From: Benoit Parrot <bparrot@ti.com>
To: <linux-media@vger.kernel.org>, Hans Verkuil <hverkuil@xs4all.nl>
Cc: <linux-kernel@vger.kernel.org>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Jyri Sarha <jsarha@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Benoit Parrot <bparrot@ti.com>
Subject: [Patch v2 28/35] media: ti-vpe: vpe: Enable DMABUF export
Date: Fri, 18 Nov 2016 17:20:38 -0600 [thread overview]
Message-ID: <20161118232045.24665-29-bparrot@ti.com> (raw)
In-Reply-To: <20161118232045.24665-1-bparrot@ti.com>
Allow VPE to be able to export DMA buffer.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/platform/ti-vpe/vpe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 608d11344147..1d780ac7ff82 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1944,6 +1944,7 @@ static const struct v4l2_ioctl_ops vpe_ioctl_ops = {
.vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
.vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
.vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
.vidioc_streamon = v4l2_m2m_ioctl_streamon,
.vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
--
2.9.0
next prev parent reply other threads:[~2016-11-18 23:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 23:20 [Patch v2 00/35] media: ti-vpe: fixes and enhancements Benoit Parrot
2016-11-18 23:20 ` [Patch v2 01/35] media: ti-vpe: vpdma: Make vpdma library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 02/35] media: ti-vpe: vpdma: Add multi-instance and multi-client support Benoit Parrot
2016-11-18 23:20 ` [Patch v2 03/35] media: ti-vpe: vpdma: Add helper to set a background color Benoit Parrot
2016-11-18 23:20 ` [Patch v2 04/35] media: ti-vpe: vpdma: Fix bus error when vpdma is writing a descriptor Benoit Parrot
2016-11-18 23:20 ` [Patch v2 05/35] media: ti-vpe: Use line average de-interlacing for first 2 frames Benoit Parrot
2016-11-18 23:20 ` [Patch v2 06/35] media: ti-vpe: vpe: Do not perform job transaction atomically Benoit Parrot
2016-11-18 23:20 ` [Patch v2 07/35] media: ti-vpe: Add support for SEQ_TB buffers Benoit Parrot
2016-11-18 23:20 ` [Patch v2 08/35] media: ti-vpe: Increasing max buffer height and width Benoit Parrot
2016-11-18 23:20 ` [Patch v2 09/35] media: ti-vpe: vpe: Return NULL for invalid buffer type Benoit Parrot
2016-11-18 23:20 ` [Patch v2 10/35] media: ti-vpe: Free vpdma buffers in vpe_release Benoit Parrot
2016-11-18 23:20 ` [Patch v2 11/35] media: ti-vpe: vpdma: Add support for setting max width height Benoit Parrot
2016-11-18 23:20 ` [Patch v2 12/35] media: ti-vpe: vpdma: Add abort channel desc and cleanup APIs Benoit Parrot
2016-11-18 23:20 ` [Patch v2 13/35] media: ti-vpe: vpdma: Make list post atomic operation Benoit Parrot
2016-11-18 23:20 ` [Patch v2 14/35] media: ti-vpe: vpdma: Clear IRQs for individual lists Benoit Parrot
2016-11-18 23:20 ` [Patch v2 15/35] media: ti-vpe: vpe: configure line mode separately Benoit Parrot
2016-11-18 23:20 ` [Patch v2 16/35] media: ti-vpe: vpe: Setup srcdst parameters in start_streaming Benoit Parrot
2016-11-18 23:20 ` [Patch v2 17/35] media: ti-vpe: vpe: Post next descriptor only for list complete IRQ Benoit Parrot
2016-11-18 23:20 ` [Patch v2 18/35] media: ti-vpe: vpe: Add RGB565 and RGB5551 support Benoit Parrot
2016-11-18 23:20 ` [Patch v2 19/35] media: ti-vpe: vpdma: allocate and maintain hwlist Benoit Parrot
2016-11-18 23:20 ` [Patch v2 20/35] media: ti-vpe: vpe: Added MODULE_DEVICE_TABLE hint Benoit Parrot
2016-11-18 23:20 ` [Patch v2 21/35] media: ti-vpe: vpdma: Corrected YUV422 data type label Benoit Parrot
2016-11-18 23:20 ` [Patch v2 22/35] media: ti-vpe: vpdma: RGB data type yield inverted data Benoit Parrot
2016-11-18 23:20 ` [Patch v2 23/35] media: ti-vpe: sc: Fix incorrect optimization Benoit Parrot
2016-11-18 23:20 ` [Patch v2 24/35] media: ti-vpe: vpe: Fix vb2 buffer cleanup Benoit Parrot
2016-11-18 23:20 ` [Patch v2 25/35] media: ti-vpe: vpdma: Fix race condition for firmware loading Benoit Parrot
2016-11-18 23:20 ` [Patch v2 26/35] media: ti-vpe: vpdma: Use bidirectional cached buffers Benoit Parrot
2016-11-18 23:20 ` [Patch v2 27/35] media: ti-vpe: vpe: Fix line stride for output motion vector Benoit Parrot
2016-11-18 23:20 ` Benoit Parrot [this message]
2016-11-18 23:20 ` [Patch v2 29/35] media: ti-vpe: Make scaler library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 30/35] media: ti-vpe: scaler: Add debug support for multi-instance Benoit Parrot
2016-11-18 23:20 ` [Patch v2 31/35] media: ti-vpe: vpe: Make sure frame size dont exceed scaler capacity Benoit Parrot
2016-11-18 23:20 ` [Patch v2 32/35] media: ti-vpe: vpdma: Add RAW8 and RAW16 data types Benoit Parrot
2016-11-18 23:20 ` [Patch v2 33/35] media: ti-vpe: Make colorspace converter library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 34/35] media: ti-vpe: csc: Add debug support for multi-instance Benoit Parrot
2016-11-18 23:20 ` [Patch v2 35/35] media: ti-vpe: vpe: Add proper support single and multi-plane buffer Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161118232045.24665-29-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=hverkuil@xs4all.nl \
--cc=jsarha@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®