mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Alexandre Courbot <acourbot@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>,
	David Airlie <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org, gnurou@gmail.com
Subject: Re: [PATCH] drm/tegra: add tiling FB modifiers
Date: Tue, 8 Nov 2016 11:34:34 +0100	[thread overview]
Message-ID: <20161108103433.2p7coxozp23gcqeb@phenom.ffwll.local> (raw)
In-Reply-To: <20161108075042.13357-1-acourbot@nvidia.com>

On Tue, Nov 08, 2016 at 04:50:42PM +0900, Alexandre Courbot wrote:
> Add FB modifiers to allow user-space to specify that a surface is in one
> of the two tiling formats supported by Tegra chips, and add support in
> the tegradrm driver to handle them properly. This is necessary for the
> display controller to directly display buffers generated by the GPU.
> 
> This feature is intended to replace the dedicated IOCTL enabled
> by TEGRA_STAGING and to provide a non-staging alternative to that
> solution.
> 
> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Ack on the drm_fourcc.h part, I think that's the amount of detail in
comments that's reasonable. Feel free to merge through tegra trees.
-Daniel

> ---
>  drivers/gpu/drm/tegra/drm.c   |  2 ++
>  drivers/gpu/drm/tegra/fb.c    | 23 +++++++++++++++++++---
>  include/uapi/drm/drm_fourcc.h | 45 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 67 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
> index a9630c2d6cb3..36b4b30a5164 100644
> --- a/drivers/gpu/drm/tegra/drm.c
> +++ b/drivers/gpu/drm/tegra/drm.c
> @@ -161,6 +161,8 @@ static int tegra_drm_load(struct drm_device *drm, unsigned long flags)
>  	drm->mode_config.max_width = 4096;
>  	drm->mode_config.max_height = 4096;
>  
> +	drm->mode_config.allow_fb_modifiers = true;
> +
>  	drm->mode_config.funcs = &tegra_drm_mode_funcs;
>  
>  	err = tegra_drm_fb_prepare(drm);
> diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
> index e6d71fa4028e..2fded58b2ca5 100644
> --- a/drivers/gpu/drm/tegra/fb.c
> +++ b/drivers/gpu/drm/tegra/fb.c
> @@ -52,9 +52,26 @@ int tegra_fb_get_tiling(struct drm_framebuffer *framebuffer,
>  			struct tegra_bo_tiling *tiling)
>  {
>  	struct tegra_fb *fb = to_tegra_fb(framebuffer);
> -
> -	/* TODO: handle YUV formats? */
> -	*tiling = fb->planes[0]->tiling;
> +	uint64_t modifier = fb->base.modifier[0];
> +
> +	switch (fourcc_mod_tegra_mod(modifier)) {
> +	case NV_FORMAT_MOD_TEGRA_TILED:
> +		tiling->mode = TEGRA_BO_TILING_MODE_TILED;
> +		tiling->value = 0;
> +		break;
> +
> +	case NV_FORMAT_MOD_TEGRA_16BX2_BLOCK(0):
> +		tiling->mode = TEGRA_BO_TILING_MODE_BLOCK;
> +		tiling->value = fourcc_mod_tegra_param(modifier);
> +		if (tiling->value > 5)
> +			return -EINVAL;
> +		break;
> +
> +	default:
> +		/* TODO: handle YUV formats? */
> +		*tiling = fb->planes[0]->tiling;
> +		break;
> +	}
>  
>  	return 0;
>  }
> diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> index a5890bf44c0a..967dfab16881 100644
> --- a/include/uapi/drm/drm_fourcc.h
> +++ b/include/uapi/drm/drm_fourcc.h
> @@ -233,6 +233,51 @@ extern "C" {
>   */
>  #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE	fourcc_mod_code(SAMSUNG, 1)
>  
> +
> +/* NVIDIA Tegra frame buffer modifiers */
> +
> +/*
> + * Some modifiers take parameters, for example the number of vertical GOBs in
> + * a block. Reserve the lower 32 bits for parameters
> + */
> +#define __fourcc_mod_tegra_mode_shift 32
> +#define fourcc_mod_tegra_code(val, params) \
> +	fourcc_mod_code(NV, ((((__u64)val) << __fourcc_mod_tegra_mode_shift) | params))
> +#define fourcc_mod_tegra_mod(m) \
> +	(m & ~((1ULL << __fourcc_mod_tegra_mode_shift) - 1))
> +#define fourcc_mod_tegra_param(m) \
> +	(m & ((1ULL << __fourcc_mod_tegra_mode_shift) - 1))
> +
> +/*
> + * Tegra Tiled Layout, used by Tegra 2, 3 and 4.
> + *
> + * Pixels are arranged in simple tiles of 16 x 16 bytes.
> + */
> +#define NV_FORMAT_MOD_TEGRA_TILED fourcc_mod_tegra_code(1, 0)
> +
> +/*
> + * Tegra 16Bx2 Block Linear layout, used by TK1/TX1
> + *
> + * Pixels are arranged in 64x8 Groups Of Bytes (GOBs). GOBs are then stacked
> + * vertically by a power of 2 (1 to 32 GOBs) to form a block.
> + *
> + * Within a GOB, data is ordered as 16B x 2 lines sectors laid in Z-shape.
> + *
> + * Parameter 'v' is the log2 encoding of the number of GOBs stacked vertically.
> + * Valid values are:
> + *
> + * 0 == ONE_GOB
> + * 1 == TWO_GOBS
> + * 2 == FOUR_GOBS
> + * 3 == EIGHT_GOBS
> + * 4 == SIXTEEN_GOBS
> + * 5 == THIRTYTWO_GOBS
> + *
> + * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format
> + * in full detail.
> + */
> +#define NV_FORMAT_MOD_TEGRA_16BX2_BLOCK(v) fourcc_mod_tegra_code(2, v)
> +
>  #if defined(__cplusplus)
>  }
>  #endif
> -- 
> 2.10.2
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

  parent reply	other threads:[~2016-11-08 11:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-08  7:50 Alexandre Courbot
2016-11-08  9:07 ` Erik Faye-Lund
2016-11-08  9:19   ` Alexandre Courbot
2017-03-20 17:26     ` Thierry Reding
2016-11-08 10:34 ` Daniel Vetter [this message]
2017-03-20 17:26 ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161108103433.2p7coxozp23gcqeb@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=acourbot@nvidia.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gnurou@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome