From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756042AbcH1Rmc (ORCPT ); Sun, 28 Aug 2016 13:42:32 -0400 Received: from gagarine.paulk.fr ([109.190.93.129]:53499 "EHLO gagarine.paulk.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755971AbcH1Rm0 (ORCPT ); Sun, 28 Aug 2016 13:42:26 -0400 From: Paul Kocialkowski To: linux-kernel@vger.kernel.org Cc: linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Alexandre Courbot , Thierry Reding , Stephen Warren , Paul Kocialkowski Subject: [PATCH 2/4] ARM: tegra: nyan: Use external control for bq24735 charger Date: Sun, 28 Aug 2016 19:32:44 +0200 Message-Id: <20160828173246.32621-2-contact@paulk.fr> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20160828173246.32621-1-contact@paulk.fr> References: <20160828173246.32621-1-contact@paulk.fr> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Nyan boards come with an embedded controller that controls when to enable and disable the charge. Thus, it should not be left up to the kernel to handle that. Using the ti,external-control property allows specifying this use-case. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/tegra124-nyan.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 30a77ec..18db797 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -329,6 +329,7 @@ ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + ti,external-control; }; battery: sbs-battery@b { -- 2.9.3