From: Wayne Porter <wporter82@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: rts5208: Fix indentation warnings
Date: Fri, 30 Sep 2016 19:06:37 +0000 [thread overview]
Message-ID: <20160930190637.GA925@jessie.raw> (raw)
[-- Attachment #1: Type: text/plain, Size: 3600 bytes --]
Fix code indentation warnings detected by checkpatch.pl
Signed-off-by: Wayne Porter <wporter82@gmail.com>
---
drivers/staging/rts5208/ms.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rts5208/ms.c b/drivers/staging/rts5208/ms.c
index 9fc64da..f27df0b 100644
--- a/drivers/staging/rts5208/ms.c
+++ b/drivers/staging/rts5208/ms.c
@@ -63,12 +63,12 @@ static int ms_transfer_tpc(struct rtsx_chip *chip, u8 trans_mode,
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE,
- 0x01, PINGPONG_BUFFER);
+ 0x01, PINGPONG_BUFFER);
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER,
- 0xFF, MS_TRANSFER_START | trans_mode);
+ 0xFF, MS_TRANSFER_START | trans_mode);
rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER,
- MS_TRANSFER_END, MS_TRANSFER_END);
+ MS_TRANSFER_END, MS_TRANSFER_END);
rtsx_add_cmd(chip, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
@@ -109,8 +109,8 @@ static int ms_transfer_tpc(struct rtsx_chip *chip, u8 trans_mode,
}
static int ms_transfer_data(struct rtsx_chip *chip, u8 trans_mode,
- u8 tpc, u16 sec_cnt, u8 cfg, bool mode_2k,
- int use_sg, void *buf, int buf_len)
+ u8 tpc, u16 sec_cnt, u8 cfg, bool mode_2k,
+ int use_sg, void *buf, int buf_len)
{
int retval;
u8 val, err_code = 0;
@@ -206,7 +206,7 @@ static int ms_write_bytes(struct rtsx_chip *chip,
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE,
- 0x01, PINGPONG_BUFFER);
+ 0x01, PINGPONG_BUFFER);
rtsx_add_cmd(chip, WRITE_REG_CMD,
MS_TRANSFER, 0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES);
@@ -253,7 +253,7 @@ static int ms_write_bytes(struct rtsx_chip *chip,
}
static int ms_read_bytes(struct rtsx_chip *chip,
- u8 tpc, u8 cnt, u8 cfg, u8 *data, int data_len)
+ u8 tpc, u8 cnt, u8 cfg, u8 *data, int data_len)
{
struct ms_info *ms_card = &chip->ms_card;
int retval, i;
@@ -270,12 +270,12 @@ static int ms_read_bytes(struct rtsx_chip *chip,
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
rtsx_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE,
- 0x01, PINGPONG_BUFFER);
+ 0x01, PINGPONG_BUFFER);
rtsx_add_cmd(chip, WRITE_REG_CMD, MS_TRANSFER, 0xFF,
- MS_TRANSFER_START | MS_TM_READ_BYTES);
+ MS_TRANSFER_START | MS_TM_READ_BYTES);
rtsx_add_cmd(chip, CHECK_REG_CMD, MS_TRANSFER,
- MS_TRANSFER_END, MS_TRANSFER_END);
+ MS_TRANSFER_END, MS_TRANSFER_END);
for (i = 0; i < data_len - 1; i++)
rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0);
@@ -284,7 +284,7 @@ static int ms_read_bytes(struct rtsx_chip *chip,
rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + data_len, 0, 0);
else
rtsx_add_cmd(chip, READ_REG_CMD, PPBUF_BASE2 + data_len - 1,
- 0, 0);
+ 0, 0);
retval = rtsx_send_cmd(chip, MS_CARD, 5000);
if (retval < 0) {
@@ -334,8 +334,8 @@ static int ms_read_bytes(struct rtsx_chip *chip,
return STATUS_SUCCESS;
}
-static int ms_set_rw_reg_addr(struct rtsx_chip *chip,
- u8 read_start, u8 read_cnt, u8 write_start, u8 write_cnt)
+static int ms_set_rw_reg_addr(struct rtsx_chip *chip, u8 read_start,
+ u8 read_cnt, u8 write_start, u8 write_cnt)
{
int retval, i;
u8 data[4];
--
2.1.4
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
reply other threads:[~2016-09-30 19:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160930190637.GA925@jessie.raw \
--to=wporter82@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome