mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org
Cc: Johan Hovold <johan@hovoldconsulting.com>,
	Rui Miguel Silva <rmfrfs@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sandeep Patil <sspatil@google.com>,
	Matt Porter <mporter@kernel.crashing.org>,
	John Stultz <john.stultz@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Alex Elder <elder@linaro.org>, David Lin <dtwlin@google.com>,
	"Bryan O'Donoghue" <pure.logic@nexus-software.ie>,
	Vaibhav Agarwal <vaibhav.agarwal@linaro.org>,
	Mark Greer <mgreer@animalcreek.com>
Subject: [patch 13/32] greybus: HID driver
Date: Fri, 16 Sep 2016 16:09:59 +0200	[thread overview]
Message-ID: <20160916140959.GA1252@kroah.com> (raw)
In-Reply-To: <20160916064058.GA17821@kroah.com>


This driver implements the Greybus HID protocol.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/greybus/hid.c |  536 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 536 insertions(+)

--- /dev/null
+++ b/drivers/greybus/hid.c
@@ -0,0 +1,536 @@
+/*
+ * HID class driver for the Greybus.
+ *
+ * Copyright 2014 Google Inc.
+ * Copyright 2014 Linaro Ltd.
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/bitops.h>
+#include <linux/hid.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include "greybus.h"
+
+/* Greybus HID device's structure */
+struct gb_hid {
+	struct gb_bundle *bundle;
+	struct gb_connection		*connection;
+
+	struct hid_device		*hid;
+	struct gb_hid_desc_response	hdesc;
+
+	unsigned long			flags;
+#define GB_HID_STARTED			0x01
+#define GB_HID_READ_PENDING		0x04
+
+	unsigned int			bufsize;
+	char				*inbuf;
+};
+
+static DEFINE_MUTEX(gb_hid_open_mutex);
+
+/* Routines to get controller's information over greybus */
+
+/* Operations performed on greybus */
+static int gb_hid_get_desc(struct gb_hid *ghid)
+{
+	return gb_operation_sync(ghid->connection, GB_HID_TYPE_GET_DESC, NULL,
+				 0, &ghid->hdesc, sizeof(ghid->hdesc));
+}
+
+static int gb_hid_get_report_desc(struct gb_hid *ghid, char *rdesc)
+{
+	int ret;
+
+	ret = gb_pm_runtime_get_sync(ghid->bundle);
+	if (ret)
+		return ret;
+
+	ret = gb_operation_sync(ghid->connection, GB_HID_TYPE_GET_REPORT_DESC,
+				 NULL, 0, rdesc,
+				 le16_to_cpu(ghid->hdesc.wReportDescLength));
+
+	gb_pm_runtime_put_autosuspend(ghid->bundle);
+
+	return ret;
+}
+
+static int gb_hid_set_power(struct gb_hid *ghid, int type)
+{
+	int ret;
+
+	ret = gb_pm_runtime_get_sync(ghid->bundle);
+	if (ret)
+		return ret;
+
+	ret = gb_operation_sync(ghid->connection, type, NULL, 0, NULL, 0);
+
+	gb_pm_runtime_put_autosuspend(ghid->bundle);
+
+	return ret;
+}
+
+static int gb_hid_get_report(struct gb_hid *ghid, u8 report_type, u8 report_id,
+			     unsigned char *buf, int len)
+{
+	struct gb_hid_get_report_request request;
+	int ret;
+
+	ret = gb_pm_runtime_get_sync(ghid->bundle);
+	if (ret)
+		return ret;
+
+	request.report_type = report_type;
+	request.report_id = report_id;
+
+	ret = gb_operation_sync(ghid->connection, GB_HID_TYPE_GET_REPORT,
+				 &request, sizeof(request), buf, len);
+
+	gb_pm_runtime_put_autosuspend(ghid->bundle);
+
+	return ret;
+}
+
+static int gb_hid_set_report(struct gb_hid *ghid, u8 report_type, u8 report_id,
+			     unsigned char *buf, int len)
+{
+	struct gb_hid_set_report_request *request;
+	struct gb_operation *operation;
+	int ret, size = sizeof(*request) + len - 1;
+
+	ret = gb_pm_runtime_get_sync(ghid->bundle);
+	if (ret)
+		return ret;
+
+	operation = gb_operation_create(ghid->connection,
+					GB_HID_TYPE_SET_REPORT, size, 0,
+					GFP_KERNEL);
+	if (!operation) {
+		gb_pm_runtime_put_autosuspend(ghid->bundle);
+		return -ENOMEM;
+	}
+
+	request = operation->request->payload;
+	request->report_type = report_type;
+	request->report_id = report_id;
+	memcpy(request->report, buf, len);
+
+	ret = gb_operation_request_send_sync(operation);
+	if (ret) {
+		dev_err(&operation->connection->bundle->dev,
+			"failed to set report: %d\n", ret);
+	} else {
+		ret = len;
+	}
+
+	gb_operation_put(operation);
+	gb_pm_runtime_put_autosuspend(ghid->bundle);
+
+	return ret;
+}
+
+static int gb_hid_request_handler(struct gb_operation *op)
+{
+	struct gb_connection *connection = op->connection;
+	struct gb_hid *ghid = gb_connection_get_data(connection);
+	struct gb_hid_input_report_request *request = op->request->payload;
+
+	if (op->type != GB_HID_TYPE_IRQ_EVENT) {
+		dev_err(&connection->bundle->dev,
+			"unsupported unsolicited request\n");
+		return -EINVAL;
+	}
+
+	if (test_bit(GB_HID_STARTED, &ghid->flags))
+		hid_input_report(ghid->hid, HID_INPUT_REPORT,
+				 request->report, op->request->payload_size, 1);
+
+	return 0;
+}
+
+static int gb_hid_report_len(struct hid_report *report)
+{
+	return ((report->size - 1) >> 3) + 1 +
+		report->device->report_enum[report->type].numbered;
+}
+
+static void gb_hid_find_max_report(struct hid_device *hid, unsigned int type,
+				   unsigned int *max)
+{
+	struct hid_report *report;
+	unsigned int size;
+
+	list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
+		size = gb_hid_report_len(report);
+		if (*max < size)
+			*max = size;
+	}
+}
+
+static void gb_hid_free_buffers(struct gb_hid *ghid)
+{
+	kfree(ghid->inbuf);
+	ghid->inbuf = NULL;
+	ghid->bufsize = 0;
+}
+
+static int gb_hid_alloc_buffers(struct gb_hid *ghid, size_t bufsize)
+{
+	ghid->inbuf = kzalloc(bufsize, GFP_KERNEL);
+	if (!ghid->inbuf)
+		return -ENOMEM;
+
+	ghid->bufsize = bufsize;
+
+	return 0;
+}
+
+/* Routines dealing with reports */
+static void gb_hid_init_report(struct gb_hid *ghid, struct hid_report *report)
+{
+	unsigned int size;
+
+	size = gb_hid_report_len(report);
+	if (gb_hid_get_report(ghid, report->type, report->id, ghid->inbuf,
+			      size))
+		return;
+
+	/*
+	 * hid->driver_lock is held as we are in probe function,
+	 * we just need to setup the input fields, so using
+	 * hid_report_raw_event is safe.
+	 */
+	hid_report_raw_event(ghid->hid, report->type, ghid->inbuf, size, 1);
+}
+
+static void gb_hid_init_reports(struct gb_hid *ghid)
+{
+	struct hid_device *hid = ghid->hid;
+	struct hid_report *report;
+
+	list_for_each_entry(report,
+		&hid->report_enum[HID_INPUT_REPORT].report_list, list)
+		gb_hid_init_report(ghid, report);
+
+	list_for_each_entry(report,
+		&hid->report_enum[HID_FEATURE_REPORT].report_list, list)
+		gb_hid_init_report(ghid, report);
+}
+
+static int __gb_hid_get_raw_report(struct hid_device *hid,
+		unsigned char report_number, __u8 *buf, size_t count,
+		unsigned char report_type)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	int ret;
+
+	if (report_type == HID_OUTPUT_REPORT)
+		return -EINVAL;
+
+	ret = gb_hid_get_report(ghid, report_type, report_number, buf, count);
+	if (!ret)
+		ret = count;
+
+	return ret;
+}
+
+static int __gb_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
+				      size_t len, unsigned char report_type)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	int report_id = buf[0];
+	int ret;
+
+	if (report_type == HID_INPUT_REPORT)
+		return -EINVAL;
+
+	if (report_id) {
+		buf++;
+		len--;
+	}
+
+	ret = gb_hid_set_report(ghid, report_type, report_id, buf, len);
+	if (report_id && ret >= 0)
+		ret++; /* add report_id to the number of transfered bytes */
+
+	return 0;
+}
+
+static int gb_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
+			       __u8 *buf, size_t len, unsigned char rtype,
+			       int reqtype)
+{
+	switch (reqtype) {
+	case HID_REQ_GET_REPORT:
+		return __gb_hid_get_raw_report(hid, reportnum, buf, len, rtype);
+	case HID_REQ_SET_REPORT:
+		if (buf[0] != reportnum)
+			return -EINVAL;
+		return __gb_hid_output_raw_report(hid, buf, len, rtype);
+	default:
+		return -EIO;
+	}
+}
+
+/* HID Callbacks */
+static int gb_hid_parse(struct hid_device *hid)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	unsigned int rsize;
+	char *rdesc;
+	int ret;
+
+	rsize = le16_to_cpu(ghid->hdesc.wReportDescLength);
+	if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
+		dbg_hid("weird size of report descriptor (%u)\n", rsize);
+		return -EINVAL;
+	}
+
+	rdesc = kzalloc(rsize, GFP_KERNEL);
+	if (!rdesc) {
+		dbg_hid("couldn't allocate rdesc memory\n");
+		return -ENOMEM;
+	}
+
+	ret = gb_hid_get_report_desc(ghid, rdesc);
+	if (ret) {
+		hid_err(hid, "reading report descriptor failed\n");
+		goto free_rdesc;
+	}
+
+	ret = hid_parse_report(hid, rdesc, rsize);
+	if (ret)
+		dbg_hid("parsing report descriptor failed\n");
+
+free_rdesc:
+	kfree(rdesc);
+
+	return ret;
+}
+
+static int gb_hid_start(struct hid_device *hid)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	unsigned int bufsize = HID_MIN_BUFFER_SIZE;
+	int ret;
+
+	gb_hid_find_max_report(hid, HID_INPUT_REPORT, &bufsize);
+	gb_hid_find_max_report(hid, HID_OUTPUT_REPORT, &bufsize);
+	gb_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);
+
+	if (bufsize > HID_MAX_BUFFER_SIZE)
+		bufsize = HID_MAX_BUFFER_SIZE;
+
+	ret = gb_hid_alloc_buffers(ghid, bufsize);
+	if (ret)
+		return ret;
+
+	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
+		gb_hid_init_reports(ghid);
+
+	return 0;
+}
+
+static void gb_hid_stop(struct hid_device *hid)
+{
+	struct gb_hid *ghid = hid->driver_data;
+
+	gb_hid_free_buffers(ghid);
+}
+
+static int gb_hid_open(struct hid_device *hid)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	int ret = 0;
+
+	mutex_lock(&gb_hid_open_mutex);
+	if (!hid->open++) {
+		ret = gb_hid_set_power(ghid, GB_HID_TYPE_PWR_ON);
+		if (ret < 0)
+			hid->open--;
+		else
+			set_bit(GB_HID_STARTED, &ghid->flags);
+	}
+	mutex_unlock(&gb_hid_open_mutex);
+
+	return ret;
+}
+
+static void gb_hid_close(struct hid_device *hid)
+{
+	struct gb_hid *ghid = hid->driver_data;
+	int ret;
+
+	/*
+	 * Protecting hid->open to make sure we don't restart data acquistion
+	 * due to a resumption we no longer care about..
+	 */
+	mutex_lock(&gb_hid_open_mutex);
+	if (!--hid->open) {
+		clear_bit(GB_HID_STARTED, &ghid->flags);
+
+		/* Save some power */
+		ret = gb_hid_set_power(ghid, GB_HID_TYPE_PWR_OFF);
+		if (ret)
+			dev_err(&ghid->connection->bundle->dev,
+				"failed to power off (%d)\n", ret);
+	}
+	mutex_unlock(&gb_hid_open_mutex);
+}
+
+static int gb_hid_power(struct hid_device *hid, int lvl)
+{
+	struct gb_hid *ghid = hid->driver_data;
+
+	switch (lvl) {
+	case PM_HINT_FULLON:
+		return gb_hid_set_power(ghid, GB_HID_TYPE_PWR_ON);
+	case PM_HINT_NORMAL:
+		return gb_hid_set_power(ghid, GB_HID_TYPE_PWR_OFF);
+	}
+
+	return 0;
+}
+
+/* HID structure to pass callbacks */
+static struct hid_ll_driver gb_hid_ll_driver = {
+	.parse = gb_hid_parse,
+	.start = gb_hid_start,
+	.stop = gb_hid_stop,
+	.open = gb_hid_open,
+	.close = gb_hid_close,
+	.power = gb_hid_power,
+	.raw_request = gb_hid_raw_request,
+};
+
+static int gb_hid_init(struct gb_hid *ghid)
+{
+	struct hid_device *hid = ghid->hid;
+	int ret;
+
+	ret = gb_hid_get_desc(ghid);
+	if (ret)
+		return ret;
+
+	hid->version = le16_to_cpu(ghid->hdesc.bcdHID);
+	hid->vendor = le16_to_cpu(ghid->hdesc.wVendorID);
+	hid->product = le16_to_cpu(ghid->hdesc.wProductID);
+	hid->country = ghid->hdesc.bCountryCode;
+
+	hid->driver_data = ghid;
+	hid->ll_driver = &gb_hid_ll_driver;
+	hid->dev.parent = &ghid->connection->bundle->dev;
+//	hid->bus = BUS_GREYBUS; /* Need a bustype for GREYBUS in <linux/input.h> */
+
+	/* Set HID device's name */
+	snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X",
+		 dev_name(&ghid->connection->bundle->dev),
+		 hid->vendor, hid->product);
+
+	return 0;
+}
+
+static int gb_hid_probe(struct gb_bundle *bundle,
+			const struct greybus_bundle_id *id)
+{
+	struct greybus_descriptor_cport *cport_desc;
+	struct gb_connection *connection;
+	struct hid_device *hid;
+	struct gb_hid *ghid;
+	int ret;
+
+	if (bundle->num_cports != 1)
+		return -ENODEV;
+
+	cport_desc = &bundle->cport_desc[0];
+	if (cport_desc->protocol_id != GREYBUS_PROTOCOL_HID)
+		return -ENODEV;
+
+	ghid = kzalloc(sizeof(*ghid), GFP_KERNEL);
+	if (!ghid)
+		return -ENOMEM;
+
+	connection = gb_connection_create(bundle, le16_to_cpu(cport_desc->id),
+						gb_hid_request_handler);
+	if (IS_ERR(connection)) {
+		ret = PTR_ERR(connection);
+		goto err_free_ghid;
+	}
+
+	gb_connection_set_data(connection, ghid);
+	ghid->connection = connection;
+
+	hid = hid_allocate_device();
+	if (IS_ERR(hid)) {
+		ret = PTR_ERR(hid);
+		goto err_connection_destroy;
+	}
+
+	ghid->hid = hid;
+	ghid->bundle = bundle;
+
+	greybus_set_drvdata(bundle, ghid);
+
+	ret = gb_connection_enable(connection);
+	if (ret)
+		goto err_destroy_hid;
+
+	ret = gb_hid_init(ghid);
+	if (ret)
+		goto err_connection_disable;
+
+	ret = hid_add_device(hid);
+	if (ret) {
+		hid_err(hid, "can't add hid device: %d\n", ret);
+		goto err_connection_disable;
+	}
+
+	gb_pm_runtime_put_autosuspend(bundle);
+
+	return 0;
+
+err_connection_disable:
+	gb_connection_disable(connection);
+err_destroy_hid:
+	hid_destroy_device(hid);
+err_connection_destroy:
+	gb_connection_destroy(connection);
+err_free_ghid:
+	kfree(ghid);
+
+	return ret;
+}
+
+static void gb_hid_disconnect(struct gb_bundle *bundle)
+{
+	struct gb_hid *ghid = greybus_get_drvdata(bundle);
+
+	if (gb_pm_runtime_get_sync(bundle))
+		gb_pm_runtime_get_noresume(bundle);
+
+	hid_destroy_device(ghid->hid);
+	gb_connection_disable(ghid->connection);
+	gb_connection_destroy(ghid->connection);
+	kfree(ghid);
+}
+
+static const struct greybus_bundle_id gb_hid_id_table[] = {
+	{ GREYBUS_DEVICE_CLASS(GREYBUS_CLASS_HID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(greybus, gb_hid_id_table);
+
+static struct greybus_driver gb_hid_driver = {
+	.name		= "hid",
+	.probe		= gb_hid_probe,
+	.disconnect	= gb_hid_disconnect,
+	.id_table	= gb_hid_id_table,
+};
+module_greybus_driver(gb_hid_driver);
+
+MODULE_LICENSE("GPL v2");

  parent reply	other threads:[~2016-09-16 14:10 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-14 10:09 [GIT PULL] Greybus driver subsystem for 4.9-rc1 Greg KH
2016-09-14 17:36 ` Mark Rutland
2016-09-14 18:07   ` Greg KH
2016-09-14 18:29     ` Greg KH
2016-09-14 19:05       ` Joe Perches
2016-09-15  9:35       ` Bryan O'Donoghue
2016-09-15 10:13         ` Mark Rutland
2016-09-15 10:35           ` Bryan O'Donoghue
2016-09-15 10:47             ` Bryan O'Donoghue
2016-09-15 11:20             ` Mark Rutland
2016-09-15 11:48               ` Bryan O'Donoghue
2016-09-15 12:46                 ` Mark Rutland
2016-09-15 15:40                   ` Bryan O'Donoghue
2016-09-15 15:47                     ` Mark Rutland
2016-09-15 16:09                       ` Bryan O'Donoghue
2016-09-14 20:07     ` Rob Herring
2016-09-15 10:17       ` Greg KH
2016-09-15 11:02         ` Bryan O'Donoghue
     [not found] ` <20160915122141.650632149@bubbles.kroah.org>
     [not found]   ` <20160915122234.640367870@bubbles.kroah.org>
2016-09-15 13:16     ` [patch 11/32] greybus: camera driver Laurent Pinchart
2016-09-15 14:45 ` [GIT PULL] Greybus driver subsystem for 4.9-rc1 Mark Brown
2016-09-16  6:05   ` Greg KH
2016-09-16 10:18     ` Mark Brown
2016-09-16 13:22       ` Greg KH
2016-09-16 14:24         ` Greg KH
2016-09-20  6:41           ` Greg KH
2016-09-20  7:12             ` Vaibhav Agarwal
2016-09-16 12:18     ` Arnd Bergmann
2016-09-21 13:02     ` Mark Rutland
2016-09-21 14:13       ` Greg KH
2016-09-16  6:40 ` [patch 00/32] Greybus driver subsystem Greg KH
2016-09-16  6:41   ` [patch 02/32] greybus: interface control logic Greg KH
2016-09-16 13:22   ` [patch 03/32] greybus: operations logic Greg KH
2016-09-16 13:23   ` [patch 04/32] greybus: host driver framework Greg KH
2016-09-16 13:23   ` [patch 05/32] greybus: trace.h Greg KH
2016-09-16 13:23   ` [patch 06/32] greybus: svc driver/watchdog Greg KH
2016-09-16 13:23   ` [patch 07/32] greybus: core code Greg KH
2016-09-16 13:24   ` [patch 08/32] greybus: bootrom driver Greg KH
2016-09-16 13:24   ` [patch 09/32] greybus: firmware download class driver Greg KH
2016-09-16 13:24   ` [patch 10/32] greybus: audio driver Greg KH
2016-09-16 13:25   ` [patch 11/32] greybus: camera driver Greg KH
2016-09-16 13:25   ` [patch 12/32] greybus: es2 host driver Greg KH
2016-10-07 13:43     ` Pavel Machek
2016-09-16 14:09   ` Greg KH [this message]
2016-09-16 14:10   ` [patch 14/32] greybus: LED driver Greg KH
2016-10-07 13:36     ` Pavel Machek
2016-10-07 13:41       ` Greg KH
2016-09-16 14:10   ` [patch 15/32] greybus: logging driver Greg KH
2016-09-16 14:10   ` [patch 16/32] greybus: loopback driver Greg KH
2016-09-16 14:10   ` [patch 17/32] greybus: power supply driver Greg KH
2016-10-07 13:49     ` Pavel Machek
2016-10-07 14:12       ` Greg KH
2016-10-07 18:15         ` Pavel Machek
2016-09-16 14:11   ` [patch 18/32] greybus: raw driver Greg KH
2016-09-16 14:11   ` [patch 19/32] greybus: timesync driver Greg KH
2016-09-16 14:11   ` [patch 20/32] greybus: vibrator driver Greg KH
2016-09-16 14:19   ` [patch 21/32] greybus: arche platform driver Greg KH
2016-09-16 14:20   ` [patch 22/32] greybus: bridged phy bus code Greg KH
2016-09-16 14:20   ` [patch 23/32] greybus: bridged phy gpio driver Greg KH
2016-09-16 14:20   ` [patch 24/32] greybus: bridged phy i2c driver Greg KH
2016-09-16 14:20   ` [patch 25/32] greybus: bridged phy pwm driver Greg KH
2016-09-16 14:21   ` [patch 26/32] greybus: bridged phy sdio driver Greg KH
2016-09-16 14:21   ` [patch 27/32] greybus: bridged phy spi driver Greg KH
2016-09-16 14:21   ` [patch 28/32] greybus: bridged phy uart driver Greg KH
2016-09-16 14:21   ` [patch 29/32] greybus: bridged phy usb driver Greg KH
2016-09-16 14:22   ` [patch 30/32] greybus: tools Greg KH
2016-09-16 14:22   ` [patch 31/32] greybus: documentation Greg KH
2016-09-16 14:22   ` [patch 32/32] greybus: add to the build Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160916140959.GA1252@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=arnd@arndb.de \
    --cc=dtwlin@google.com \
    --cc=elder@linaro.org \
    --cc=johan@hovoldconsulting.com \
    --cc=john.stultz@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mgreer@animalcreek.com \
    --cc=mporter@kernel.crashing.org \
    --cc=pure.logic@nexus-software.ie \
    --cc=rmfrfs@gmail.com \
    --cc=robh@kernel.org \
    --cc=sspatil@google.com \
    --cc=vaibhav.agarwal@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome