From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To: Johannes Stezenbach <js@linuxtv.org>
Cc: "Jiri Kosina" <jikos@kernel.org>,
"Patrick Boettcher" <patrick.boettcher@posteo.de>,
"Jörg Otte" <jrg.otte@gmail.com>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Andy Lutomirski" <luto@kernel.org>,
"Michael Krufky" <mkrufky@linuxtv.org>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Linux Media Mailing List" <linux-media@vger.kernel.org>,
"Subject:Re:Problem"@s-opensource.com, with@s-opensource.com,
VMAP_STACK=y@s-opensource.com
Subject: Fw: [PATCH v2] cinergyT2-core: don't do DMA on stack
Date: Wed, 5 Oct 2016 15:58:05 -0300 [thread overview]
Message-ID: <20161005155805.27dc4d33@vento.lan> (raw)
Sorry, forgot to C/C people that are at the "Re: Problem with VMAP_STACK=y"
thread.
Forwarded message:
Date: Wed, 5 Oct 2016 15:54:18 -0300
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>, Mauro Carvalho Chehab <mchehab@infradead.org>, Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v2] cinergyT2-core: don't do DMA on stack
The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
Added the fixups made by Johannes Stezenbach
drivers/media/usb/dvb-usb/cinergyT2-core.c | 45 ++++++++++++++++++------------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 9fd1527494eb..8267e3777af6 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -41,6 +41,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
struct cinergyt2_state {
u8 rc_counter;
+ unsigned char data[64];
};
/* We are missing a release hook with usb_device data */
@@ -50,29 +51,36 @@ static struct dvb_usb_device_properties cinergyt2_properties;
static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
{
- char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
- char result[64];
- return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
- sizeof(result), 0);
+ struct dvb_usb_device *d = adap->dev;
+ struct cinergyt2_state *st = d->priv;
+
+ st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
+ st->data[1] = enable ? 1 : 0;
+
+ return dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
}
static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
{
- char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
- char state[3];
- return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
+ struct cinergyt2_state *st = d->priv;
+
+ st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
+ st->data[1] = enable ? 1 : 0;
+
+ return dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
}
static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
{
- char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
- char state[3];
+ struct dvb_usb_device *d = adap->dev;
+ struct cinergyt2_state *st = d->priv;
int ret;
adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
- ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
- sizeof(state), 0);
+ st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
+
+ ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
if (ret < 0) {
deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
"state info\n");
@@ -141,13 +149,14 @@ static int repeatable_keys[] = {
static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
struct cinergyt2_state *st = d->priv;
- u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
int i;
*state = REMOTE_NO_KEY_PRESSED;
- dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
- if (key[4] == 0xff) {
+ st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
+
+ dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+ if (st->data[4] == 0xff) {
/* key repeat */
st->rc_counter++;
if (st->rc_counter > RC_REPEAT_DELAY) {
@@ -166,13 +175,13 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
}
/* hack to pass checksum on the custom field */
- key[2] = ~key[1];
- dvb_usb_nec_rc_key_to_event(d, key, event, state);
- if (key[0] != 0) {
+ st->data[2] = ~st->data[1];
+ dvb_usb_nec_rc_key_to_event(d, st->data, event, state);
+ if (st->data[0] != 0) {
if (*event != d->last_event)
st->rc_counter = 0;
- deb_rc("key: %*ph\n", 5, key);
+ deb_rc("key: %*ph\n", 5, st->data);
}
return 0;
}
--
2.7.4
Thanks,
Mauro
next reply other threads:[~2016-10-05 18:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-05 18:58 Mauro Carvalho Chehab [this message]
2016-10-06 17:27 ` Andy Lutomirski
2016-10-06 18:29 ` Mauro Carvalho Chehab
2016-10-07 13:50 ` Jörg Otte
2016-10-07 17:30 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161005155805.27dc4d33@vento.lan \
--to=mchehab@s-opensource.com \
--cc="Subject:Re:Problem"@s-opensource.com \
--cc=VMAP_STACK=y@s-opensource.com \
--cc=jikos@kernel.org \
--cc=jrg.otte@gmail.com \
--cc=js@linuxtv.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mchehab@kernel.org \
--cc=mkrufky@linuxtv.org \
--cc=patrick.boettcher@posteo.de \
--cc=with@s-opensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome