From: Takashi Iwai <tiwai@suse.de>
To: Minchan Kim <minchan@kernel.org>, Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
David Disseldorp <ddiss@suse.de>,
linux-kernel@vger.kernel.org
Subject: [PATCH] zram: Fix unbalanced idr management at hot removal
Date: Mon, 21 Nov 2016 14:21:40 +0100 [thread overview]
Message-ID: <20161121132140.12683-1-tiwai@suse.de> (raw)
The zram hot removal code calls idr_remove() even when zram_remove()
returns an error (typically -EBUSY). This results in a leftover at
the device release, eventually leading to a crash when the module is
reloaded.
As described in the bug report below, the following procedure would
cause an Oops with zram:
- provision three zram devices via modprobe zram num_devices=3
- configure a size for each device
+ echo "1G" > /sys/block/$zram_name/disksize
- mkfs and mount zram0 only
- attempt to hot remove all three devices
+ echo 2 > /sys/class/zram-control/hot_remove
+ echo 1 > /sys/class/zram-control/hot_remove
+ echo 0 > /sys/class/zram-control/hot_remove
- zram0 removal fails with EBUSY, as expected
- unmount zram0
- try zram0 hot remove again
+ echo 0 > /sys/class/zram-control/hot_remove
- fails with ENODEV (unexpected)
- unload zram kernel module
+ completes successfully
- zram0 device node still exists
- attempt to mount /dev/zram0
+ mount command is killed
+ following BUG is encountered
BUG: unable to handle kernel paging request at ffffffffa0002ba0
IP: [<ffffffff812eead6>] get_disk+0x16/0x50
Oops: 0000 [#1] SMP
CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176
task: ffff88001a9f2800 task.stack: ffffc90000300000
RIP: 0010:[<ffffffff812eead6>] [<ffffffff812eead6>] get_disk+0x16/0x50
Call Trace:
[<ffffffff812eeb1c>] exact_lock+0xc/0x20
[<ffffffff813b3e1c>] kobj_lookup+0xdc/0x160
[<ffffffff812edce0>] ? disk_map_sector_rcu+0x70/0x70
[<ffffffff81127410>] ? blkdev_get_by_dev+0x50/0x50
[<ffffffff812eef4f>] get_gendisk+0x2f/0x110
[<ffffffff81127410>] ? blkdev_get_by_dev+0x50/0x50
[<ffffffff81126e2c>] __blkdev_get+0x10c/0x3c0
[<ffffffff81127410>] ? blkdev_get_by_dev+0x50/0x50
[<ffffffff8112727d>] blkdev_get+0x19d/0x2e0
[<ffffffff81127410>] ? blkdev_get_by_dev+0x50/0x50
[<ffffffff81127466>] blkdev_open+0x56/0x70
[<ffffffff810f3e0f>] do_dentry_open.isra.19+0x1ff/0x310
[<ffffffff810f4aa3>] vfs_open+0x43/0x60
[<ffffffff81103009>] path_openat+0x2c9/0xf30
[<ffffffff81023c00>] ? __save_stack_trace+0x40/0xd0
[<ffffffff81104b79>] do_filp_open+0x79/0xd0
[<ffffffff81538219>] ? kmemleak_alloc+0x49/0xa0
[<ffffffff810f4e44>] do_sys_open+0x114/0x1e0
[<ffffffff810f4f29>] SyS_open+0x19/0x20
[<ffffffff8153c2e0>] entry_SYSCALL_64_fastpath+0x13/0x94
This patch adds the proper error check in hot_remove_store() not to
call idr_remove() unconditionally.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970
Reported-and-tested-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
drivers/block/zram/zram_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 04365b17ee67..5163c8f918cb 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1403,7 +1403,8 @@ static ssize_t hot_remove_store(struct class *class,
zram = idr_find(&zram_index_idr, dev_id);
if (zram) {
ret = zram_remove(zram);
- idr_remove(&zram_index_idr, dev_id);
+ if (!ret)
+ idr_remove(&zram_index_idr, dev_id);
} else {
ret = -ENODEV;
}
--
2.10.2
next reply other threads:[~2016-11-21 13:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 13:21 Takashi Iwai [this message]
2016-11-21 13:48 ` Takashi Iwai
2016-11-22 0:11 ` Minchan Kim
2016-11-22 1:09 ` Sergey Senozhatsky
2016-11-22 1:22 ` Minchan Kim
2016-11-22 1:28 ` Sergey Senozhatsky
2016-11-22 1:33 ` Minchan Kim
2016-11-22 1:39 ` Sergey Senozhatsky
2016-11-22 5:52 ` Takashi Iwai
2016-11-22 6:39 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121132140.12683-1-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=ddiss@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
--cc=sergey.senozhatsky.work@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®