From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-kernel@vger.kernel.org, ldewangan@nvidia.com
Subject: [PATCH v2 06/15] staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling()
Date: Tue, 17 Jan 2017 04:24:53 -0500 [thread overview]
Message-ID: <20170117092502.6951-7-masneyb@onstation.org> (raw)
In-Reply-To: <20170117092502.6951-1-masneyb@onstation.org>
When isl29028_set_proxim_sampling() fails, it was up to both callers to
log the failure message. This patch moves the logging into
isl29028_set_proxim_sampling() to reduce the overall amount of code in
the driver.
Signed-off-by: Brian Masney <masneyb@onstation.org>
---
drivers/staging/iio/light/isl29028.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
index 7074e62..bd85ccb 100644
--- a/drivers/staging/iio/light/isl29028.c
+++ b/drivers/staging/iio/light/isl29028.c
@@ -78,18 +78,29 @@ struct isl29028_chip {
static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
unsigned int sampling)
{
+ struct device *dev = regmap_get_device(chip->regmap);
static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
- int sel;
unsigned int period = DIV_ROUND_UP(1000, sampling);
+ int sel, ret;
for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) {
if (period >= prox_period[sel])
break;
}
- return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
- ISL29028_CONF_PROX_SLP_MASK,
- sel << ISL29028_CONF_PROX_SLP_SH);
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ ISL29028_CONF_PROX_SLP_MASK,
+ sel << ISL29028_CONF_PROX_SLP_SH);
+
+ if (ret < 0) {
+ dev_err(dev, "%s(): Error %d setting the proximity sampling\n",
+ __func__, ret);
+ return ret;
+ }
+
+ chip->prox_sampling = sampling;
+
+ return ret;
}
static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
@@ -291,14 +302,6 @@ static int isl29028_write_raw(struct iio_dev *indio_dev,
}
ret = isl29028_set_proxim_sampling(chip, val);
- if (ret < 0) {
- dev_err(dev,
- "Setting proximity samp_freq fail, err %d\n",
- ret);
- break;
- }
-
- chip->prox_sampling = val;
break;
case IIO_LIGHT:
if (mask != IIO_CHAN_INFO_SCALE) {
@@ -437,10 +440,8 @@ static int isl29028_chip_init_and_power_on(struct isl29028_chip *chip)
}
ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
- if (ret < 0) {
- dev_err(dev, "setting the proximity, err = %d\n", ret);
+ if (ret < 0)
return ret;
- }
ret = isl29028_set_als_scale(chip, chip->lux_scale);
if (ret < 0)
--
2.9.3
next prev parent reply other threads:[~2017-01-17 9:26 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 9:24 [PATCH v2 00/15] staging cleanups Brian Masney
2017-01-17 9:24 ` [PATCH v2 01/15] staging: iio: isl29028: made alignment of variables in struct isl29028_chip consistent Brian Masney
2017-01-21 14:29 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 02/15] staging: iio: isl29028: fix alignment of function arguments Brian Masney
2017-01-21 14:30 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 03/15] staging: iio: isl29028: combine isl29028_proxim_get() and isl29028_read_proxim() Brian Masney
2017-01-21 14:41 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 04/15] staging: iio: isl29028: change newlines to improve readability Brian Masney
2017-01-21 14:41 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 05/15] staging: iio: isl29028: remove unused define ISL29028_DEV_ATTR Brian Masney
2017-01-21 14:41 ` Jonathan Cameron
2017-01-17 9:24 ` Brian Masney [this message]
2017-01-21 14:37 ` [PATCH v2 06/15] staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling() Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 07/15] staging: iio: isl29028: move failure logging into isl29028_set_als_scale() Brian Masney
2017-01-21 14:42 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 08/15] staging: iio: isl29028: made error messages consistent Brian Masney
2017-01-21 14:42 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 09/15] staging: iio: isl29028: remove unnecessary error logging in isl29028_chip_init_and_power_on() Brian Masney
2017-01-21 14:42 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 10/15] staging: iio: isl29028: remove out of memory log message Brian Masney
2017-01-21 14:43 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 11/15] staging: iio: isl29028: remove unnecessary parenthesis Brian Masney
2017-01-21 14:43 ` Jonathan Cameron
2017-01-17 9:24 ` [PATCH v2 12/15] staging: iio: isl29028: remove enable flag from isl29028_enable_proximity() Brian Masney
2017-01-21 14:48 ` Jonathan Cameron
2017-01-17 9:25 ` [PATCH v2 13/15] staging: iio: isl29028: only set proximity sampling rate when proximity is enabled Brian Masney
2017-01-21 14:49 ` Jonathan Cameron
2017-01-17 9:25 ` [PATCH v2 14/15] staging: iio: isl29028: only set ALS scale when ALS/IR sensing " Brian Masney
2017-01-21 14:52 ` Jonathan Cameron
2017-01-17 9:25 ` [PATCH v2 15/15] staging: iio: isl29028: add runtime power management support Brian Masney
2017-01-21 14:58 ` Jonathan Cameron
2017-01-21 16:49 ` Brian Masney
2017-01-21 17:35 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170117092502.6951-7-masneyb@onstation.org \
--to=masneyb@onstation.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=ldewangan@nvidia.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®