From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756876AbcKKRjf (ORCPT ); Fri, 11 Nov 2016 12:39:35 -0500 Received: from anholt.net ([50.246.234.109]:43552 "EHLO anholt.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755503AbcKKRjc (ORCPT ); Fri, 11 Nov 2016 12:39:32 -0500 From: Eric Anholt To: Rob Herring Cc: linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stephen Warren , Lee Jones , bcm-kernel-feedback-list@broadcom.com, Mark Rutland , Catalin Marinas , Will Deacon , Andrea Merello , Eric Anholt Subject: [PATCH] ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED Date: Fri, 11 Nov 2016 09:38:21 -0800 Message-Id: <20161111173821.21491-1-eric@anholt.net> X-Mailer: git-send-email 2.10.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Andrea Merello We are incorrectly defining the pwr LED, attaching it to a gpio line that is wired to the Wi-Fi SDIO module (which fails due to this). The actual power LED is connected to the GPIO expander, which we don't expose currently. Thanks-to: Eric Anholt [for clarifying we can't control the LED] Signed-off-by: Andrea Merello Signed-off-by: Eric Anholt --- arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index 7625e57a64b5..c309633a1e87 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -16,13 +16,6 @@ act { gpios = <&gpio 47 0>; }; - - pwr { - label = "PWR"; - gpios = <&gpio 35 0>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; }; }; -- 2.10.2