mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: tpmdd-devel@lists.sourceforge.net, peterhuewe@gmx.de,
	tpmdd@selhorst.net, jgunthorpe@obsidianresearch.com,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 1/2] tpm: enhance read_log_of() to support Physical TPM event log
Date: Mon, 12 Dec 2016 16:40:04 +0200	[thread overview]
Message-ID: <20161212144004.ojrbp6e3whxyydi4@intel.com> (raw)
In-Reply-To: <1481434533-3453-2-git-send-email-nayna@linux.vnet.ibm.com>

On Sun, Dec 11, 2016 at 12:35:32AM -0500, Nayna Jain wrote:
> Physical TPMs use Open Firmware Device Tree bindings that are similar
> to the IBM Power virtual TPM to support event log. However, these
> properties store the values in different endianness for Physical
> and Virtual TPM.
> 
> This patch fixes the endianness issue by doing appropriate conversion
> based on Physical or Virtual TPM.

Will other device tree using firmwares than OF use the same bindings?

> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
> ---
>  drivers/char/tpm/tpm_of.c | 27 +++++++++++++++++++++++----
>  1 file changed, 23 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_of.c b/drivers/char/tpm/tpm_of.c
> index 7dee42d7..de57d4a 100644
> --- a/drivers/char/tpm/tpm_of.c
> +++ b/drivers/char/tpm/tpm_of.c
> @@ -27,6 +27,8 @@ int tpm_read_log_of(struct tpm_chip *chip)
>  	const u32 *sizep;
>  	const u64 *basep;
>  	struct tpm_bios_log *log;
> +	u32 size;
> +	u64 base;
>  
>  	log = &chip->log;
>  	if (chip->dev.parent && chip->dev.parent->of_node)
> @@ -41,18 +43,35 @@ int tpm_read_log_of(struct tpm_chip *chip)
>  	if (sizep == NULL || basep == NULL)
>  		return -EIO;
>  
> -	if (*sizep == 0) {
> +	/*
> +	 * For both vtpm/tpm, firmware has log addr and log size in big
> +	 * endian format. But in case of vtpm, there is a method called
> +	 * sml-handover which is run during kernel init even before
> +	 * device tree is setup. This sml-handover function takes care
> +	 * of endianness and writes to sml-base and sml-size in little
> +	 * endian format. For this reason, vtpm doesn't need conversion
> +	 * but physical tpm needs the conversion.
> +	 */
> +	if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0) {
> +		size = be32_to_cpup(sizep);
> +		base = be64_to_cpup(basep);
> +	} else {
> +		size = *sizep;
> +		base = *basep;
> +	}
> +
> +	if (size == 0) {
>  		dev_warn(&chip->dev, "%s: Event log area empty\n", __func__);
>  		return -EIO;
>  	}
>  
> -	log->bios_event_log = kmalloc(*sizep, GFP_KERNEL);
> +	log->bios_event_log = kmalloc(size, GFP_KERNEL);
>  	if (!log->bios_event_log)
>  		return -ENOMEM;
>  
> -	log->bios_event_log_end = log->bios_event_log + *sizep;
> +	log->bios_event_log_end = log->bios_event_log + size;
>  
> -	memcpy(log->bios_event_log, __va(*basep), *sizep);
> +	memcpy(log->bios_event_log, __va(base), size);
>  
>  	return 0;
>  }
> -- 
> 2.5.0
> 

Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

/Jarkko

  reply	other threads:[~2016-12-12 14:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-11  5:35 [PATCH v7 0/2] securityfs support for TPM 2.0 firmware " Nayna Jain
2016-12-11  5:35 ` [PATCH v7 1/2] tpm: enhance read_log_of() to support Physical TPM " Nayna Jain
2016-12-12 14:40   ` Jarkko Sakkinen [this message]
2016-12-16 16:28     ` Nayna
2016-12-11  5:35 ` [PATCH v7 2/2] tpm: add securityfs support for TPM 2.0 firmware " Nayna Jain
2017-01-02 22:12   ` Jarkko Sakkinen
2017-01-03  7:39     ` Nayna
2017-01-03 13:33       ` Jarkko Sakkinen
2017-01-04  8:38         ` Nayna
2017-01-04 13:01           ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161212144004.ojrbp6e3whxyydi4@intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=nayna@linux.vnet.ibm.com \
    --cc=peterhuewe@gmx.de \
    --cc=tpmdd-devel@lists.sourceforge.net \
    --cc=tpmdd@selhorst.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome