mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Mugunthan V N <mugunthanvnm@ti.com>,
	Richard Cochran <richardcochran@gmail.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	<devicetree@vger.kernel.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Wingman Kwok <w-kwok2@ti.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 5/6] ARM: keystone: dts: fix netcp clocks and add names
Date: Mon, 28 Nov 2016 17:04:27 -0600	[thread overview]
Message-ID: <20161128230428.6872-6-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20161128230428.6872-1-grygorii.strashko@ti.com>

From: Murali Karicheri <m-karicheri2@ti.com>

Fix the pa clock to point to the clkpa which has clock rate of 1/3 of PA
PLL clock and add clock names.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/keystone-k2e-netcp.dtsi  | 3 ++-
 arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 3 ++-
 arch/arm/boot/dts/keystone-k2l-netcp.dtsi  | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ac990f6..ba828cb 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -138,7 +138,8 @@ netcp: netcp@24000000 {
 	/* NetCP address range */
 	ranges = <0 0x24000000 0x1000000>;
 
-	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+	clock-names = "pa_clk", "ethss_clk", "cpts";
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index f86d6dd..a5ac845 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -155,7 +155,8 @@ netcp: netcp@2000000 {
 	/* NetCP address range */
 	ranges  = <0 0x2000000 0x100000>;
 
-	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+	clock-names = "pa_clk", "ethss_clk", "cpts";
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 22>,
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 5acbd0d..b6f2682 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -137,7 +137,8 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;
 
-	clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
+	clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,
-- 
2.10.1

  parent reply	other threads:[~2016-11-28 23:05 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-28 23:04 [PATCH 0/6] net: ethernet: ti: cpts: update and enable support on keystone 2 socs Grygorii Strashko
2016-11-28 23:04 ` [PATCH 1/6] net: ethernet: ti: netcp: add support of cpts Grygorii Strashko
2016-11-30  9:44   ` Richard Cochran
2016-11-30 17:31     ` Grygorii Strashko
2016-11-30 18:22       ` Richard Cochran
2016-12-05 14:49   ` Rob Herring
2016-12-05 18:25     ` Grygorii Strashko
2016-12-05 19:30       ` Richard Cochran
2016-11-28 23:04 ` [PATCH 2/6] net: ethernet: ti: cpts: add support for ext rftclk selection Grygorii Strashko
2016-11-30  9:56   ` Richard Cochran
2016-11-30 17:35     ` Grygorii Strashko
2016-12-06 19:39       ` Grygorii Strashko
2016-12-06 20:25         ` Richard Cochran
2016-12-06 20:40           ` Grygorii Strashko
2016-12-09  0:47         ` Stephen Boyd
2016-12-09 23:29           ` Grygorii Strashko
2016-12-05 14:51   ` Rob Herring
2016-11-28 23:04 ` [PATCH 3/6] net: ethernet: ti: cpts: add support of cpts HW_TS_PUSH Grygorii Strashko
2016-11-30 10:19   ` Richard Cochran
2016-11-30 11:08   ` Jan Lübbe
2016-11-30 20:15     ` Grygorii Strashko
2016-12-03 23:21   ` Richard Cochran
2016-12-08 19:04     ` Grygorii Strashko
2016-12-09  8:50       ` Richard Cochran
2016-11-28 23:04 ` [PATCH 4/6] net: ethernet: ti: cpts: add ptp pps support Grygorii Strashko
2016-11-30 10:05   ` Richard Cochran
2016-12-06 18:08     ` Richard Cochran
2016-12-06 20:43       ` Grygorii Strashko
2016-11-30 11:01   ` Jan Lübbe
2016-11-30 18:45   ` Richard Cochran
2016-11-30 20:43     ` Grygorii Strashko
2016-11-30 22:17       ` Richard Cochran
2016-12-02  9:58         ` Richard Cochran
2016-12-02 17:58           ` Grygorii Strashko
2016-12-02 19:28             ` Richard Cochran
2016-11-28 23:04 ` Grygorii Strashko [this message]
2016-11-28 23:04 ` [PATCH 6/6] ARM: dts: keystone: enable time synchronization (cpts) submodule Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161128230428.6872-6-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=w-kwok2@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome