From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752576AbcISQNl (ORCPT <rfc822;w@1wt.eu>);
        Mon, 19 Sep 2016 12:13:41 -0400
Received: from anholt.net ([50.246.234.109]:32872 "EHLO anholt.net"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S1751729AbcISQNW (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 19 Sep 2016 12:13:22 -0400
From: Eric Anholt <eric@anholt.net>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Stephen Warren <swarren@wwwdotorg.org>, Lee Jones <lee@kernel.org>,
        bcm-kernel-feedback-list@broadcom.com,
        Alexandre Courbot <gnurou@gmail.com>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>, Gerd Hoffmann <kraxel@redhat.com>,
        Eric Anholt <eric@anholt.net>
Subject: [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.
Date: Mon, 19 Sep 2016 17:13:14 +0100
Message-Id: <20160919161314.25858-3-eric@anholt.net>
X-Mailer: git-send-email 2.9.3
In-Reply-To: <20160919161314.25858-1-eric@anholt.net>
References: <20160919161314.25858-1-eric@anholt.net>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This gets us hotplug detection of HDMI, so that graphics now works at
boot.  Tested with watching the output of xrandr while plugging and
unplugging the HDMI cable.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 7841b724e340..2460b47737e9 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -23,8 +23,25 @@
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	soc {
+		fxl6408: firmware-gpio-128 {
+			compatible = "raspberrypi,firmware-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			firmware = <&firmware>;
+			ngpios = <8>;
+			gpio-line-names = "BT_ON", "WL_ON", "", "LAN_RUN", "HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N";
+
+			raspberrypi,firmware-gpio-offset = <128>;
+		};
+	};
 };
 
 &uart1 {
 	status = "okay";
 };
+
+&hdmi {
+	hpd-gpios = <&fxl6408 4 GPIO_ACTIVE_HIGH>;
+};
-- 
2.9.3