Re: [PATCHv2] mfd: cpcap: Add minimal support

[Tony Lindgren <tony@atomide.com>]

* Tony Lindgren <tony@atomide.com> [161129 08:48]:
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
> @@ -0,0 +1,31 @@
> +Motorola CPCAP PMIC device tree binding
> +
> +Required properties:
> +- compatible		: One or both of "motorola,cpcap" or "ste,6556002"
> +- reg			: SPI chip select
> +- interrupt-parent	: The parent interrupt controller
> +- interrupts		: The interrupt line the device is connected to
> +- interrupt-controller	: Marks the device node as an interrupt controller
> +- #interrupt-cells	: The number of cells to describe an IRQ, should be 2
> +- #address-cells	: Child device offset number of cells, typically 1
> +- #size-cells		: Child device size number of cells, typically 1
> +- spi-max-frequency	: Typically set to 3000000
> +- spi-cs_high		: SPI chip select direction
> +
> +Example:
> +
> +&mcspi1 {
> +	cpcap: pmic@0 {
> +		compatible = "motorola,cpcap", "ste,6556002";
> +		reg = <0>;	/* cs0 */
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		spi-max-frequency = <3000000>;
> +		spi-cs-high;
> +	};
> +};

The #address-cells should be 0 instead of 1 above.

Tony