From: Masanari Iida <standby24x7@gmail.com>
To: linux-kernel@vger.kernel.org, ulf.hansson@linaro.org,
khilman@baylibre.com, horms+renesas@verge.net.au,
linux-mmc@vger.kernel.org
Cc: Masanari Iida <standby24x7@gmail.com>
Subject: [PATCH] [linux-next] Docs: DT: MMC: Fix typo in mmc
Date: Fri, 6 Jan 2017 23:50:43 +0900 [thread overview]
Message-ID: <20170106145043.4859-1-standby24x7@gmail.com> (raw)
This patch fix some spelling typo found in devicetree/bindings/mmc.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt | 2 +-
Documentation/devicetree/bindings/mmc/sdhci-st.txt | 2 +-
Documentation/devicetree/bindings/mmc/sdhci.txt | 2 +-
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
index 7f95ec400863..50bf611a4d2c 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
@@ -17,7 +17,7 @@ Required properties:
"core" - Main peripheral bus clock
"clkin0" - Parent clock of internal mux
"clkin1" - Other parent clock of internal mux
- The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the
+ The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
clock rate requested by the MMC core.
Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 3cd4c43a3260..230fd696eb92 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -38,7 +38,7 @@ Optional properties:
- bus-width: Number of data lines.
See: Documentation/devicetree/bindings/mmc/mmc.txt.
-- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for
+- max-frequency: Can be 200MHz, 100MHz or 50MHz (default) and used for
configuring the CCONFIG3 in the mmcss.
See: Documentation/devicetree/bindings/mmc/mmc.txt.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt
index 1c95a1a555c3..0e9923a64024 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci.txt
@@ -5,7 +5,7 @@ host controllers refer to the mmc[1] bindings.
Optional properties:
- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
- property corresponds to the bits in the sdhci capabilty register. If the bit
+ property corresponds to the bits in the sdhci capability register. If the bit
is on in the mask then the bit is incorrect in the register and should be
turned off, before applying sdhci-caps.
- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 7fd17c3da116..40b94a5369a1 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -16,7 +16,7 @@ Required Properties:
each child-node representing a supported slot. There should be atleast one
child node representing a card slot. The name of the child node representing
the slot is recommended to be slot@n where n is the unique number of the slot
- connnected to the controller. The following are optional properties which
+ connected to the controller. The following are optional properties which
can be included in the slot child node.
* reg: specifies the physical slot number. The valid values of this
--
2.11.0.161.g6610af872f64
next reply other threads:[~2017-01-06 14:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-06 14:50 Masanari Iida [this message]
2017-01-17 15:07 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170106145043.4859-1-standby24x7@gmail.com \
--to=standby24x7@gmail.com \
--cc=horms+renesas@verge.net.au \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome