From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753273AbcISRW0 (ORCPT ); Mon, 19 Sep 2016 13:22:26 -0400 Received: from dougal.metanate.com ([90.155.101.14]:20758 "EHLO metanate.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752769AbcISRSE (ORCPT ); Mon, 19 Sep 2016 13:18:04 -0400 From: John Keeping To: Mark Yao Cc: Heiko Stuebner , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, John Keeping Subject: [PATCH 13/26] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable Date: Mon, 19 Sep 2016 18:17:23 +0100 Message-Id: <20160919171747.28512-14-john@metanate.com> X-Mailer: git-send-email 2.10.0.278.g4f427b1.dirty In-Reply-To: <20160919171747.28512-1-john@metanate.com> References: <20160919171747.28512-1-john@metanate.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Panel drivers may want to sent commands during the disable function, for example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends. In order to send commands we need to write to registers, so pclk must be enabled. While changing this, remove the unnecessary code after the panel unprepare call which seems to be a workaround for a specific panel and thus belongs in the panel driver. Signed-off-by: John Keeping --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 9ff1cac5ef63..5e343b54f0d0 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -857,24 +857,16 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) { struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - drm_panel_disable(dsi->panel); - if (clk_prepare_enable(dsi->pclk)) { dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__); return; } + drm_panel_disable(dsi->panel); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); drm_panel_unprepare(dsi->panel); - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); - /* - * This is necessary to make sure the peripheral will be driven - * normally when the display is enabled again later. - */ - msleep(120); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); dw_mipi_dsi_disable(dsi); clk_disable_unprepare(dsi->pclk); } -- 2.10.0.278.g4f427b1.dirty