From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Nayna <nayna@linux.vnet.ibm.com>
Cc: tpmdd-devel@lists.sourceforge.net, peterhuewe@gmx.de,
tpmdd@selhorst.net, jgunthorpe@obsidianresearch.com,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] tpm: implement TPM 2.0 capability to get active PCR banks
Date: Fri, 13 Jan 2017 18:45:24 +0200 [thread overview]
Message-ID: <20170113164524.4xhqhbsfhgzyv4y4@intel.com> (raw)
In-Reply-To: <5878809C.8020408@linux.vnet.ibm.com>
On Fri, Jan 13, 2017 at 12:54:12PM +0530, Nayna wrote:
>
>
> On 01/12/2017 11:55 PM, Jarkko Sakkinen wrote:
> > On Thu, Jan 12, 2017 at 11:58:09AM -0500, Nayna Jain wrote:
> > > This patch implements the TPM 2.0 capability TPM_CAP_PCRS to
> > > retrieve the active PCR banks from the TPM. This is needed
> > > to enable extending all active banks as recommended by TPM 2.0
> > > TCG Specification.
> > >
> > > Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
> > > ---
> > > drivers/char/tpm/tpm.h | 4 +++
> > > drivers/char/tpm/tpm2-cmd.c | 59 +++++++++++++++++++++++++++++++++++++++++++++
> > > 2 files changed, 63 insertions(+)
> > >
> > > diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> > > index 1ae9768..dddd573 100644
> > > --- a/drivers/char/tpm/tpm.h
> > > +++ b/drivers/char/tpm/tpm.h
> > > @@ -127,6 +127,7 @@ enum tpm2_permanent_handles {
> > > };
> > >
> > > enum tpm2_capabilities {
> > > + TPM2_CAP_PCRS = 5,
> > > TPM2_CAP_TPM_PROPERTIES = 6,
> > > };
> > >
> > > @@ -187,6 +188,8 @@ struct tpm_chip {
> > >
> > > const struct attribute_group *groups[3];
> > > unsigned int groups_cnt;
> > > +
> > > + u16 active_banks[7];
> > > #ifdef CONFIG_ACPI
> > > acpi_handle acpi_dev_handle;
> > > char ppi_version[TPM_PPI_VERSION_LEN + 1];
> > > @@ -545,4 +548,5 @@ int tpm2_auto_startup(struct tpm_chip *chip);
> > > void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
> > > unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
> > > int tpm2_probe(struct tpm_chip *chip);
> > > +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip);
> > > #endif
> > > diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> > > index 6eda239..87388921 100644
> > > --- a/drivers/char/tpm/tpm2-cmd.c
> > > +++ b/drivers/char/tpm/tpm2-cmd.c
> > > @@ -83,6 +83,12 @@ struct tpm2_get_tpm_pt_out {
> > > __be32 value;
> > > } __packed;
> > >
> > > +struct tpm2_tpms_pcr_selection {
> > > + __be16 hash_alg;
> > > + u8 size_of_select;
> > > + u8 pcr_select[3];
> > > +} __packed;
> >
> > Please move this right before tpm2_get_pcr_allocation.
> > Drop 'tpms_'.
>
> Sure, will do this. But didn't understand why. I think all structs are
> defined in start of file..
>
> Thanks & Regards,
> - Nayna
>
> >
> > > +
> > > struct tpm2_get_random_in {
> > > __be16 size;
> > > } __packed;
> > > @@ -993,8 +999,61 @@ int tpm2_auto_startup(struct tpm_chip *chip)
> > > }
> > > }
> > >
> > > + rc = tpm2_get_pcr_allocation(chip);
> > > +
> >
> > Please have this call in the commit where you actually use it
> > Does not make any sense here
> >
> > > out:
> > > if (rc > 0)
> > > rc = -ENODEV;
> > > return rc;
> > > }
> > > +
> > > +/**
> > > + * tpm2_get_pcr_allocation() - get TPM active PCR banks.
> > > + *
> > > + * @chip: TPM chip to use.
> > > + *
> > > + * Return: Same as with tpm_transmit_cmd.
> > > + */
> > > +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
> > > +{
> > > + struct tpm2_tpms_pcr_selection pcr_selection;
> > > + struct tpm_buf buf;
> > > + void *marker;
> > > + unsigned int count = 0;
> > > + int rc;
> > > + int i;
> > > +
> > > + rc = tpm_buf_init(&buf, TPM2_ST_NO_SESSIONS, TPM2_CC_GET_CAPABILITY);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + tpm_buf_append_u32(&buf, TPM2_CAP_PCRS);
> > > + tpm_buf_append_u32(&buf, 0);
> > > + tpm_buf_append_u32(&buf, 1);
> > > +
> > > + rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, 0,
> > > + "get tpm pcr allocation");
> > > + if (rc < 0)
> > > + goto out;
> > > +
> > > + count = be32_to_cpup(
> > > + (__be32 *) &buf.data[TPM_HEADER_SIZE + 5]);
> >
> > Please do not add a space after cast. This has been an issue in your
> > previous patches too so try to do it right next time.
It is only used internally by that function. I think this would
make sense for other structures too that are only used by one
function.
/Jarkko
next prev parent reply other threads:[~2017-01-13 16:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-12 16:58 [PATCH v3 0/2] tpm: enhance TPM 2.0 extend function to support multiple " Nayna Jain
2017-01-12 16:58 ` [PATCH v3 1/2] tpm: implement TPM 2.0 capability to get active " Nayna Jain
2017-01-12 18:25 ` Jarkko Sakkinen
2017-01-13 7:24 ` Nayna
2017-01-13 16:45 ` Jarkko Sakkinen [this message]
2017-01-12 16:58 ` [PATCH v3 2/2] tpm: enhance TPM 2.0 PCR extend to support multiple banks Nayna Jain
2017-01-12 18:20 ` Jarkko Sakkinen
2017-01-13 7:14 ` Nayna
2017-01-13 16:43 ` Jarkko Sakkinen
2017-01-17 7:53 ` Nayna
2017-01-17 16:13 ` Jarkko Sakkinen
2017-01-17 16:26 ` Nayna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170113164524.4xhqhbsfhgzyv4y4@intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®