mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
To: linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	kernel@savoirfairelinux.com
Cc: mark@embeddedarm.com, kris@embeddedarm.com,
	horms+renesas@verge.net.au, treding@nvidia.com,
	jonathanh@nvidia.com, f.fainelli@gmail.com,
	fabio.estevam@nxp.com, kernel@pengutronix.de,
	shawnguo@kernel.org, linux@armlinux.org.uk, linux@roeck-us.net,
	wim@iguana.be, mark.rutland@arm.com, robh+dt@kernel.org,
	damien.riegel@savoirfairelinux.com,
	lucile.quirion@savoirfairelinux.com, olof@lixom.net,
	arnd@arndb.de, suzuki.poulose@arm.com, linus.walleij@linaro.org,
	will.deacon@arm.com, yamada.masahiro@socionext.com,
	Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Subject: [PATCH 0/6] Add board support for TS-4600
Date: Wed, 14 Dec 2016 18:12:30 -0500	[thread overview]
Message-ID: <20161214231237.17496-1-sebastien.bourdelin@savoirfairelinux.com> (raw)

This patch serie adds support for the TS-4600 boards rev A and B. These
boards, manufactured by Technologic Systems, are based on an i.MX28.

This serie include the support for the watchdog which could be enable
at Linux boot time depending on the bootloader.

The watchdog and few peripherals are implemented in a FPGA, and can
only be access using a custom GPIOs bit-banged bus which is called the
NBUS by Technologic Systems.
A driver for this bus is also included and used by the watchdog.

Sebastien Bourdelin (6):
  of: documentation: add bindings documentation for TS-4600
  ARM: dts: TS-4600: add basic device tree
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  bus: add driver for the Technologic Systems NBUS
  ARM: dts: TS-4600: add NBUS support
  watchdog: ts4600: add driver for TS-4600 watchdog

 .../devicetree/bindings/arm/technologic.txt        |   5 +
 Documentation/devicetree/bindings/bus/ts-nbus.txt  |  50 +++
 .../devicetree/bindings/watchdog/ts4600-wdt.txt    |  16 +
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/imx28-ts4600-common.dtsi         | 126 ++++++
 arch/arm/boot/dts/imx28-ts4600-rev-a.dts           |  22 +
 arch/arm/boot/dts/imx28-ts4600-rev-b.dts           |  22 +
 drivers/bus/Kconfig                                |   9 +
 drivers/bus/Makefile                               |   1 +
 drivers/bus/ts-nbus.c                              | 451 +++++++++++++++++++++
 drivers/watchdog/Kconfig                           |  10 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/ts4600_wdt.c                      | 213 ++++++++++
 include/linux/ts-nbus.h                            |  17 +
 14 files changed, 945 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/ts-nbus.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-a.dts
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-b.dts
 create mode 100644 drivers/bus/ts-nbus.c
 create mode 100644 drivers/watchdog/ts4600_wdt.c
 create mode 100644 include/linux/ts-nbus.h

-- 
2.10.2

             reply	other threads:[~2016-12-14 23:12 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-14 23:12 Sebastien Bourdelin [this message]
2016-12-14 23:12 ` [PATCH 1/6] of: documentation: add bindings documentation " Sebastien Bourdelin
2016-12-19 22:05   ` Rob Herring
2016-12-14 23:12 ` [PATCH 2/6] ARM: dts: TS-4600: add basic device tree Sebastien Bourdelin
2016-12-14 23:12 ` [PATCH 3/6] dt-bindings: bus: Add documentation for the Technologic Systems NBUS Sebastien Bourdelin
2016-12-19 22:12   ` Rob Herring
2016-12-14 23:12 ` [PATCH 4/6] bus: add driver " Sebastien Bourdelin
2016-12-30  7:58   ` Linus Walleij
2017-02-01 19:56     ` Sebastien Bourdelin
2017-02-03 13:51       ` Linus Walleij
2017-02-03 15:56         ` Sebastien Bourdelin
2016-12-14 23:12 ` [PATCH 5/6] ARM: dts: TS-4600: add NBUS support Sebastien Bourdelin
2016-12-30  8:01   ` Linus Walleij
2016-12-14 23:12 ` [PATCH 6/6] watchdog: ts4600: add driver for TS-4600 watchdog Sebastien Bourdelin
2016-12-15 10:28   ` kbuild test robot
2016-12-19 22:13   ` Rob Herring
2016-12-23  1:53   ` Guenter Roeck
2016-12-14 23:12 ` [PATCH 2/6] ARM: dts: TS-4600: add basic device tree Sebastien Bourdelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161214231237.17496-1-sebastien.bourdelin@savoirfairelinux.com \
    --to=sebastien.bourdelin@savoirfairelinux.com \
    --cc=arnd@arndb.de \
    --cc=damien.riegel@savoirfairelinux.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=fabio.estevam@nxp.com \
    --cc=horms+renesas@verge.net.au \
    --cc=jonathanh@nvidia.com \
    --cc=kernel@pengutronix.de \
    --cc=kernel@savoirfairelinux.com \
    --cc=kris@embeddedarm.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=lucile.quirion@savoirfairelinux.com \
    --cc=mark.rutland@arm.com \
    --cc=mark@embeddedarm.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=suzuki.poulose@arm.com \
    --cc=treding@nvidia.com \
    --cc=will.deacon@arm.com \
    --cc=wim@iguana.be \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®