From: Axel Haslam <ahaslam@baylibre.com>
To: stern@rowland.harvard.edu, gregkh@linuxfoundation.org,
nsekhar@ti.com, khilman@kernel.org, david@lechnology.com,
robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Axel Haslam <ahaslam@baylibre.com>
Subject: [PATCH v3 06/10] USB: ohci: da8xx: Remove ohci platform callbacks
Date: Mon, 7 Nov 2016 21:39:44 +0100 [thread overview]
Message-ID: <20161107203948.28324-7-ahaslam@baylibre.com> (raw)
In-Reply-To: <20161107203948.28324-1-ahaslam@baylibre.com>
Now that all ohci users are are using a regulator, we can
remove the platform callbacks and data.
potpgt is no longer necessary as a power on delay time can
be specified for the regulator itself.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/usb-da8xx.c | 3 +-
drivers/usb/host/ohci-da8xx.c | 84 ++---------------------------
include/linux/platform_data/usb-davinci.h | 20 -------
6 files changed, 9 insertions(+), 104 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 16a401a..cb67885 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -129,7 +129,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("fail to add ohci regulator\n");
- ret = da8xx_register_usb11(NULL);
+ ret = da8xx_register_usb11();
if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
}
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index a252404..cbe7324 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -197,7 +197,7 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
- ret = da8xx_register_usb11(NULL);
+ ret = da8xx_register_usb11();
if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n",
__func__, ret);
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 43322be..6096402 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -91,7 +91,7 @@ int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
int da8xx_register_watchdog(void);
int da8xx_register_usb_phy(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
+int da8xx_register_usb11(void);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index c6feecf..4ea91bb 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -119,9 +119,8 @@ static struct platform_device da8xx_usb11_device = {
.resource = da8xx_usb11_resources,
};
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+int __init da8xx_register_usb11(void)
{
- da8xx_usb11_device.dev.platform_data = pdata;
return platform_device_register(&da8xx_usb11_device);
}
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 0a4b885..3dcbf1f 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -89,12 +89,8 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret;
- if (hub && hub->set_power)
- return hub->set_power(1, on);
-
if (!da8xx_ohci->vbus_reg)
return 0;
@@ -121,11 +117,6 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
static int ohci_da8xx_get_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->get_power)
- return hub->get_power(1);
if (da8xx_ohci->vbus_reg)
return regulator_is_enabled(da8xx_ohci->vbus_reg);
@@ -137,13 +128,9 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
unsigned int flags;
int ret;
- if (hub && hub->get_oci)
- return hub->get_oci(1);
-
if (!da8xx_ohci->vbus_reg)
return 0;
@@ -159,29 +146,9 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
return 0;
}
-static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+static int ohci_da8xx_has_regulator(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->set_power)
- return 1;
-
- if (da8xx_ohci->vbus_reg)
- return 1;
-
- return 0;
-}
-
-static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
-{
- struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->get_oci)
- return 1;
if (da8xx_ohci->vbus_reg)
return 1;
@@ -189,30 +156,9 @@ static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
return 0;
}
-static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
-{
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->potpgt)
- return 1;
-
- return 0;
-}
-
/*
* Handle the port over-current indicator change.
*/
-static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
- unsigned port)
-{
- ocic_mask |= 1 << port;
-
- /* Once over-current is detected, the port needs to be powered down */
- if (hub->get_oci(port) > 0)
- hub->set_power(port, 0);
-}
-
static int ohci_da8xx_regulator_event(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -233,12 +179,9 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret = 0;
- if (hub && hub->ocic_notify)
- ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
- else if (da8xx_ohci->vbus_reg) {
+ if (da8xx_ohci->vbus_reg) {
da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
&da8xx_ohci->nb);
@@ -250,19 +193,9 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
return ret;
}
-static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
-{
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->ocic_notify)
- hub->ocic_notify(NULL);
-}
-
static int ohci_da8xx_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int result;
u32 rh_a;
@@ -291,20 +224,14 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
* register's default value, so that ohci_hub_control() could return
* the correct hub descriptor...
*/
- rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
- if (ohci_da8xx_has_set_power(hcd)) {
+ if (ohci_da8xx_has_regulator(hcd)) {
+ rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
rh_a &= ~RH_A_NPS;
rh_a |= RH_A_PSM;
- }
- if (ohci_da8xx_has_oci(hcd)) {
rh_a &= ~RH_A_NOCP;
rh_a |= RH_A_OCPM;
+ ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
}
- if (ohci_da8xx_has_potpgt(hcd)) {
- rh_a &= ~RH_A_POTPGT;
- rh_a |= hub->potpgt << 24;
- }
- ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
return result;
}
@@ -479,7 +406,6 @@ static int ohci_da8xx_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- ohci_da8xx_unregister_notify(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h
index 0926e99..58f4be0 100644
--- a/include/linux/platform_data/usb-davinci.h
+++ b/include/linux/platform_data/usb-davinci.h
@@ -11,26 +11,6 @@
#ifndef __ASM_ARCH_USB_H
#define __ASM_ARCH_USB_H
-struct da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
- unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct da8xx_ohci_root_hub {
- /* Switch the port power on/off */
- int (*set_power)(unsigned port, int on);
- /* Read the port power status */
- int (*get_power)(unsigned port);
- /* Read the port over-current indicator */
- int (*get_oci)(unsigned port);
- /* Over-current indicator change notification (pass NULL to disable) */
- int (*ocic_notify)(da8xx_ocic_handler_t handler);
-
- /* Time from power on to power good (in 2 ms units) */
- u8 potpgt;
-};
-
void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
#endif /* ifndef __ASM_ARCH_USB_H */
--
2.10.1
next prev parent reply other threads:[~2016-11-07 20:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 20:39 [PATCH v3 00/10] Add DT support for ohci-da8xx Axel Haslam
2016-11-07 20:39 ` [PATCH v3 01/10] USB: ohci: da8xx: use ohci priv data instead of globals Axel Haslam
2016-11-07 20:39 ` [PATCH v3 02/10] USB: ohci: da8xx: Prepare to remove platform callbacks Axel Haslam
2016-11-07 20:39 ` [PATCH v3 03/10] USB: ohci: da8xx: Allow a regulator to handle VBUS Axel Haslam
2016-11-07 20:39 ` [PATCH v3 04/10] ARM: davinci: da830: Handle vbus with a regulator Axel Haslam
2016-11-07 20:39 ` [PATCH v3 05/10] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam
2016-11-07 20:39 ` Axel Haslam [this message]
2016-11-07 20:39 ` [PATCH v3 07/10] USB: ohci: da8xx: use a flag instead of mask for ocic Axel Haslam
2016-11-07 20:39 ` [PATCH v3 08/10] USB: ohci: da8xx: Add devicetree bindings Axel Haslam
2016-11-07 20:39 ` [PATCH v3 09/10] USB: ohci: da8xx: Allow probing from DT Axel Haslam
2016-11-07 20:39 ` [PATCH v3 10/10] ARM: dts: da850: add usb device node Axel Haslam
2016-11-21 2:42 ` David Lechner
2016-11-21 10:27 ` Axel Haslam
2016-11-21 10:46 ` Sekhar Nori
2016-11-21 10:49 ` Sekhar Nori
2016-11-21 10:53 ` Axel Haslam
2016-11-08 16:37 ` [PATCH v3 00/10] Add DT support for ohci-da8xx Axel Haslam
2016-11-10 12:02 ` Greg KH
2016-11-10 17:28 ` Axel Haslam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161107203948.28324-7-ahaslam@baylibre.com \
--to=ahaslam@baylibre.com \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome