 ms.
+
+
+What:		/sys/class/leds/<led>/delay_off
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_OFF brightness after it has been armed.
+		Default to 100 ms.
+
+What:		/sys/class/leds/<led>/invert
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Reverse the blink logic.  If set to 0 (default) blink on for
+		delay_on ms, then blink off for delay_off ms, leaving the LED
+		normally off.  If set to 1, blink off for delay_off ms, then
+		blink on for delay_on ms, leaving the LED normally on.
+		Setting this value also immediately change the LED state.
+
+What:		/sys/class/leds/<led>/shot
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Write any non-empty string to signal an events, this starts a
+		blink sequence if not already running.
diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.txt
index 07cd1fa..fe57474 100644
--- a/Documentation/leds/ledtrig-oneshot.txt
+++ b/Documentation/leds/ledtrig-oneshot.txt
@@ -21,24 +21,8 @@ below:
 
   echo oneshot > trigger
 
-This adds the following sysfs attributes to the LED:
-
-  delay_on - specifies for how many milliseconds the LED has to stay at
-             LED_FULL brightness after it has been armed.
-             Default to 100 ms.
-
-  delay_off - specifies for how many milliseconds the LED has to stay at
-              LED_OFF brightness after it has been armed.
-              Default to 100 ms.
-
-  invert - reverse the blink logic.  If set to 0 (default) blink on for delay_on
-           ms, then blink off for delay_off ms, leaving the LED normally off.  If
-           set to 1, blink off for delay_off ms, then blink on for delay_on ms,
-           leaving the LED normally on.
-           Setting this value also immediately change the LED state.
-
-  shot - write any non-empty string to signal an events, this starts a blink
-         sequence if not already running.
+This adds sysfs attributes to the LED that are documented in:
+Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
 
 Example use-case: network devices, initialization:
 
-- 
2.9.3