From: Bjorn Helgaas <helgaas@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linaro-acpi@lists.linaro.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-acpi@vger.kernel.org
Subject: Re: [PATCH 2/2] ACPI: Ignore Consumer/Producer for QWord/DWord/Word Address Space
Date: Wed, 30 Nov 2016 09:56:17 -0600 [thread overview]
Message-ID: <20161130155616.GA9693@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20161130120425.GA13765@red-moon>
On Wed, Nov 30, 2016 at 12:04:25PM +0000, Lorenzo Pieralisi wrote:
> On Tue, Nov 29, 2016 at 12:43:34PM -0600, Bjorn Helgaas wrote:
> > Per ACPI spec r6.0, sec 6.4.3.5.1, 2, 3, Bit [0] of General Flags (the
> > Consumer/Producer bit) should be ignored for QWord/DWord/Word Address Space
> > descriptors. The Consumer/Producer bit is defined only for the Extended
> > Address Space descriptor.
> >
> > Ignore Consumer/Producer except for Extended Address Space descriptors.
> >
> > Note that for QWord/DWord/Word descriptors, we previously applied the
> > translation offset (_TRA) only when the Consumer/Producer bit was set.
>
> "..Consumer/Producer bit was clear" ? If that bit was set:
>
> struct acpi_resource_address->producer_consumer == ACPI_CONSUMER
>
> and we are not applying the _TRA offset in that case, right ?
Right, of course. How about this instead?
Note that for QWord/DWord/Word descriptors, we previously applied the
translation offset (_TRA) only for Producers, i.e., when the Consumer/
Producer bit was clear. This patch changes that: for those descriptors,
we ignore Consumer/Producer and always apply the translation offset.
> > This patch changes that: for those descriptors, we ignore Consumer/Producer
> > and always apply the translation offset.
> >
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > ---
> > drivers/acpi/resource.c | 16 +++++++++++-----
> > 1 file changed, 11 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> > index 2732d39e..b45cd8f 100644
> > --- a/drivers/acpi/resource.c
> > +++ b/drivers/acpi/resource.c
> > @@ -261,11 +261,16 @@ bool acpi_dev_resource_address_space(struct acpi_resource *ares,
> > * primary side. Non-bridge devices must list 0 for all Address
> > * Translation offset bits.
> > */
> > - if (addr->producer_consumer == ACPI_PRODUCER)
> > + if (ares->type == ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64) {
> > + if (addr->producer_consumer == ACPI_PRODUCER)
> > + offset = attr->translation_offset;
> > + else if (attr->translation_offset)
> > + pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
> > + attr->translation_offset);
> > + } else {
> > offset = attr->translation_offset;
> > - else if (attr->translation_offset)
> > - pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
> > - attr->translation_offset);
> > + }
> > +
> > start = attr->minimum + offset;
> > end = attr->maximum + offset;
> >
> > @@ -294,7 +299,8 @@ bool acpi_dev_resource_address_space(struct acpi_resource *ares,
> > return false;
> > }
> >
> > - if (addr->producer_consumer == ACPI_PRODUCER)
> > + if (ares->type == ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 &&
> > + addr->producer_consumer == ACPI_PRODUCER)
> > res->flags |= IORESOURCE_WINDOW;
> >
> > if (addr->info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2016-11-30 15:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 18:43 [PATCH 0/2] " Bjorn Helgaas
2016-11-29 18:43 ` [PATCH 1/2] ACPI: Combine acpi_dev_resource_address_space() and acpi_dev_resource_ext_address_space() Bjorn Helgaas
2016-11-29 18:43 ` [PATCH 2/2] ACPI: Ignore Consumer/Producer for QWord/DWord/Word Address Space Bjorn Helgaas
2016-11-30 12:04 ` Lorenzo Pieralisi
2016-11-30 15:56 ` Bjorn Helgaas [this message]
2016-11-30 16:24 ` Lorenzo Pieralisi
2016-11-29 20:56 ` [PATCH 0/2] " Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161130155616.GA9693@bhelgaas-glaptop.roam.corp.google.com \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=linaro-acpi@lists.linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®