From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>, Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-sunxi@googlegroups.com,
Andre Przywara <andre.przywara@arm.com>
Subject: [PATCH v3 0/9] arm64: Allwinner A64 support based on sunxi-ng
Date: Mon, 3 Oct 2016 10:09:04 +0200 [thread overview]
Message-ID: <20161003080913.24197-1-maxime.ripard@free-electrons.com> (raw)
Hi,
As it was in the first iteration, this is the A64 support based on the
new sunxi-ng clock framework.
The support for it is quite minimal at the moment, but it should be
fairly easy to add new devices, as most of the design is shared with
older SoCs.
Let me know what you think,
Maxime
Changes from v2:
- Added pull-ups on the Pine64 i2c bus
- Removed the PMU since it doesn't work
- Refactored the sunxi-ng framework to deal with the specifities of
the A64 CCU, especially in terms of minimum factors.
- Fixed a few things in the CCU driver: added CLK_SET_RATE PARENT
flags, fixed some mux width, etc.
- Converted the CCU driver to a platform driver
- Added the DRAM reset line
- Added IDs for the USB muxes (even though we're not using them yet)
Changes from v1:
- Split the A64 CCU support out of the H3 driver
- Added the PMU support
- Removed the clocks node
- Rebased on top of current sunxi/clk-for-4.9 branch
Andre Przywara (3):
arm64: dts: add Allwinner A64 SoC .dtsi
Documentation: devicetree: add vendor prefix for Pine64
arm64: dts: add Pine64 support
Maxime Ripard (6):
clk: sunxi-ng: Rename the internal structures
clk: sunxi-ng: Remove the use of rational computations
clk: sunxi-ng: Finish to convert to structures for arguments
clk: sunxi-ng: Add minimums for all the relevant structures and clocks
clk: sunxi-ng: Implement minimum for multipliers
clk: sunxi-ng: Add A64 clocks
Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 1 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/allwinner/Makefile | 5 +
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 ++
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 74 ++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 ++++++
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 918 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++
drivers/clk/sunxi-ng/ccu_div.h | 6 +-
drivers/clk/sunxi-ng/ccu_frac.c | 12 +-
drivers/clk/sunxi-ng/ccu_frac.h | 14 +-
drivers/clk/sunxi-ng/ccu_mp.h | 4 +-
drivers/clk/sunxi-ng/ccu_mult.c | 33 +-
drivers/clk/sunxi-ng/ccu_mult.h | 17 +-
drivers/clk/sunxi-ng/ccu_nk.c | 43 +-
drivers/clk/sunxi-ng/ccu_nk.h | 4 +-
drivers/clk/sunxi-ng/ccu_nkm.c | 45 +-
drivers/clk/sunxi-ng/ccu_nkm.h | 6 +-
drivers/clk/sunxi-ng/ccu_nkmp.c | 55 +-
drivers/clk/sunxi-ng/ccu_nkmp.h | 8 +-
drivers/clk/sunxi-ng/ccu_nm.c | 58 +-
drivers/clk/sunxi-ng/ccu_nm.h | 6 +-
include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++
include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++
29 files changed, 1824 insertions(+), 121 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
--
2.9.3
next reply other threads:[~2016-10-03 8:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-03 8:09 Maxime Ripard [this message]
2016-10-03 8:09 ` [PATCH v3 1/9] clk: sunxi-ng: Rename the internal structures Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 2/9] clk: sunxi-ng: Remove the use of rational computations Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 3/9] clk: sunxi-ng: Finish to convert to structures for arguments Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 4/9] clk: sunxi-ng: Add minimums for all the relevant structures and clocks Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 5/9] clk: sunxi-ng: Implement minimum for multipliers Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 6/9] clk: sunxi-ng: Add A64 clocks Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 7/9] arm64: dts: add Allwinner A64 SoC .dtsi Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 8/9] Documentation: devicetree: add vendor prefix for Pine64 Maxime Ripard
2016-10-03 8:09 ` [PATCH v3 9/9] arm64: dts: add Pine64 support Maxime Ripard
2016-10-03 10:24 ` Andre Przywara
2016-10-11 12:50 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161003080913.24197-1-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=andre.przywara@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®