[PATCH v2] hwmon: (adm1275) Enable adm1278 VOUT sampling

[Joel Stanley <joel@jms.id.au>]

From: Yi Li <adamliyi@msn.com>

The adm1278 can optionally monitor the VOUT pin. This functioanltiy is
not enabled at reset, so PMON_CONFIG needs to be modified in order to
enable it.

Signed-off-by: Yi Li <adamliyi@msn.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2:
 Return an error when unable to enable VOUT monitoring as suggestd by Guenter

 drivers/hwmon/pmbus/adm1275.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 3baa4f4a8c5e..9940849351a1 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -499,15 +499,27 @@ static int adm1275_probe(struct i2c_client *client,
 		pindex = 2;
 		tindex = 3;
 
-		info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
+		info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+		/* By default when reset VOUT is not enabled */
+		if (!(config & ADM1278_VOUT_EN)) {
+			config |= ADM1278_VOUT_EN;
+			ret = i2c_smbus_write_byte_data(client,
+							ADM1275_PMON_CONFIG,
+							config);
+			if (ret < 0) {
+				dev_err(&client->dev,
+					"Failed to enable VOUT monitoring\n");
+				return -ENODEV;
+			}
+		}
+
 		if (config & ADM1278_TEMP1_EN)
 			info->func[0] |=
 				PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 		if (config & ADM1278_VIN_EN)
 			info->func[0] |= PMBUS_HAVE_VIN;
-		if (config & ADM1278_VOUT_EN)
-			info->func[0] |=
-				PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 		break;
 	case adm1293:
 	case adm1294:
-- 
2.9.3