From: Wim Osterholt <wim@djo.tudelft.nl>
To: Oliver Neukum <oneukum@suse.com>
Cc: poma <pomidorabelisima@gmail.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
Wim Osterholt <wim@djo.tudelft.nl>
Subject: Re: crash by cdc_acm driver in kernels 4.8-rc1/5
Date: Mon, 21 Nov 2016 16:58:25 +0100 [thread overview]
Message-ID: <20161121155825.GA29918@djo.tudelft.nl> (raw)
In-Reply-To: <1479734372.2332.1.camel@suse.com>
On Mon, Nov 21, 2016 at 02:19:32PM +0100, Oliver Neukum wrote:
> On Thu, 2016-11-17 at 17:11 +0100, Wim Osterholt wrote:
>
> > Nov 17 15:07:51 localhost kernel: Check point 10
> > Nov 17 15:07:51 localhost kernel: BUG: unable to handle kernel NULL pointer dereference at 00000249
> > Nov 17 15:07:51 localhost kernel: IP: [<e186ece2>] acm_probe+0x559/0xe53 [cdc_acm]
> > Nov 17 15:07:51 localhost kernel: *pde = 00000000
> > Nov 17 15:07:51 localhost kernel: Oops: 0000 [#1] SMP
>
> I don't understand it, bit please test the attached patch
> with dynamic debugging for cdc-acm and the kernel log level
> at maximum. And please repost "lsusb -v" for your device.
I didn't find traces of kernel-4.9-rc5 being ran on any of my laptops, so I
can't have seen a crash on rc5. It seems rc5 and rc6 is safe now.
I assume you want this on a crashing kernel, but I already removed the
sources. (Lack of space).
4.8.10 is now compiling, that was the fastest option. If that one doesn't
crash anymore I'll dig up 4.8.8 again.
lsusb -v:
Bus 004 Device 002: ID 0572:1340 Conexant Systems (Rockwell), Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0572 Conexant Systems (Rockwell), Inc.
idProduct 0x1340
bcdDevice 1.00
iManufacturer 1 Conexant
iProduct 2 USB Modem
iSerial 3 12345678
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 73
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 128
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x07
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Country Selection:
iCountryCodeRelDate 4 04052004
wCountryCode 0x4803
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 96
bNumInterfaces 3
bConfigurationValue 2
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 128
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x07
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Country Selection:
iCountryCodeRelDate 4 04052004
wCountryCode 0x4803
Device Status: 0x0000
(Bus Powered)
next prev parent reply other threads:[~2016-11-21 15:58 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 11:58 Wim Osterholt
2016-09-08 12:20 ` Oliver Neukum
2016-09-08 12:58 ` Wim Osterholt
2016-09-08 13:05 ` Oliver Neukum
2016-09-08 15:00 ` Wim Osterholt
2016-09-08 16:54 ` Wim Osterholt
2016-09-09 13:24 ` Wim Osterholt
2016-09-12 2:43 ` Wim Osterholt
2016-09-20 13:05 ` Oliver Neukum
2016-09-20 15:45 ` Wim Osterholt
2016-09-21 12:21 ` Oliver Neukum
2016-09-21 16:21 ` Wim Osterholt
2016-09-21 16:41 ` Wim Osterholt
2016-09-22 14:40 ` Oliver Neukum
2016-09-22 17:56 ` Wim Osterholt
2016-09-22 19:21 ` Wim Osterholt
2016-09-23 10:04 ` Wim Osterholt
2016-09-27 16:34 ` Wim Osterholt
2016-09-28 9:16 ` Oliver Neukum
2016-09-28 14:46 ` Wim Osterholt
2016-09-28 15:08 ` Wim Osterholt
2016-09-28 15:23 ` Oliver Neukum
2016-09-29 13:26 ` Wim Osterholt
2016-10-06 10:53 ` Oliver Neukum
2016-10-17 14:10 ` Oliver Neukum
2016-10-17 15:20 ` Wim Osterholt
2016-10-18 12:18 ` Oliver Neukum
2016-10-18 14:51 ` Wim Osterholt
2016-11-05 13:34 ` Wim Osterholt
2016-11-15 0:16 ` Wim Osterholt
2016-11-15 11:07 ` Oliver Neukum
2016-11-15 11:26 ` poma
2016-11-15 13:29 ` Wim Osterholt
2016-11-16 12:34 ` Oliver Neukum
2016-11-16 15:07 ` Wim Osterholt
2016-11-17 1:57 ` Wim Osterholt
2016-11-17 9:14 ` Wim Osterholt
2016-11-17 16:11 ` Wim Osterholt
2016-11-21 13:19 ` Oliver Neukum
2016-11-21 15:58 ` Wim Osterholt [this message]
2016-11-21 20:23 ` Wim Osterholt
2016-11-21 23:49 ` poma
2016-11-22 17:50 ` Bjørn Mork
2016-11-23 0:48 ` Wim Osterholt
2016-11-22 15:38 ` Wim Osterholt
2016-11-22 18:08 ` Bjørn Mork
2016-11-23 0:54 ` Wim Osterholt
2016-11-23 7:37 ` Bjørn Mork
2016-11-23 15:02 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121155825.GA29918@djo.tudelft.nl \
--to=wim@djo.tudelft.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=pomidorabelisima@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®